Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on June 24, 2011.
As of Tuesday, September 17th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
259742003-2004 Ford 6.0L Power Stroke pickup truckInstallation of the Techni-Cooler does not require any disconnection, relocation or modification of the original temperature sensors. The engineÔÇÖs stock maximum intake manifold (boost) pressure or fuel calibration must be retained.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-161-90
  • Executive Order 161-90 / D161-90
  • ARB # D-161-90
  • Executive Order No: D-161-90
  • C.A.R.B. No. D-161-90
  • Resolution D-161-90
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-161-90 PDF

D-161-90 Document:


CARB_D-161-90

                                          State of California
                                     AIR RESOURCES BOARD

                                   EXECUTIVE ORDER D—161—90

                            Relating to Exemptions Under Section 27156
                                       of the California Vehicle Code

                                       Gale Banks Engineering
                                            Techni—Cooler

 Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle
 Code; and

 Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of
 the Health and Safety Code and Executive Order G—02—003;

 IT IS ORDERED AND RESOLVED: That the installation of the Techni—Cooler, manufactured
and marketed by Gale Banks Engineering, 546 Duggan Avenue, Azusa, ‘California 91702,
 has been found not to reduce the effectiveness of the applicable vehicle pollution control
 systems and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code
 for the following dieset vehicle applications equipped with exhaust gas recirculation.

 Part Number                    Agglicati-on

 25974                          2003—2004 Ford 6.0L Power Stroke pickup truck

 25975                          2005—2007 Ford 6.0L Power Stroke pickup truck

 25977                  .       2002—2004 GM 6.6L Duramax pickup truck

 25978                          2004-2005 GM 6.6L Duramax pickup truck

 25982                          2006—2011 GM 6.6L Duramax pickup truck

 25983                      _   2007—2011 Dodge 6.7L Cummins pickup truck

 25984                          2008—2010 Ford 6.4L Power Stroke pickup truck

  Installation of the Techni—Cooler does not require any disconnection, relocation or
  modification of the original temperature sensors. The engine‘s stock maximum intake
_ manifold (boost) pressure or fuel calibration must be retained.

 This exemption is issued based on engineering evaluation, OBD II testing and technical
 information supplied by Gale Banks Engineering which showed that installation of the
 Techni—Cooler has no adverse effect on emissions of the applicable vehicles.

 This Executive Order is valid provided that the installation instructions for the
 Techni—Cooler will not recommend tuning the vehicle to specifications different from those
 submitted by the device manufacturer.


Changes made to the design or operating conditions of the Techni—Cooler, as exempt by the
Air Resources Board, which adversely affect the performance of the vehicle‘s pollution
control system shall invalidate this Executive Order

 This Executive Order shall not apply to any Techni—Cooler advertised, offered for sale, sold
 with, or installed on a new motor vehicle prior to or concurrent with transfer to an ultlmate
 purchaser.

 Marketing of the Techni—Cooler using any identification other than that shown in this
 Executive Order or marketing of the Techni—Cooler for an application other than those
 listed in this Executive Order shall be prohibited unless prior approval is obtained from
 the Air Resources Board.

 This Executive Order does not constitute ény opinion as to the effect the use of the
 Techni—Cooler may have on any warranty either expressed or implied by the vehicle
 manufacturer.

. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
  ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
  AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING    |
  ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE
  TECHNI—COOLER.

 No claim of any kind, such as "Approved by the Air Resources Board", may be made
 with respect to the action taken herein in any advertising or other oral or written '
 communication.                                                           —

 Violation of any of the above conditions shall be grounds for revocation of this order.
 The order may be revoked only after a ten—day written notice of intention to revoke the
 order, in which period the holder of the order may request in writing a hearing to contest
 the proposed revocation. If a hearing is requested, it shall be held. within ten days of
 receipt of the request and the order may not be revoked until a determination is made
~ after the hearing that grounds for revocation exist.                         ©\

 Executed at El Monte, California, this     0'27#:       day of June 2011.




                                  ;‘fi‘/‘\’
                                      ;'nnette Hebert, Chief
                                       Mobile Source Operations Division




              GALE BANKS ENGINEERING — TECHNI—COOLER — D—161—90



Document Created: 2011-06-27 17:25:49
Document Modified: 2011-06-27 17:25:49

Previous E.O. D-161-89 | Previous E.O. D-160 | Next E.O. D-161-91 | Next E.O. D-162