Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on February 17, 1994.
As of Sunday, September 15th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
16291988-1994 7.5L trucks

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-216-11
  • Executive Order 216-11 / D216-11
  • ARB # D-216-11
  • Executive Order No: D-216-11
  • C.A.R.B. No. D-216-11
  • Resolution D-216-11
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-216-11 PDF

D-216-11 Document:

CARB_D-216-11

(Page 1 of 2) State of California ALIR RESOURCES BOARD EXECUTIVE ORDER D—216—11 Relating to Exemptions Under Section 27156 of the Vehicle Code AUEOMOTIVE ENGINEERED PRODUCTS, INC. Shorty Headers Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—5; IT.IS ORDERED AND RESOLVED: That the installation of the Shorty Headers manufactured out of #14 gage steel by Automotive Engineered Products, Inc. of 7149 Mission Gorge Road, Suite D, San Diego, California 92120 has been found not to reduce the effectiveness of required motor vehicle pollution control devices and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the following Ford Motor Company vehicles: Part No. Vehicle Application 1621 . 1985 5.0L Mustangs 1620 & 1624 1986—94 5.0L Mustangs 1990—93 5.0L Thunderbirds 1627 & 1628 1985—94 5.0 or 5.8L trucks 1633 1990—94 4.0L Ford/Mazda trucks 1629 1988—94 7.5L trucks This Executive Order is valid provided that the Shorty Headers are manufactured from #14 gage tubing, and the installation instructions for the Shorty Headers will not recommend tuning the vehicle to specifications different from those submitted by the manufacturer. Changes made to the design or operating conditions of the device, as exempted by the ARB, that adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of this device using an identification other than that shown in this Executive Order or marketing of this device for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. This Executive Order does not constitute any opinion as to the effect the use of this device may have on any warranty either expressed or implied by the vehicle manufacturer. + THIS EXECUTIVE ORDER DOBS NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF AUTOMOTIVE ENGINEERED PRODUCTS, INC.‘S SHORTY HEADERS.

AUTOMOTIVE ENGINEERED PRODUCTS, INC. EXECUTIVE ORDER D—216—11 (Page 2 of 2) No claim of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any advertising —or other oral or written communication. Section 17500 of the Business and Professions Code makes untrue or misleading advertising unlawful, and Section 17534 makes violation punishable as a misdemeanor. Section 43644 of the Health and Safety Code provides as follows: "43644, (a) No person shall install, sell, offer for sale, or advertise, or, except in an application to the state board for certification of a device, represent, any device as a motor vehicle pollution control device for use on any used motor vehicle unless that device has been certified by the state board. No person shall sell, offer for sale, advertise, or represent any motor vehicle pollution control device as a certified device which, in fact, is not a certified device. Any violation of this subdivision is a misdemeanor." Any apparent violation of the conditions of this Executive Order may result in its rescission or submission to the Attorney General of California for such action as he deems advisable. . Executive Order D—216—10 is hereby superseded and is no longer of any force or effect. The Bureau of Automotive Repair will be notified by copy of this order. Executed at El Monte, California, this / 2 y 0 ebruary 1994. Mobile Source Division


Document Created: 2005-09-01 12:41:23
Document Modified: 2005-09-01 12:41:23

Previous E.O. D-216-10 | Previous E.O. D-215 | Next E.O. D-216-12 | Next E.O. D-217