Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on September 6, 2000.
As of Thursday, January 2nd, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
4029082000 MY 2.0 liter Nissan Sentra SE and INfiniti G20Kit includes an open-element air filter, high flow adapter, and various support brackets and hardware.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-436-8
  • Executive Order 436-8 / D436-8
  • ARB # D-436-8
  • Executive Order No: D-436-8
  • C.A.R.B. No. D-436-8
  • Resolution D-436-8
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-436-8 PDF

D-436-8 Document:

CARB_D-436-8

K#3 . State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—436—8 Relating to Exemptions Under Section 27156 of the Vehicle Code STEVE MILLEN SPORTPARTS, INC. STILLEN HIGH FLOW INTAKE SYSTEM PART NO. 402908 Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That installation of the Stillen High Flow intake system, manufactured by Steve Millen Sportparts, Inc. of 3176 Airway Avenue, Costa Mesa, California 92626, has been found not to reduce the effectiveness of the applicable vehicle pollution control system, and therefore, the Stillen High Flow intake system, part no. 402908, is exempt from the prohibitions of Section 27156 of the Vehicle Code for installation on the following Nissan Motor Company, Ltd. vehicles: Part No. Model—Year Vehicle Model Engine 402908 2000 Nissan Sentra SE & Infiniti G20 2.0 liter This exemption is based on examination of the On—Board Diagnostic II (OBD II) system of a 2000 model—year Nissan Sentra SE with Steve Millen Sportparts, Inc.‘s Stillen High Flow intake system and engineering evaluation of the emission impact of the Stillen High Flow intake system on the vehicle. Based on results of the OBD II system test and evaluation of the design and operating principles of the Stillen High Flow intake system, it is concluded that the Stillen High Flow intake system will not affect the operation of the vehicles‘ OBD !I system and will not adversely affect their exhaust emissions when tested using the Cold—Start CVS—75 Federal Test Procedure (FTP). However, the ARB finds that reasonable grounds exist to believe that use of the Stillen High Flow intake system may adversely affect emissions of motor vehicles when operating under conditions outside the parameters of the Cold—Start CVS—75 FTP. Accordingly, the ARB reserves the right to conduct additional emission tests, in the future, as such tests are developed, that will more adequately measure emissions from all cycle phases. If such test results demonstrate that the Stillen High Flow intake system adversely affects emissions during off—cycle conditions (defined as those conditions which are beyond the parameters of the Cold—Start CVS—75 FTP), this Executive Order shall be effectively rescinded as of the date the test results are validated. Further, if such test results or other evidence provides the ARB with reasons to suspect that the Stillen High Flow intake system will affect the durability of

STEVE MILLEN SPORTPARTS, INC. EXECUTIVE ORDER D—436—8 STILLEN HIGH FLOW INTAKE SYSTEM (Page 2 of 3) PART NO. 402908 the emission control system, Steve Millen Sportparts, Inc. shall be required to submit durability data to show that the durability of the vehicle emission control system is not, in fact, affected and/or that the add—on or modified part demonstrates adequate durability. This Executive Order is valid provided that installation instructions for the Stillen High Flow intake system do not recommend tuning the vehicles to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the Stillen High Flow intake system, as exempt by the ARB, which adversely affect the performance of the vehicles‘ pollution control system, shall invalidate this Executive Order. Marketing of the Stillen High Flow intake system usihg identification other than that shown in this Executive Order or for an application other than that listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. Exemption of the Stillen High Flow intake system shall not be construed as exemption to sell, offer for sale, or advertise any component of the system as an individual device. This Executive Order shall not apply to any Stillen High Flow intake system advertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an ultimate purchaser. This Executive Order does not constitute any opinion as to the effect the use of the Stillen High Flow intake system may have on any warranty either expressed or implied by the vehicle manufacturer. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. In addition to the foregoing, the ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of California Code of Regulations, Title 13, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF STEVE MILLEN SPORTPARTS, INC.‘S STILLEN HIGH FLOW INTAKE SYSTEM. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten—day written notice of

STEVE MILLEN SPORTPARTS, INC. EXECUTIVE ORDER D—436—8 STILLEN HIGH FLOW INTAKE SYSTEM (Page 3 of 3) PART NO. 402908 intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the Executive Order may not be revoked until a determination after the hearing that grounds for revocation exist. Executed at El Monte, California, this day of September 2000 fimerfield, C Mobile Source Operatlons Division


Document Created: 2005-09-01 12:43:20
Document Modified: 2005-09-01 12:43:20

Previous E.O. D-436-7 | Previous E.O. D-435 | Next E.O. D-436-9 | Next E.O. D-437