Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on January 6, 1993.
As of Sunday, December 29th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsRemarks
1412-161993 & older GM 265-400 C.I.D.Magnum Roller Rocker Arms, Rocker Ratio 1.6

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-279-4
  • Executive Order 279-4 / D279-4
  • ARB # D-279-4
  • Executive Order No: D-279-4
  • C.A.R.B. No. D-279-4
  • Resolution D-279-4
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-279-4 PDF

D-279-4 Document:

CARB_D-279-4

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—279—4 Relating to Exemptions Under Section 27156 of the Vehicle Code COMPETITION CAMS, INC. ROCKER ARMS Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—5; IT IS ORDERED AND RESOLVED: That the installation of the rocker arms listed in Attachment A manufactured by Competition Cams, Inc. of 3406 Democrat Road., Memphis, Tennessee 38118 have been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, are exempt from the prohibitions of Section 27156 of the Vehicle | Code for 1993 and older model—year General Motors vehicles equipped with 200 CID to 454 CID gasoline engines. This Executive Order is valid provided that installation instructions for these rocker arms will not recommend tuning the vehicle to specifications different from those submitted by Competition Cams, Inc. Changes made to the design or operating conditions of the rocker arms, as exempt by the Air Resources Board, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of these rocker arms using any identification other than that shown. in this Executive Order or marketing of these rocker arms for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of these rocker arms shall not be construed as exemption to sell, offer for sale, or advertise any component of the kit as an individual device. This Executive Order does not constitute any opinion as to the effect the use of these rocker arms may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF COMPETITION CAMS, INC.‘S ROCKER ARMS.

COMPETITION CAMS, INC. EXECUTIVE ORDER D—279—4 ROCKER ARMS (Page 2 of 2) No claim of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after ten day written notice of intention to revoke the order, in which period the holder . of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. Executed at El Monte, California, this C; day of January, 1993. +, Summerfie stant Division Chief Mobile Source Division Attachment

Executive Order D—279—4 Attachment A Competition Cam Rocker Arms Part Number EngineSize Rocker Ratio Magnum Roller Rocker Arms 1412—16 265 CID—400 CID 1.6 1416—16 265 CID~400 CID 1.6 1411—16 396 CID~454 CID 1.7 1412—12 200 CID—262 CID 1.5 1416—12 200 CID—262 CID 1.6 Aluminum Rocker Arms 1001~16 265 CID—400 CID 1002—16 265 CID—400 CID 1004—16 265 CID—400 CID 1005—16 265 CID—400 CID 1021—16 396 CID—454 CID 1001—12 200 CID—262 CID 1002—12 200 CID—262 CID 1004—12 200 CID—262 CID eb ht d5 ob opebl uh dospes 1005—12 200 CID—262 CID £000% & + «60 k0% 1021—12 200 CID—262 CID ~1 o in i in i n un h in Bobe High—Tech Rocker Arms 1101—16 265 CID—400 CID 1102—16 265 CID—400 CID 1104—16 265 CID—400 CID 1105—16 265 CID—400 CID 1107—16 265 CID—400 CID 1108—16 265 CID—400 CID 1120—16 396 CID—454 CID 1123—16 396 CID—454 CID 1128—16 396 CID—454 CID 1101—12 200 CID—262 CID 1102—12 200 CID—262 CID 1104—12 200 CID—262 CID 1105—12 200 CID—262 CID 1107—12 200 CID—262 CID €0 6 k k k e e k 6 k k k o 1108—12 200 CID—262 CID dodet bfded ut dutobut tb fusopedpbopdobsobs y 1 a in o un o uw in in o in on in Pro—Magnum Rocker Arms 1301—16 265 CID—400 CID N 1302—16 265 CID—400 CID 1304—16 265 CID—400 CID bo 1305—16 265 CID—400 CID 1320—16 396 CID—454 CID 1301—12 200 CID—262 CID 1302—12 200 CID—262 CID +o+ & «0+ ks 1304—12 200 CID—262 CID Dob 1305—12 200 CID—262 CID en aik ad eril en e e e ad + o uons n ue a


Document Created: 2005-09-01 12:43:11
Document Modified: 2005-09-01 12:43:11

Previous E.O. D-279-3 | Previous E.O. D-278 | Next E.O. D-279-5 | Next E.O. D-280