Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on April 6, 1995.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
2341, 2343 2321, 23311995 and older Ford vehicles with a 289, 302, or 351 CID V-8 gasoline engine.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-216-18
  • Executive Order 216-18 / D216-18
  • ARB # D-216-18
  • Executive Order No: D-216-18
  • C.A.R.B. No. D-216-18
  • Resolution D-216-18
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-216-18 PDF

D-216-18 Document:

CARB_D-216-18

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—216—18 Relating to Exemptions Under_Section 27156 of the Vehicle Code AUTOMOTIVE ENGINEERED PRODUCTS, INC. 1.7 ROLLER ROCKER Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—5; IT IS ORDERED AND RESOLVED: That the installation of the 1.7 Roller Rocker, part nos. 2341, 2343, 2321, and 2331, manufactured by Automotive Engineered Products, Inc. of 7149 Mission Gorge Rd., Suite D, San Diego, California 92120 has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for 1995 and older Ford Motor Company vehicles with a 289, 302, or 351 CID V—8 gasoline engine. This Executive Order is valid provided that installation instructions for these rocker arms will not recommend tuning the vehicle to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the rocker arms, as exempt by the Air Resources Board, which—adversely affect the performance of a vehicle‘s poliution control system shall invalidate this Executive Order. Marketing of these rocker arms using any identification other than that shown in this Executive Order or marketing of the rocker arms for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. This Executive Order does not constitute any opinion as to the effect the use of the rocker arms may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF AUTOMOTIVE ENGINEERED PRODUCTS, INC.‘S 1.7 ROLLER ROCKER, PART NOS. 2341, 2343, 2321, and 2331. No claim of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any advertising or other oral or wrltten communication.

AUTOMOTIVE ENGINEERED PRODUCTS, INC. EXECUTIVE ORDER D—216—18 (Page 2 of 2) Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after ten day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. Executed at El Monte, California, this Mobile Source Division


Document Created: 2005-09-01 12:44:01
Document Modified: 2005-09-01 12:44:01

Previous E.O. D-216-17 | Previous E.O. D-215 | Next E.O. D-216-19 | Next E.O. D-217