Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on April 14, 2017.
As of Friday, December 6th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part Number
see pdf

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-245-20
  • Executive Order 245-20 / D245-20
  • ARB # D-245-20
  • Executive Order No: D-245-20
  • C.A.R.B. No. D-245-20
  • Resolution D-245-20
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-245-20 PDF

D-245-20 Document:


CARB_D-245-20

                                    State of California
                                AIR RESOURCES BOARD

                              EXECUTIVE ORDER D—245—20

                                Relating to Exemptions under
                             Section 27156 of the Vehicle Code

                                     BBK Performance
                                      Shorty Headers

Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the
Vehicle Code (VC); and

Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the
Health and Safety Code and Executive Order G—14—012;

IT IS ORDERED AND RESOLVED: That installation of the Shorty Headers, manufactured
by BBK Performance, 27440 Bostik Court, Temecula, California 92590, has been found not
to reduce the effectiveness of the applicable vehicle pollution control systems, and
therefore, the Shorty Headers are exempt from the prohibitions in VC Section 27156 for
installation on the following General Motors vehicle applications listed in Exhibit A.

The headers are a shorty style header design, manufactured out of 14 gage mild steel or 16
gage stainless steel. The oxygen sensor is retained in the stock location at a collector. The
headers may include a connecting Y—pipe that is also manufactured out of 14 gage mild
steel or 16 gage stainless steel.

This Executive Order is valid provided that the installation instructions for the Shorty
Headers will not recommend tuning the vehicle to specifications different from those of the
vehicle manufacturer.

Changes made to the design or operating conditions of the Shorty Headers, as exempt by
the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution
control system shall invalidate this Executive Order.

The Air Resources Board reserves the right in the future to review this Executive Order
and the exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Regulations, Section 2222, et seq.

This exemption is issued based on prior data submitted from BBK Performance in support
of other BBK Performance‘s Executive Orders.

The Air Resources Board reserves the right in the future to review this Executive Order
and the exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Regulations, Section 2222, et seq.


THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE
SHORTY HEADERS.

Marketing of the Shorty Headers using any identification other than that shown in this
Executive Order or marketing of the Shorty Headers for an application other than those
listed in this Executive Order shall be prohibited unless prior approval is obtained from the
Air Resources Board.

No claim of any kind, such as "Approved by the Air Resources Board", may be made with
respect to the action taken herein in any advertising or other oral or written
communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The
order may be revoked only after a ten—day written notice of intention to revoke the order,
in which period the holder of the order may request in writing a hearing to contest the
proposed revocation. If a hearing is requested, it shall be held within ten days of receipt
of the request and the order may not be revoked until a determination is made after the


                           romin LA                             dwse
hearing that grounds for revocation exist.

Executed at El Monte, California, this               day of April 2017.


                  /n
                 Annette Hebert, Chief
                 Emissions Compliance, Automotive Regulations and Science Division




                 BBK PERFORMANCE—SHORTY HEADERS—D—245—20


                                         Exhibit A

Part #
1567     94—95 GM LT—1 SINGLE CAT 1—5/8" SHORTY TUNED LENGTH
         EXHAUST HEADERS (CHROME)

15670    94—95 GM LT—1 SINGLE CAT 1—5/8" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

1568     95—97 GM LT—1 DUAL CAT 1—578" SHORTY TUNED LENGTH
         EXHAUST HEADERS (CHROME)

15680    95—97 GM LT—1 DUAL CAT 1—5/8" SHORTY TUNED LENGTH
         EXHAUST HEADER KIT (SILVER CERAMIC COATED)

1595     93—96 CHEVY IMPALA SS 1—5/8" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

15950    93—96 CHEVY IMPALA SS 1—5/8" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

1596     93 GM F—BODY LT—1 1—578" SHORTY TUNED LENGTH
         EXHAUST HEADERS (CHROME)

15960    93 GM F—BODY LT—1 1—578" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

40000    97—99 CS CORVETTE 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

40010    2000 C5 CORVETTE 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

4002     98—99 LS—1 CAMARO/EIREBIRD 1—3/4" SHORTY TUNED
         LENGTH EXHAUST HEADERS (CHROME)

40020    98—99 LS—1 CAMARO/FIREBIRD 1—3/4" SHORTY TUNED
         LENGTH EXHAUST HEADERS (SILVER CERAMIC COATED)

4003     01—02 LS—1 CAMARO/FIREBIRD 1—3/4" SHORTY TUNED
         LENGTH EXHAUST HEADERS (CHROME)

40030    01—02 LS—1 CAMARO/FIREBIRD 1—3/4" SHORTY TUNED
         LENGTH EXHAUST HEADERS (SILVER CERAMIC COATED)

40040    01—04 C5 CORVETTE 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

4005     99—14 GM TRUCK/SUV 4.8/5.31. 1—3/4" SHORTY TUNED
         LENGTH EXHAUST HEADERS (CHROME)

40050    99—14 GM TRUCK/SUV 4.8/5.3L 1—3/4" SHORTY TUNED
         LENGTH EXHAUST HEADERS (SILVER CERAMIC COATED)

4006     99—14 GM TRUCK/SUV 6.0/6.2L 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (CHROME)

40060    99—14 GM TRUCK/SUV 6.0/6.2L 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (SILVER CERAMIC COATED)

4007     96—99 GM TRUCK/SUV 5.0/5.7L 1—5/8" SHORTY TUNED
         LENGTH EXHAUST HEADERS (CHROME)

40070    96—99 GM TRUCK/SUV 5.0/5.7L 1—5/8" SHORTY TUNED
         LENGTH EXHAUST HEADERS (SILVER CERAMIC COATED)

4020     2010—15 CAMARO LS3 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (CHROME)

40200    2010—15 CAMARO LS3 1—3/4" SHORTY TUNED LENGTH
         EXHAUST HEADERS (CERAMIC)

40205    2010—15 CAMARO LS3 1—3/4" SHORTY TUNED LENGTH
         HEADERS (304 STAINLESS)

                    BBK PERFORMANCE—SHORTY HEADERS—D—245—20





Document Created: 2017-07-18 08:40:50
Document Modified: 2017-07-18 08:40:50

Previous E.O. D-245-19 | Previous E.O. D-244 | Next E.O. D-245-21 | Next E.O. D-246