Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on May 17, 2004.
As of Thursday, November 14th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
D763-33021995 BMW M3 3.0L

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-176-25
  • Executive Order 176-25 / D176-25
  • ARB # D-176-25
  • Executive Order No: D-176-25
  • C.A.R.B. No. D-176-25
  • Resolution D-176-25
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-176-25 PDF

D-176-25 Document:


CARB_D-176-25

                                       State of California
                                   AIR RESOURCES BOARD


                              EXECUTIVE ORDER D—176—25
                       Relating to Exemptions Under Section 27156
                                      Of the Vehicle Code

                                    Dinan Engineering, Inc.
                                    High Flow Air Flow Meter


Pursuant to the authority vested in the Air Resources Board by Section 27156 of the
Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and Sectlon 39516
of the Health and Safety Code and Executive Order G—02—003;

IT IS ORDERED AND RESOLVED; That the installation of the High Flow Air Flow
Meter, manufactured and marketed by Dinan Engineering, Inc., 865 Jarvis Drive, Morgan
Hill, CA 95037, has been found not to reduce the effectiveness of the applicable vehicle
pollution control system and, therefore, is exempt from the prohibitions of Section 27156
of the Vehicle Code for installation on 1995 through 2003 model year BMW vehicles as
described in the Exhibit A. The High Flow Air Flow Meter consists of a higher capacity
air flow meter housing designed to use the vehicle‘s original sensing element and permit
greater airflow into the engine.

This Executive Order is valid provided that the installation instructions for the High Flow
Air Flow Meter will not recommend tuning the vehicle to specifications different from
those of the vehicle manufacturer.

This Executive Order shall not apply to any High Flow Air Flow Meter advertised, offered
for sale, sold with, or installed on a motor vehicle prior to or concurrent with the transfer
to an ultimate purchaser.

Changes made to the design or operating conditions of the High Flow Air Flow Meter, as
exempt by the Air Resources Board, which adversely affect the performance of the
vehicle‘s pollution control system shall invalidate this Executive Order.

Marketing of the High Flow Air Flow Meter using any identification other than that shown
in this Executive Order or marketing of the High Flow Air Flow Meter for an application
other than those listed in this Executive Order shall be prohibited unless prior approval is
obtained from the Air Resources Board. Exemption of the system shall not be construed


as exemption to sell, offer for sale, or advertise any component of the kit as an individual
device.

This Executive Order does not constitute any opinion as to the effect that the use of the
High Flow Air Flow Meter may have on any warranty either expressed or implied by the
vehicle manufacturer.

This Executive Order is granted based on prior evaluation which determined that Dinan
Engineering, Inc.‘s High Flow Air Flow Meter does not cause an adverse effect on
emissions of selected passenger cars (D—176—18), nor does it affect the vehicles‘ ability
to perform On—Board Diagnostic II (OBD I1) system monitoring. The same effect on
emissions and OBD II system monitoring is expected on the vehicles listed in this
Executive Order.

The ARB reserves the right in the future to review this Executive Order and the
exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Regulations, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF DINAN
ENGINEERING‘S HIGH FLOW AIR FLOW METER.

No claim of any kind, such as "Approved by the Air Resources Board", may be made
with respect to the action taken herein in any advertising of other oral or written
communication.

Violation of any of the above conditions shall be grounds for revocation of this order.
The order may be revoked only after a ten—day written notice of intention to revoke the
order, in which period the holder of the order may request in writing a hearing to contest
the proposed revocation. If a hearing is requested, it shall be held within ten days of
receipt of the request and the order may not be revoked until a determination is made,
after the hearing, that grounds for revocation exist.

Executed at El.Monte, California, this /7fl'J day of May 2004.




                                   AllerfLyons, Chief
                                   Mobile Source Operations Division




          DINAN ENGINEERING, INC.— HIGH FLOW AIR FLOW METER — D—176—25


                               Exhibit A


   Model         Model Years      Engine Size   Part Number

   M3                1995              3.0L     D763—3302
                                                D763—3300
                                                D763—3312
                                                D763—3310

   M3              1996—1999           3.2L     D763—3332
                                                D763—3334
                                                D763—3013
                                                D763—3014

   M3             2001—2003            82L      D763—1600

   M Roadster      1998—2000           3.2L     D763—3333
                                                D763—3335

   M Coupe         1998—2000           3.2L     D763—3333
                                                D763—3335

   M Roadster      2001—2002           3.2L     D763—1650

   M Coupe         2001—2002           S.2L     D763—1650

   5401      _     1996—1998           4. AL    D763—1440
                   1999—2003           4.AL     D763—1442

   MS              2000—2003           4.9L     D763—1500

   740i, 740iL     1996—1998           4.AL     D763—1440
                   1999—2002           4.AL     D763—1442

   X5 4.41         2000—2002           4.AL     D763—1444

   X5 4.61         2002—2003           4.6L     D763—1444

   Z8              2000—2002           4.9L     D763—1550




DINAN ENGINEERING, INC.— HIGH FLOW AIR FLOW METER — D—176—25



Document Created: 2017-09-06 10:51:45
Document Modified: 2017-09-06 10:51:45

Previous E.O. D-176-24 | Previous E.O. D-175 | Next E.O. D-176-26 | Next E.O. D-177