Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 31, 1997.
As of Thursday, November 28th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsRemarks
38031985-1988 GM Camaro/ Firebird/ Corvette 5.0L, 5.7L52mm

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-215-32
  • Executive Order 215-32 / D215-32
  • ARB # D-215-32
  • Executive Order No: D-215-32
  • C.A.R.B. No. D-215-32
  • Resolution D-215-32
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-215-32 PDF

D-215-32 Document:


CARB_D-215-32

                                                                                (Page 1 of 2)

                                           State ofCalifornia
                                       ATR RESOURCES BOARD

                                    EXECUTIVE ORDER D—215—32
                              Relating to Exemptions Under Section 27156
                                           of the Vehicle Code


                                     EDELBROCK CORPORATION
                                    52mm and 58mm Throttle Bodies


Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and
Safety Code and Executive Order G—45—9;                                                                      R

IT IS ORDERED AND RESOLVED: That the installation of the 52mm and 58mm Throttle Bodies,
manufactured by BBK Performance, Inc. and marketed by the Edelbrock Corporation, 2700 California St.,
Torrance, California 90509—2936 has been found not to reduce the effectiveness of the applicable vehicle
pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle
Code for the following vehicle applications:

Part No.           Vehicle Application          Engine Disp.           Size               Model—Year
3803             Camaro/Firebird/Corvette         5.0/5.T7L            52mm                1985—88
3804             Camaro/Firebird/Corvette         5.0/5.7L             58mm                1985—88
3805                 Camaro/Firebird                5.0L               52mm                1989—92
3805                    Corvette                    5.0L               52mm                1989—91
3806                 Camaro/Firebird              5.0/5.7L             5§mm                1989—92
3806                     Corvette                 5.0/5.TL             58mm                1989—91
3807             Camaro/Firebird/Impala SS           5.TL              52mm                1993—95
3807                     Corvette                    5.TL              52mm                1992—95
3808             Camaro/Firebird/Impala SS           5.TL              58mm                1993—95
3808                     Corvette                   5.TL               58mm                1992—95

This Executive Order is valid provided that the installation instructions for the 52mm and 58mm Throttle
Bodies will not recommend tuning the vehicle to specifications different from those of the vehicle
manufacturer.       C

Changes made to the design or operating conditions of the 5Z2mm and 58mm Throttle Bodies, as exempt by
the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution control system
shall invalidate this Executive Order.

Marketing ofthe 52mm and 58mm Throttle Bodies using any identification other than that shown in this
Executive Order or marketing of the 52mm and 58mm Throttle Bodies for an application other than those
listed in this Executive Order shall be prohibited unless prior approvalis obtained from the Air Resources
Board. Exemption of the 52mm and 5§mm Throttle Bodies shall not be construed as exemption to sell,
offer for sale, or advertise any component ofthe kit as an individual device.

This Executive Order does not constitute any opinion as to the effect the use of the 52mm and 58mm
Throttle Bodies may have on any warranty either expressed or implied by the vehicle manufacturer.


EDELBROCK —                 .                       '                    Executive Order D—215—32
The 52mm and 58mm Throttle Bodies                                    —   (Page2of2)




THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY
ALLEGED BENEFITS OF THE EDELBROCK CORPORATION®S 52MM AND 58MM THROTTLE
BODIES.

No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the
action taken herein in any advertising or other oral or written communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The order may be
revoked only after a ten—day written notice of intention to revoke the order, in which period the holder of
the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it
shall be held within ten days of receipt of the request and the order may not be revoked until a
determination after hearing that grounds for revocation exist.

Executive Order D—215—25, dated April 3, 1997, is superseded and of no further force and effect.

Executed at El Monte, California, this 3[35 day of December 1997.




                                   R. B. Summerfield, Chief
                                   Mobile Source Operations Division



Document Created: 2005-09-01 12:40:36
Document Modified: 2005-09-01 12:40:36

Previous E.O. D-215-31 | Previous E.O. D-214 | Next E.O. D-215-33 | Next E.O. D-216