Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on July 1, 2014.
As of Tuesday, April 23rd, 2019 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
020-01-082731987-1997 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-130
  • Executive Order 288-130 / D288-130
  • ARB # D-288-130
  • Executive Order No: D-288-130
  • C.A.R.B. No. D-288-130
  • Resolution D-288-130
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-130 PDF

D-288-130 Document:


State of California AIR RESOURCES BOARD EXECUTIVE ORDER D-288-130 Relating to Exemptions under Section 27156 of the Vehicle Code Transfer Flow, Inc. Retrofit Fill neck Kits and Transfer Tube Kits Pursuant to the authority vested in the Air Resources Board (ARB) by Vehicle Code (VC) Section 27156; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G-14-012; IT IS ORDERED AND RESOLVED: That installation of the Retrofit Fillneck Kits and Transfer Tube Kits, manufactured by Transfer Flow, Inc. (TFI) of 1444 Fortress Street, Chico, California 95973 , has been found not to reduce effectiveness of the applicable vehicle pollution control systems as listed in Exhibit A, and therefore, the Retrofit Fillneck Kits and Transfer Tube Kits are exempt from the prohibitions in VC Section 27156. This Executive Order covers kits used with California-certified 2014 or older model-year small off-road engines rated at 19 kilowatts or less or large spark ignition engines rated at or below 50 horsepower. This Executive Order is based on an engineering evaluation of the impacts the Retrofit Fillneck Kits and Transfer Tube Kits have on the vehicles' evaporative emissions, On-Board Refueling Vapor Recovery emissions, and On-Board Diagnostic II Systems. This Executive Order is valid provided that installation instructions for the Retrofit Fillneck Kits and Transfer Tube Kits do not recommend tuning the vehicles or engines to specifications different from those of the vehicle or engine manufacturers. Changes made to the design or operating conditions of the Retrofit Fill neck Kits and Transfer Tube Kits, as exempt by ARB, which adversely affect the performance of the vehicle's or engine's pollution control system, shall invalidate this Executive Order. Marketing of the Retrofit Fill neck Kits and Transfer Tube Kits using identification other than that shown in this Executive Order or for an application other than that listed in this Executive Order shall be prohibited unless prior approval is obtained from ARB. Exemption of the Retrofit Fill neck Kits and Transfer Tube Kits shall not be construed as an exemption to sell, offer for.sale, or advertise any component of the Retrofit Fillneck Kits and Transfer Tube Kits as individual devices.

E/A This Executive Order shall not apply to any Retrofit Fillneck Kits and Transfer Tube Kits advertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an ultimate purchaser. This Executive Order does not constitute any opinion as to the effect the use of the Retrofit Fillneck Kits and Transfer Tube Kits may have on any warranty either expressed or implied by the vehicle or engine manufacturer. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. In addition to the foregoing, ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of California Code of Regulations, Title 13, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY ARB OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TFI‘S RETROFIT FILLNECK KITS AND TRANSFER TUBE KITS. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten—day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the Executive Order may not be revoked until a determination is made after a hearing that grounds for revocation exist. Executed at El Monte, California, this { day of July 2014. Annette Hebert, Chief Emissions Compliance, Automotive Regulations and Science Division TRANSFER FLOW, INC. RETROFIT FILLNECK KITS AND TRANSFER TUBE KITS — D—288—130

EXHffiiTA VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU or 5.4 L 1987-1997 020-01 -08273 Cab Chassis 6.2L 1987- 1997 020-01-08274 OEM rear tank/formed fillneck kit Conversions to 6.8 L 1987-1997 020-0 1-08291 OEM rear tank/formed fillneck kit Flatbeds or Utility Boxes 7.5 L 1987-1997 020-0 1-09619 OEM front tank/straight fillneck kit Gas 1987-1997 020-0 1-09617 OEM front tank/straight fillneck kit 1987-1997 020-0 1-09618 OEM rear tank/straight fillneck kit 1987-1997 020-0 1-09620 OEM rear tank/straight fill neck kit 1999-2009 020-01-10589 OEM tank with formed fillneck and formed transfer tube kit 1999-2009 020-0 1- 10590 OEM tank with formed fillneck and straight transfer tube kit 1999-2009 020-01-10591 OEM tank with straight fillneck and formed transfer tube kit 1999-2009 020-01-10592 OEM tank with straight fillneck and straight transfer tube kit 1999-2004 020-01-11679 OEM tank supply and return transfer tube kit for generator set 1999-2003 020-01-11967 OEM tank supply and return transfer tube kit for generator set 1999-2003 020-01-11975 OEM tank supply a nd return transfer tube kit for generator set 2005-2009 020-01-1 3145 OEM aft tank supply and return kit for generator set 2005-2009 020-01-1 3 146 OEM tank supply and return transfer tube kit for generator set 2005-2009 020-01-1 3 150 OEM tank supply a nd return transfer tube kit for generator set 2005-2009 020-0 1- 13 151 OEM tank supply and return transfer tube kit for generator set 1999-2004 020-01-13152 OEM aft tank supply and return kit for generator set 2005-2009 020-0 1-13 199 OEM front tank fill neck kit 2005-2009 020-01-13688 OEM front tank fillneck kit 2005-2009 020-01-1 3761 OEM front tank fillneck kit 2005-2009 020-01-1 3937 OEM midship tank ORVR fillneck kit 2005-2009 020-01-14045 OEM midship tank ORVR fillneck kit Ford 6.8 L 2004-2009 020-0 1-12667 OEM aft tank supply a nd return kit for generator set Stripped Chassis 6.2L 2006-2009 020-01-13381 OEM rear tank fillneck and transfer tube kit Gas 2005-2009 020-0A- 13578 OEM fuel supply, return and/or emission extension kit 2005-2009 020-0A-13 579 OEM fuel supply, return and/or e mission extension kit Page l of 5 D-288-130 6-23 -2014

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU 5.4 L 1987-1997 020-0 1-0693 7 OEM front tank/standard bed kit F250/35 0 HD 6.8 L 1987- 1997 020-0 1-06940 OEM front tank/dual bed kit 7.4 L 1987-1997 020-0 1-06941 Rear tank/standard bed kit 6.2L 1987-1 997 020-0 1-06942 Rear tank/dual bed kit Gas 1987-1997 020-0 1-08046 TFI front tank/standard bed kit 1987-1997 020-0 1-08045 TFI front tank/dual bed kit 1987-1997 020-0 1-08049 TFI rear tank/dual bed kit 1987-1997 020-0 1-08050 TFI rear tank/standard bed kit 1987-2009 020-01-11736 TFI cross the bed tank with camper shell fillneck kit 1987-2009 020-0 1- 11 738 TFI cross the bed tank with camper shell fillneck kit 2005-2009 020-0 1-13150 OEM front tank supply and return transfer tube kit for generator set 2005-2009 020-0 1-13 !5 1 OEM front tank supply and return transfer tube kit for generator set 2005-2009 020-0 l-1 390 1 OEM midship tank supply and return transfer tube kit for generator set 2005-2009 020-0 1-14290 OEM midship tank supply and return transfer tube kit for generator set Ford E-van 4.2 L 1992-2003 020-01-11764 OEM front tank supply and return transfer tube kit for generator set E I50, E250, E350, E450 4.6 L 1994-2003 020-0 1- I 1941 OEM aft tank E350/E450 supply and return transfer tube kit for generator set 5.4 L 1994-2003 020-01 -11951 OEM aft tank E350/E450 supply and return transfer tube kit for generator set 6.8 L 1999-2003 020-01-12204 OEM front tank supply and return transfer tube kit for generator set 7.5 L 1999-2003 020-0 1-12679 OEM front tank supply and return transfer tube kit for generator set 6.2L 1999-2003 020-01-13001 OEM front tank supply and return transfer tube kit for generator set Gas 2004-2009 020-0 1-13124 OEM front tank supply and return kit for generator set 2004-2009 020-01- I 3 126 OEM tank supply and return transfer tube kit for generator set 2004-2009 020-01-1 3 147 OEM aft tank supply and return kit for generator set 2004-2009 020-0 1- 13 153 OEM aft tank supply and return kit for generator set 1994-2002 020-0 1- 13 154 OEM aft tank supply and return kit for generator set 2006-2009 020-01 - 13476 OEM tank supply and return transfer tube kit for generator set 2006-2009 050-0 1- 13685 OEM aft tank fillneck 2009-2010 020-0 1-14528 OEM tank fillneck and canister relocation kit 2004-20 10 020-01-13954 04-10 FD EVAN IN-TANK FI T.T. KIT 20 11 -2014 020-01-15098 EVAN IN TANK PUMP GEN T.T. KIT 20 11 -20 14 020-01-15271 EVAN T.T. KIT FOR CARE/DIESEL GEN OR SM CARB ENGINE Page 2 of 5 D-288- 130 6-23-2014

EXHffiiTA VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION GM PUor 4.3 L 1990-1997 020-01-08276 OEM front and rear OEM tank with formed fillneck kit Cab Chassis 4.8 L 1990-1997 020-0 1-09625 OEM front and rear OEM tank with straight fillneck kit Conversions to 5.3 L 1992-2002 020-01-11611 OEM front tank supply and return transfer tube kit for generator Flatbeds or Utility Boxes 5.7 L 1992-2002 020-0 1-11710 OEM front tank supply and return transfer tube kit for generator C1500/2500/3500/3500 HD 6.0 L 1999-2003 020-01-11724 OEM front tank with straight fillneck and formed transfer tube kit KI500/2500/3500/3500 HD 7.4 L 1999-2002 020-01-11763 OEM front tank supply and return transfer tube kit for generator set 8.1 L 1992-2002 020-01-11969 OEM front tank supply and return transfer tube kit for generator set Gas 1999-2003 020-01-11971 OEM front tank supply tube kit for generator set 1999-2003 020-01-11976 OEM front tank supply and return transfer tube kit for generator set 2004-2005 020-0 1-12736 OEM front tank supply and return transfer tube kit for generator set 2004-2005 020-01-12602 OEM front tank fillneck kit 2004-2009 020-01-12604 OEM front tank fillneck kit 2004-2009 020-01-12639 OEM front tank fillneck kit 2004-2009 020-0 1-12684 OEM front tank fillneck kit 2004-2009 020-0 1-1 2965 OEM front tank fillneck kit 2005-2009 020-01-13066 OEM front tank supply and return transfer tube kit for generator set 2005-2009 020-01-13156 OEM front tank supply and return transfer tube kit for generator set 20 11-2014 020-01-15392 OEM front tank supply and return transfer tube kit for generator set GM C4500/C5500 8.1 L 2003 -2005 020-0 1-12206 Front tank supply and return transfer tube kit for generator set Cab Chassis Gas 2003-2005 020-01-12272 OEM·aft tank supply and return transfer tube kit for generator set 2006-2009 020-01-13435 OEM front tank supply and return transfer tube kit for generator set 2012-2014 020-01-15616 OEM front tank supply and return transfer tube kit for generator set Page 3 of 5 D-288-130 6-23-2014

EXHIDITA VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION GM G-van 4.3 L 1996-2002 020-01 -11 920 OEM front tank supply and return transfer tube kit for generator set G 1500, G2500, G3500 4.8 L 1996-2002 020-01 -11 969 OEM front tank supply and return transfer tube kit for generator set GM G Cutaway Chassis 5.3 L 2002 020-01-12225 OEM front tank fillneck kit 5.7 L 2002 020-0 1-12226 OEM front tank fillneck kit 6.0L 2004-2009 020-01 -123 11 OEM front tank supply and return transfer tube kit for generator set Gas 2003 020-01-12325 OEM front tank supply and return transfer tube kit fo r generator set 2003-2005 020-01-12390 OEM front tank supply and return transfer tube kit for generator set 2004-2014 020-01-12574 OEM front tank supply and return transfer tube kit for generator set 2003-2009 020-01 -1263 1 OEM front tank supply and return transfer tube kit for generator set 2003-2014 020-01 - 12742 OEM front tank supply and return transfer tube kit for generator set 2003-2005 020-01-124 18 OEM front tank supply and return transfer tube kit for generator set 2003-2005 020-0 1-12466 OEM front tank supply and return transfer tube kit for generator set 2004-2009 020-0A-125 83 OEM aft tank supply and return kit for generator set 2004-2009 020-08-1 2583 OEM aft tank supply and return kit for generator set 2004-2005 020-01-12615 OEM front tank fillneck kit 2004-2005 020-01-12594 OEM front tank supply and return transfer tube kit for generator set 2004-2005 020-01 -12617 OEM front tank supply and return transfer tube kit for generator set 2004-2005 020-01-1 2618 OEM rear tank supply and return transfer tube kit for generator set 2004-2009 020-01-12628 OEM fro nt tank fill neck kit 2004-2005 020-01-12637 OEM rear tank fillneck and transfer tube kit 2004-2005 020-0 1-1 2665 OEM front tank fillneck kit 2004-2009 020-0 1-1 2668 OEM front tank fillneck kit 2004-2005 020-01-1 2681 OEM rear tank supply and return transfer tube kit for generator set 2003-2009 020-0 1- 13322 OEM front tank supply and return transfer tube kit for generator set 2006-2009 020-01-1 3477 OEM tank supply and return transfer tube kit for generator set 2004-2009 020-01 - 14035 OEM midship tank supply and return transfer tube kit for generator set 2010-2014 020-01- 14947 G MT76 GENERA TOR EXTENSION KIT 2011 -20 14 020-0 1- 15462 GMT 800 FI FILLNECK ADAPTOR TUBE AND VENT ASSY Page 4 ofS D-288-1 30 6-23 -201 4

EXHIBIT A VEIUCLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Dodge PU 5.7 L 1998-2002 020-0 1- 11 973 OEM front tank supply and return transfer tube kit for generator set 1500 8.0 L 1998-2002 020-0 1- 11 977 OEM front tank supply and return transfer tube kit for generator set 2500 Gas 2003 020-0 1- 12360 OEM front tank fii lneck kit 3500 Dodge B-van 5.7 L 1998-2003 020-01- 12052 OEM front tank supply and return transfer tube kit for generator set 1500 Gas 2500 3500 Dodge Cab Chassis 5.7 L 2009 020-01-13720 OEM aft tank supply and return kit for generator set 8.0 L 2009 020-01 -13721 OEM aft tank supply and return kit for generator set Gas Dodge Promaster 3.6L 20 14 020-01- 15941 OEM front tank supply and return transfer tube kit for generator set Dodge Promaster 3.6L 2014 020-0 1-15946 OEM front tank supply and return transfe r tube kit for generator set Gas Nissan 5.6 L 2011 -14 020-0 1-15305 OEM tank supply and return transfer tube kit NV-3500 Gas Page 5 ofS D-288-13 0 6-23-2014

« +


Document Created: 2014-08-07 11:13:13
Document Modified: 2014-08-07 11:13:13

Previous E.O. D-288-129 | Previous E.O. D-287 | Next E.O. D-288-131 | Next E.O. D-289