Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on August 15, 1995.
As of Sunday, December 22nd, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

ModelsRemarks
The following 4.2 liter vehicle applications: 1981-1983 Jeep CJ-5, 1981-1986 Jeep CJ-7, 1987-1990 Jeep Wrangler, 1981-1987 J Series Vehicles, 1982-1986 Scrambler, and 1981-1987 Grand Wagoneer. Vehicles with manual transmission use kit # P5249610 and automatic transmissions use kit # P5249686.The installation of the kit requires the removal of all emission and fuel delivery related components that are located within the engine compartment. The following items are a sample of the components removed: Air cleaner assembly, carburetor/throttle-body, intake manifold, distributor, electronic control module (ECM), oxygen sensor, carbon canister, EGR valve, air injection system (air tubes plugged), fuel pump, and other related vacuum valves and lines. The kit includes the following Chrysler Components: Heated Oxygen sensor, intake manifold with a fuel injection rail, throttle body with open element air filter, electronic advance distributor, the factory EGR system is removed and discarded, electronic fuel pump, carbon canister, ECM, and a coolant, MAP & MAT sensor. Mopar performance will provide a tune-up and vacuum label with the kit

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-265-7
  • Executive Order 265-7 / D265-7
  • ARB # D-265-7
  • Executive Order No: D-265-7
  • C.A.R.B. No. D-265-7
  • Resolution D-265-7
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-265-7 PDF

D-265-7 Document:


CARB_D-265-7

                                                             (Page 1 of 2)

                                State of California
                                AIR RESOURCES BOARD


                              EXECUTIVE ORDER D—265—7
                     Relating to Exemptions Under Section 27156 >
                                of the Vehicle Code


                                MOPAR PERFORMANCE
                  JEEP 4.2 LITER MULTI—POINT FUEL INJECTION KIT

 Pursuant to the authority vested in the Air Resources Board by Section 27156
 of the Vehicle Code; and

 Pursuant to the authority vested in the undersigned by Section 39515 and
 Section 39516 of the Health and Safety Code and Executive Order G—45—9;

IT IS ORDERED AND RESOLVED: That the installation of the Jeep 4.2 Liter
Multi—Point Fuel Injection Kit manufactured by Mopar Performance, 26311
Lawrence Avenue, Center Line, MI 48015—9760 has been found not to reduce the
effectiveness of the applicable vehicle pollution control system and,
therefore, is exempt from the prohibitions of Section 27156 of the Vehicle
Code for the following 4.2 liter vehicle applications:

 1981—83 Jeep CJ—5, 1981—86 Jeep CJ—7, 1987—90 Jeep Wrangler, 1981—87 J
Series Vehicles, 1982—86 Scrambler, and 1981—87 Grand Wagoneer.      Vehicles
with manual transmission use kit # P5249610 and automatic transmissions use
kit # P5249686.

 The installation of the kit requires the removal of all emission and fuel
 delivery related components that are located within the engine compartment.
 The following items are a sample of the components removed: Air cleaner
 assembly, carburetor/throttle—body, intake manifold, distributor, electronic
 control module (ECM), oxygen sensor, carbon canister, EGR valve, air
‘injection system (air tubes plugged), fuel pump, and other related vacuum
valives and lines.

The kit includes the following new Chrysler components: Heated oxygen
sensor, intake manifold with a fuel injection rail, throttle body with open
element air filter, electronic advance distributor, the factory EGR system
is removed and discarded, electronic fuel pump, carbon canister, ECM, and a
new coolant, MAP, and MAT sensor.     ~Mopar performance will provided a new
tune—up and vacuum label with the kit.
This Executive Order is valid provided that the installation instructions
for the Jeep 4.2 Liter Multi—Point Fuel Injection Kit will not recommend
tuning the vehicle to specifications different from those of the vehicle
manufacturer.

Changes made to the design or operating conditions of the Jeep 4.2 Liter
Multi—Point Fuel Injection Kit, as exempt by the Air Resources Board, which
adversely affect the performance of a vehicle‘s pollution control system
shall invalidate this Executive Order.


MOPAR PERFORMANCE                                       EXECUTIVE ORDER D—265—7
JEEP 4.2 LITER MULTI—POINT FUEL INJECTION KIT            (Page 2 of 2)



Marketing of the Jeep 4.2 Liter Multi—Point Fuel Injection Kit using any
identification other than that shown in this Executive Order or marketing of
the Jeep 4.2 Liter Multi—Point Fuel Injection Kit for an application other
than those listed in this Executive Order shall be prohibited unless prior
approval is obtained from the Air Resources Board. Exemption of the Jeep
4.2 Liter Multi—Point Fuel Injection Kit shall not be construed as an
exemption to sell, offer for sale, or advertise any component of the k1t as
an individual device.

This Executive Order does not constitute any opinion as to the effect that
the use of the Jeep 4.2 Liter Multi—Point Fuel Injection Kit may have on any
warranty either expressed or implied by the vehicle manufacturer.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, .
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY
CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED
BENEFITS OF MOPAR PERFORMANCE‘S JEEP 4.2 LITER MULTI—POINT FUEL INJECTION
KIT.

No claim of any kind, such as "Approved by the Air Resources Board" may be
made with respect to the action taken herein in any advertising or other
oral or written communication.

Violation of any of the above conditions shall be grounds for revocation of
this order. The order may be revoked only after ten day written notice of
intention to revoke the order, in which period the holder of the order may
request in writing a hearing to contest the proposed revocation. If a
hearing is requested, it shall be held within ten days of receipt of the
request and the order may not be revoked until a determination after hearing
that grounds for revocation exist.

Executed at El Monte, California, this     _/ §   day     August 1995.




                                       Assistant Division Chief.
                                     —. Mobile Source Division



Document Created: 2005-09-01 12:15:25
Document Modified: 2005-09-01 12:15:25

Previous E.O. D-265-6 | Previous E.O. D-264 | Next E.O. D-265-8 | Next E.O. D-266