Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on June 30, 2015.
As of Monday, December 10th, 2018 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
See PDFSee PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-161-102
  • Executive Order 161-102 / D161-102
  • ARB # D-161-102
  • Executive Order No: D-161-102
  • C.A.R.B. No. D-161-102
  • Resolution D-161-102
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]s.com

Download: Executive Order D-161-102 PDF

D-161-102 Document:



                                    State of California
                                AIR RESOURCES BOARD

                             EXECUTIVE ORDER D—161—102

                       Relating to Exemptions Under Section 27156
                                  of the California Vehicle Code

                                 Gale Banks Engineering
                                     Ram—Air Intake

Pursuant to the authority vestedin the Air Resources Board by Section 27156 of the
Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and
Section 39516 of the Health and Safety Code and Executive Order G—14—012;

IT IS ORDERED AND RESOLVED: That the installation of the Ram—Air Intake, marketed
by Gale Banks Engineering of 546 Duggan Avenue, Azusa, California 91702, has been
found not to reduce the effectiveness of the applicable vehicle pollution control systems
and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for
the following diesel pickup/truck/SUV applications.

  PN         Model Year Application                                E




                                                                       \NOGGGaacebco~~ww hN ~G o ow oo oz
                                                                       QOOQQQQQ@@@NN@@@@@@@@@@z
                                                                                                  rrrrhrrrrrrrrrrrrrfirrrrg
42132—D       2001—2004     GM Pickups w/ Duramax LB7
42135—D       2004—2005      GM Pickups w/ Duramax LLY
42142—D       2006—2007     GM Pickups w/ Duramax LLY/LBZ
42145—D       2003—2007     Dodge Ram w/ Cummins
42155         2003—2007     Ford Pickups/SUVs w/ Power Stroke
42155—D       2003—2007     Ford Pickups/SUVs w/ Power Stroke
42172—D       2007—2010     GM Pickups w/ Duramax LMM
42175—D       2007—2009     Dodge Ram w/ Cummins
42180—D      2010—2012       Dodge Ram w/ Cummins
42185—D      2008—2010      Ford Pickups w/ Power Stroke
42210        1999—2003      Ford Pickups/SUVs w/ Power Stroke
42210—D      1999—2003       Ford Pickups/SUVs w/ Power Stroke
42215         2011—2015     Ford Pickups w/ Power Stroke
42215—D       2011—2015      FordPickups w/ Power Stroke
42220—D       2011—2012     GM Pickups w/ Duramax LML
42225—D       1994—2002      Dodge Ram w/ Cummins
42230—D       2013—2014     GM Pickups w/ Duramax LML
42248           2015        GM Pickups w/ Duramax LML
42248—D         2015        GM Pickups w/ Duramax LML
42250           2015        GM Pickups w/ Duramax LML
42250—D         2015        GM Pickups w/ Duramax LML
42255         2013—2015      Dodge Ram w/ Cummins
42255—D       2013—2015      Dodge Ram w/ Cummins

The Banks Ram—Air Intake includes the following main components: reusable air filter, new
air filter enclosure, super—scoop (optional), intake system tubing, and assorted brackets
and hardware. Installation of the Air Intake System requires the removal of the stock
air filter housing and all intake air tubing. If the stock air filter housing contains the
vehicle‘s tune—up & emissions control decal, a replacement decal must be placed in
a similar location.

This Executive Order is valid prbvided the installation instructions for the Ram—Air Intake
will not recommend tuning the vehicle to specifications different from those of the vehicle
manufacturer.


Changes made to the design or operating conditions of the Ram—Air Intake, as exempt by
the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution
control system shall invalidate this Executive Order.

Marketing of the Ram—Air Intake using any identification other than that shown in this
Executive Order or marketing of the Ram—Air Intake for an application other than those
listed in this Executive Order shall be prohibited unless prior approval is obtained from the
Air Resources Board.

This Executive Order shall not apply to any Ram—Air Intake advertised, offered for sale,
sold with, or installed on a new motor vehicle prior to or concurrent with transfer to an
ultimate purchaser.

This Executive Order does not constitute any opinion as to the effect the use of the
Ram—Air Intake may have on any warranty either expressed or implied by the vehicle
manufacturer.

This Executive Order is granted based on prior data submitted in support of Executive
Orders D—161—80, D—161—81, and D—161—100. The increase in vehicle coverage does not
present changes that would cause an adverse effect on emissions or impair proper
function of the OBD II system. The emissions impact for the newly—included vehicles
should be similar to those vehicles covered under the existing Executive Orders.

The Air Resources Board reserves the right in the future to review this Executive Order
and the exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Regulations, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF GALE BANKS
ENGINEERING‘S RAM—AIR INTAKE.

No claim of any kind, such as "Approved by the Air Resources Board", may be made with
respect to the action taken herein in any advertising or other oral or written
communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The
order may be revoked only after a ten—day written notice of intention to revoke the order, in
which period the holder of the order may request in writing a hearing to contest the
proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of
the request and the order may not be revoked until a determination is made after the
hearing that grounds for revocation exist.

Executed at El Monte, California, this               day of June 2015.


                       ~

        @&Annefie Hebert, Chief
              Emissions Compliance, Automotive Regulations and Science Division




            GALE BANKS ENGINEERING — RAM—AIR INTAKE — D—161—102



Document Created: 2015-08-17 17:00:55
Document Modified: 2015-08-17 17:00:55

Previous E.O. D-161-101 | Previous E.O. D-160 | Next E.O. D-161-103 | Next E.O. D-162