Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on October 15, 2014.
As of Friday, September 13th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part Number
See PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-176-40
  • Executive Order 176-40 / D176-40
  • ARB # D-176-40
  • Executive Order No: D-176-40
  • C.A.R.B. No. D-176-40
  • Resolution D-176-40
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-176-40 PDF

D-176-40 Document:


CARB_D-176-40

                                    State of California
                                AIR RESOURCES BOARD

                              EXECUTIVE ORDER D—176—40

                       Relating to Exemptions Under Section 27156
                                  of the California Vehicle Code

                                  Dinan Engineering, Inc.
                         Carbon Intake Tube, Part No D760—0024


Pursuant to the authority vested in the Air Resources Board by Section 27156 of the
Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516
of the Health and Safety Code and Executive Order G—14—012;

IT IS ORDERED AND RESOLVED: That the installation of the Carbon Intake Tube,
manufactured and marketed by Dinan Engineering, Inc., 865 Jarvis Drive,
Morgan Hill, California 95037, has been found not to reduce the effectiveness of the
applicable vehicle pollution control systems and, therefore, is exempt from the
prohibitions of Section 27156 of the Vehicle Code for 2008 to 2013 model year BMW M3
vehicles with a 4.0L engine.

The Carbon Intake Tube is a direct replacement carbon fiber intake tube that is
attached between the stock airbox and the intake plenum. The stock intake tube and
the Carbon Intake Tube share the same interior volume, length, and port size. Retains
all stock connections, requires no modifications for installation. The Carbon Intake
Tube has no mechanical or electrical user adjustments. No changes are made to
any component of the stock engine for installation, including engine calibration.

This Executive Order is valid provided that the installation instructions for the Carbon
Intake Tube will not recommend tuning the vehicle to specifications different from those of
the vehicle manufacturer.

Changes made to the design or operating conditions of the Carbon Intake Tube as
exempt by the Air Resources Board, which adversely affect the performance of the
vehicle‘s pollution control system shall invalidate this Executive Order.

Marketing of the Carbon Intake Tube using any identification other than that shown in
this Executive Order or marketing of the Carbon Intake Tube for an application other
than those listed in this Executive Order shall be prohibited unless prior approval is
obtained from the Air Resources Board.

This Executive Order does not constitute any opinion as to the effect the use of the
Carbon Intake Tube may have on any warranty either expressed or implied by the
vehicle manufacturer.


                                             yM


This Executive Order is granted based on an engineering evaluation and information
supplied by Dinan Engineering, Inc. on the Carbon Intake Tube. Comparisons made
between the stock and modified part demonstrated similarity in port size, interior
volume, and design.

The Air Resources Board reserves the right in the future to review this Executive Order
and the exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Regulations, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE CARBON
INTAKE TUBE.

No claim of any kind, such as "Approved by the Air Resources Board", may be made
with respect to the action taken herein in any advertising or other oral or written
communication.

Violation of any of the above conditions shall be grounds for revocation of this order.
The order may be revoked only after a ten—day written notice of intention to revoke the
order, in which period the holder of the order may request in writing a hearing to contest
the proposed revocation. If a hearing is requested, it shall be held within ten days of
receipt of the request and the order may not be revoked until a determination is made
after the hearing that grounds for revocation exist.

Executed at El Monte, California, this 15 71/          day of October 2014.




       376‘\2 Annette Hebert, Chief
              Emissions Compliance, Automotive Regulations and Science Division




          DINAN ENGINEERING, INC. — CARBON INTAKE TUBE — D—176—40



Document Created: 2015-02-16 17:06:11
Document Modified: 2015-02-16 17:06:11

Previous E.O. D-176-39 | Previous E.O. D-175 | Next E.O. D-176-41 | Next E.O. D-177