Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 31, 1997.
As of Monday, October 21st, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
15401993-1995 GM Camaro/ Firebird/ Impala SS 5.7L 1992-1995 GM Corvette 5.7L

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-245-9
  • Executive Order 245-9 / D245-9
  • ARB # D-245-9
  • Executive Order No: D-245-9
  • C.A.R.B. No. D-245-9
  • Resolution D-245-9
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-245-9 PDF

D-245-9 Document:


CARB_D-245-9

                                                                                (Page 1 of 2)

                                            State of California
                                       AIR RESOURCES BOARD


                                     EXECUTIVE ORDER D—245—9
                              Relating to Exemptions Under Section 27156
                                           of the Vehicle Code


                                      BBK PERFORMANCE, INC.
                                   52mm and 58mm Throttle Bodies


Pursuant to the authofity vested in the Air Resources Board by Section 27156 of the Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and
Safety Code and Executive Order G—45—9;

IT IS ORDERED AND RESOLVED: That the installation of the 52mm and $$mm Throttle Bodies,
manufactured and marketed by BBK Performance, Inc. 1611 Railroad Street, Corona, California 91720
has been found not to reduce the effectiveness of the applicable vehicle pollution control system and,
therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the following vehicle
applications:

Part No.          Vehicle Application           Engine Disp.           Size               Model—Year
1534            Camaro/Firebird/Corvette          5.0/5.TL             52mm               1985—88
1536            Camaro/Firebird/Corvette          5.0/5.7L             58mm               1985—88
1537                Camaro/Firebird                 5.0L               52mm               1989—92
1537                   Corvette                     5.0L               52mm               1989—91
1539                Camaro/Firebird               5.0/5.7L             58$mm              1989—92
1539                   Corvette                   5.0/5.7L             58mm               1989—91
1540            Camaro/Firebird/Impala SS            5.TL              S2mm               1993—95
1540                    Corvette                     5.TL              52mm               1992—95
1542            Camaro/Firebird/Impala SS            5.TL              5gmm               1993—95
1542                    Corvette                     5TL               58mm               1992—95

This Executive Order is valid provided that the installation instructions for the S2mm and 58mm Throttle
Bodies will not recommend tuning the vehicle to specifications different from those of the vehicle
manufacturer.

Changes made to the design or operating conditions of the S2mm and S8mm Throttle Bodies, as exempt by °
the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution control system
shall invalidate this Executive Order.

Marketing of the 52mm and 58mm Throttle Bodies using any identification other than that shown in this
Executive Order or marketing of the S2mm and 58mm Throttle Bodies for an application other than those
listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources
Board. Exemption of the S2mm and 58mm Throttle Bodies shall not be construed as exemption to sell,
offer for sale, or advertise any component ofthe kit as an individual device.

This Executive Order does not constitute any opinion as to the effect the use of the 52mm and 58mm
Throttle Bodies may have on any warranty either expressed or implied by the vehicle manufacturer.


 BBK Performance, Inc.                                                   Executive Order D—245—9
 The S2mm and 58mm Throttle Bodies                                       (Page 2 of 2)




 THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
 APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
 ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY
 ALLEGED BENEFITS OF THE BBK PERFORMANCE, INC.‘S 52MM AND 58MM THROTTLE
 BODIES.

 No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the
 action taken herein in any advertising or other oral or written communication.

. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be
  revoked only after a ten—day written notice ofintention to revoke the order, in which period the holder of
  the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it
  shall be held within ten days of receipt ofthe request and the order may not be revoked until a
  determination after hearing that grounds for revocation exist.

 Executive Order D—245—7, dated April 3, 1997, is superseded and of no further force and effect.

 Executed at El Monte, California, this    __7/**~ day of December 1997.




                                 [R B. Surnmerfield, Chief
                                  Mobile Source Operations Division



Document Created: 2005-09-01 12:40:29
Document Modified: 2005-09-01 12:40:29

Previous E.O. D-245-8 | Previous E.O. D-244 | Next E.O. D-245-10 | Next E.O. D-246