Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on November 5, 2014.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part Number
See PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-265-41
  • Executive Order 265-41 / D265-41
  • ARB # D-265-41
  • Executive Order No: D-265-41
  • C.A.R.B. No. D-265-41
  • Resolution D-265-41
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-265-41 PDF

D-265-41 Document:


CARB_D-265-41

                                    State of California
                                AIR RESOURCES BOARD

                              EXECUTIVE ORDER D—265—41

                               Relating to Exemptions under
                            Section 27156 of the Vehicle Code

                                       Chrysler LLC
                                    Mopar Performance
                                  Shaker Hood Scoop Kit

Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the
Vehicle Code (VC); and

Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the
Health and Safety Code and Executive Order G—14—012;

IT IS ORDERED AND RESOLVED: That installation of the Shaker Hood Scoop Kit,
manufactured by Chrysler LLC — Mopar Performance, 1000 Chrysler Drive, Auburn Hills,
Michigan 48326, has been found not to reduce the effectiveness of the applicable vehicle
pollution control systems, and therefore, the Shaker Hood Scoop Kit is exempt from the
prohibitions in VC Section 27156 for installation on the following vehicles:

Kit Part Number     Vehicle Model—Year          Vehicle Model & Engine
82214110AB          2011 to 2014                Dodge Challenger 5.7L
82214479            2014 and 2015               Dodge Challenger 5.7L

The Shaker Hood Scoop Kit is designed to replace the standard Challenger hood with a
new hood and raised hood scoop for air induction. Kit includes new hood, air scoop, open
element air box with conical air filter, air inlet tube from scoop to air box, and various
connecting and mounting hardware.                                                          f

This Executive Order is valid provided that the installation instructions for the Shaker Hood
Scoop Kit will not recommend tuning the vehicle to specifications different from those of
Chrysler LLC — Mopar Performance.

Changes made to the design or operating conditions of the Shaker Hood Scoop Kit, as
exempt by the Air Resources Board, which adversely affect the performance of the
vehicle‘s pollution control system shall invalidate this Executive Order.

 The Air Resources Board reserves the right in the future to review this Executive Order
 and the exemption provided herein to assure that the exempted add—on or modified part
 continues to meet the standards and procedures of Title 13, California Code of
 Regulations, Section 2222, et seq.

 This Executive Order is granted based on prior submitted emission test data generated
 on a 2014 model year Dodge Challenger modified with the Shaker Hood Scoop Kit.
 Test results showed that emission levels, with the Shaker Hood Scoop Kit installed, met


                                             2.

the applicable emission standards when tested using the Cold—Start CVS—75 Federal
Test Procedure (FTP) test cycle and the Supplemental Federal Test Procedure
(SFTP USO6) test cycle. Examination of the OBD II system showed that the Shaker
Hood Scoop Kit did not affect OBD II system operation. Results from emissions testing
conducted at the Chrysler Technology Center, are shown below, in grams per mile, with
deterioration factors (df) applied.
                                            CVS—75 FTP
                                   NMOG       CO    NOx             HCHO
Standards, Useful Life*            0.070      2.1   0.04            0.011
Device Test w/df                   0.035      0.7   0.04            0.001

                                                  USO6
                                NMHC+NOx                 Cco
Standards 4k                      0.14                   8.0
Device                            0.11                   0.6

* USEPA Bin 4, Counted as LEV II ULEV, CVS—75 FTP emissions standards, useful
life.

The Air Resources Board reserves the right in the future to review this Executive Order
and the exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Regulations, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE
SHAKER HOOD SCOOP KIT.

Marketing of the Shaker Hood Scoop Kit using any identification other than that shown
in this Executive Order or marketing of the Shaker Hood Scoop Kit for an application
other than those listed in this Executive Order shall be prohibited unless prior approval
is obtained from the Air Resources Board.

No claim of any kind, such as "Approved by the Air Resources Board", may be made
with respect to the action taken herein in any advertising or other oral or written
communication.

This Executive Order shall not apply to any Shaker Hood Scoop Kit advertised, offered
for sale, sold with, or installed on a new motor vehicle prior to or concurrent with transfer
to an ultimate purchaser.



CHRYSLER LLC — MOPAR PERFORMANCE—SHAKER HOOD SCOOP KIT—D—265—41


Violation of any of the above conditions shall be grounds for revocation of this order.
The order may be revoked only after a ten—day written notice of intention to revoke the
order, in which period the holder of the order may request in writing a hearing to contest
the proposed revocation. If a hearing is requested, it shall be held within ten days of
receipt of the request and the order may not be revoked until a determination is made
after the hearing that grounds for revocation exist.

Executed at El Monte, California, this    5            day of November 2014.




           /.wl  Annette Hebert, Chief
                 Emissions Compliance, Automotive Regulations and Science Division




 CHRYSLER LLC — MOPAR PERFORMANCE—SHAKER HOOD SCOOP KIT—D—265—41





Document Created: 2015-02-16 16:23:44
Document Modified: 2015-02-16 16:23:44

Previous E.O. D-265-40 | Previous E.O. D-264 | Next E.O. D-265-42 | Next E.O. D-266