Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 9, 1996.
As of Saturday, December 28th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
87700*, 87706+ 88700*, 88706+1988-1995 GM C2500/3500 2WD 7.4L 1988-1995 GM C2500/3500 4WD 7.4L 1990 GM C1500/454SS 2WD 7.4L* with Air Injection Reaction + without Air Injection Reaction

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-182-16
  • Executive Order 182-16 / D182-16
  • ARB # D-182-16
  • Executive Order No: D-182-16
  • C.A.R.B. No. D-182-16
  • Resolution D-182-16
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-182-16 PDF

D-182-16 Document:

CARB_D-182-16

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—182—16 Relating to Exemptions Under Section 27156 of the Vehicle Code wWALKER MANUFACTURING COMPANY TUBULAR EXHAUST HEADERS Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That installation of the Tubular Exhaust Headers, manufactured by Walker Manufacturing Company of 2701 N. Dettman Road, Jackson, Michigan 49%201, has been found not to reduce the effectiveness of the applicable vehicle pollution control system, and therefore, the Tubular Exhaust Headers are exempt from the prohibitions of Section 27156 of the Vehicle Code for use on those vehicles listed in the appendix. This Executive Order is valid provided that installation instructions for the headers will not recommend tuning the vehicle to specifications different from those submitted by the vehicle manufacturer. Changes made to the design or operating conditions of the headers, as exempt Temss by the ARB, which may adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the headers using an identification other than that shown in this Executive Order or marketing of the headers for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. Exemption of the headers shall not be construed as an exemption to sell, offer for sale, or advertise any components of the headers as individual devices. This Executive Order does not constitute any opinion as to the effect the use of the headers may have on any warranty either expressed or implied by the vehicle manufacturer. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF WALKER MANUFACTURING COMPANY‘S TUBULAR EXHAUST HEADERS. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten—day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the Executive Order may not be revoked until a determination after the hearing that grounds for revocation exist.:

WALKER MANUFACTURING COMPANY EXECUTIVE ORDER D—182—16 TUBULAR EXHAUST HEADER (Page 2 of 2) Executed at El Monte, California, this 924 ay ecember 1996. d, Chief perations Division

APPENDIX Walker Tubular Exhaust Headers Part Number Vehicle Application Ceramic Paint s7700*/ s8700*/ 1988—95 CM 7.4 L C2500/3500 2wD 87706+ 88706+ 1988—95 GM 7.4 L K2500/3500 4WD 1990 GM 7.4 L C1500/454SS 2WD 87701 88701 1986—95 Ford 5.0 L F150/250 2WD/4wWD 1985—95 Ford 5.0 L Bronco 4WD 87702*/ 88702*/ 1988—93 GM 5.0—5.7 L C1500/2500 2wD 87707+ 88707+ 1988—93 GM 5.0—5.7 L K1500/2500 4wD 87703 88703 1988—93 Ford 7.5 L F150/250/350 2wD/4wD s7704/ s8704/ 1986—93 Ford 5.0 L Mustang LX/GT seil7 85117 86117 85117 1986—92 Ford 5.0 L Lincoln Mark VII 87705 88705 1982—87 GM 5.0 L Camaro/Firebird 1992 GM 5.0 L Camaro 228 TPI 1988—92 GM 5.0 L Camaro RS TPI 1991—92 GM 5.0 L Firebird TPI 1988—92 GM 5.0 L Firebird Formula TPI * with Air Injection Reaction + without Air Injection Reaction w


Document Created: 2005-09-01 12:39:54
Document Modified: 2005-09-01 12:39:54

Previous E.O. D-182-15 | Previous E.O. D-181 | Next E.O. D-182-17 | Next E.O. D-183