Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on June 10, 2016.
As of Wednesday, January 22nd, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsRemarks
020-01-105891999-2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility boxOEM tank with formed fillneck and formed transfer tube kit

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-161
  • Executive Order 288-161 / D288-161
  • ARB # D-288-161
  • Executive Order No: D-288-161
  • C.A.R.B. No. D-288-161
  • Resolution D-288-161
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-161 PDF

D-288-161 Document:

CARB_D-288-161

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—288—161 Relating to Exemptions under Section 27156 of the Vehicle Code Transfer Flow, Inc. Transfer Tube Kits Pursuant to the authority vested in the Air Resources Board (ARB) by Vehicle Code (VC) Section 27156; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—14—012; IT IS ORDERED AND RESOLVED: That installation of the Transfer Tube Kits, manufactured by Transfer Flow, Inc. (TFI) of 1444 Fortress Street, Chico, California 95973, has been found not to reduce effectiveness of the applicable vehicle pollution control systems as listed in Exhibit A, and therefore, the Transfer Tube Kits are exempt from the prohibitions in VC Section 27156. This Executive Order covers kits used with California—certified 2016 or older model—year small off—road engines rated at 19 kilowatts or less or large spark ignition engines rated at or below 50 horsepower. This Executive Order is based on an engineering evaluation of the impacts the Transfer Tube Kits have on the vehicles‘ evaporative emissions, refueling emissions, and On—Board Diagnostic II Systems. This Executive Order is valid provided that installation instructions for the Transfer Tube Kits do not recommend tuning the vehicles or engines to specifications different from those of the vehicle or engine manufacturers. Changes made to the design or operating conditions of the Transfer Tube Kits, as exempt by ARB, which adversely affect the performance of the vehicle‘s or engine‘s pollution control system, shall invalidate this Executive Order. Marketing of the Transfer Tube Kits using identification other than that shown in this Executive Order or for an application other than that listed in this Executive Order shall be prohibited unless prior approval is obtained from ARB. Exemption of the Transfer Tube Kits shall not be construed as an exemption to sell, offer for sale, or advertise any component of the Transfer Tube Kits as individual devices. This Executive Order shall not apply to any Transfer Tube Kits advertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an ultimate purchaser.

4. This Executive Order does not constitute any opinion as to the effect the use of the Transfer Tube Kits may have on any warranty either expressed or implied by the vehicle or engine manufacturer. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. In addition to the foregoing, ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of California Code of Regulations, Title 13, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY ARB OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TFI‘S TRANSFER TUBE KITS. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten—day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the Executive Order may not be revoked until a determination is made after a hearing that grounds for revocation exist. Executed at El Monte, California, this /p%i day of June 2016. ~ &?{_&fl»wv/ izAnnette Rebert, Chief missions Compliance, Automotive Regulations and Science Division TRANSFER FLOW, INC. — TRANSFER TUBE KITS — D—288—161

Transfer Flow, Inc. Transfer Tube Kits D—288—161 Exhibit A Kit Number Model Year Make/Model Description 020—01—10589 1999—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box OEM tank with formed fillneck and formed transfer tube kit 020—01—10591 1999—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box OEM tank with straight fillneck and formed transfer tube kit 020—01—10592 |1999—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box OEM tank with straight fillneck and formed transfer tube kit 020—01—13145 2005—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box OEM aft tank supply and return kit for generator set 020—01—13146 2005—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box OEM tank supply and return transfer tube kit for generator set 020—01—13150 2005—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box | OEM tank supply and return transfer tube kit for generator set 020—01—13151 2005—2016 5.4, 6.2, 6.8, 7.5L Ford pick up, cab chassis converted to flatbed or utility box OEM tank supply and return transfer tube kit for generator set 020—01—12667 2004—2016 6.8, 6.2L Ford stripped chassis OEM aft tank supply and return kit for generator set 020—01—12679 1999—2014 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 OEM front tank supply and return transfer tube kit for generator set 020—01—13001 1999—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 OEM front tank supply and return transfer tube kit for generator set 020—01—13124 2004—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 OEM front tank supply and return kit for generator set 020—01—13126 2004—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 OEM tank supply and return transfer tube kit for generator set 020—01—13147 2004—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 OEM aft tank supply and return kit for generator set 020—01—13153 2004—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 OEM aft tank supply and return kit for generator set 020—01—15271 2011—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 EVAN T.T. KIT FOR CARB/DIESEL GEN OR SM CARB ENGINE 4.3, 4.8, 5.3, 5.7, 6.0, 7.4, 8. 1L GM C/K 1500, 2500, 3500, 3500 HD pick up, 020—01—11969 1992—2016 OEM front tank supply and return transfer tube kit for generator set cab chassis converted to flatbed or utility box 1 4.3, 4.8, 5.3, 5.7, 6.0, 7.4, 8. 1L GM C/K 1500, 2500, 3500, 3500 HD pick up, 020—01—15392 2011—2016 OEM front tank supply and return transfer tube kit for generator set cab chassis converted to flatbed or utility box 4.3, 4.8, 5.3, 5.7, 6.0, 7.4, 8. 1L GM C/K 1500, 2500, 3500, 3500 HD pick up, 020—01—15616 2012—2016 — OEM front tank supply and return transfer tube kit for generator set cab chassis converted to flatbed or utility box 020—01—11969 1996—2016 4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis OEM front tank supply and return transfer tube kit for generator set 020—01—12311 2004—2016 4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis OEM front tank supply and return transfer tube kit for generator set 020—01—12574 2004—2016 4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis | OEM front tank supply and return transfer tube kit for generator set 020—01—12742 2003—2016 4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis | OEM front tank supply and return transfer tube kit for generator set 020—01—12617 2004—2016 ‘4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis OEM front tank supply and return transfer tube kit for generator set 020—01—13322 2003—2016 4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis OEM front tank supply and return transfer tube kit for generator set 020—01—15997 2014—2016 5.7, 8.0L Dodge cab chassis OEM front tank supply and return transfer tube kit for generator set 020—01—15941 2014—2016 3.6L Dodge Promaster OEM front tank supply and return transfer tube kit for generator set 020—01—15946 2014—2016 3.6L Dodge Promaster OEM front tank supply and return transfer tube kit for generator set 020—01—15305 2011—2016 4.0L, 5.6L Nissan NV—3500 OEM tank supply and return transfer tube kit 020—01—16075 2014—2016 3.5L, 3.7L FORD TRANSIT 2014—2015 FORD TRANSIT VAN TT KIT 020—01—16076 2014—2016 3.5L, 3.7L FORD TRANSIT / 2014—2015 FORD TRANSIT VAN TT KIT 020—01—15397 2003—2016 4.3, 4.8, 5.3, 5.7, 6.0L GM G1500, 2500, 3500, cutaway chassis OEM front tank supply and return transfer tube kit for generator set 4.3, 4.8, 5.3, 5.7, 6.0, 7.4, 8. 1L GM1500, 2500, 3500, 3500 HD pick up, 020—01—16179 2011—2016 cab chassis GM 2500/3500 HD PICKUP FI GEN DRAW KIT 020—01—15019 2010—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 UHAUL 0.500 OD EMMI 020—01—13954 2004—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 04—15 FD EVAN IN—TANK FIT.T. KIT 020—01—15098 2011—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 EVAN IN TANK PUMP GEN T.T. KIT 020—01—15376 2010—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 UHAUL 10—15 FD EVAN CUTAWAY 0.375 SUPPLY 020—01—15134 2011—2016 4.2, 4.6, 5.4, 6.8, 7.5, 6.2L Ford E150, 250, 350, 450 |FILLNECK KIT 020—01—16232 2015—2016 5.7L, 6.4L, Dodge 2500, 3500 pickup OEM tank with formed fillneck and formed transfer tube kit


Document Created: 2016-06-16 12:03:55
Document Modified: 2016-06-16 12:03:55

Previous E.O. D-288-160 | Previous E.O. D-287 | Next E.O. D-288-162 | Next E.O. D-289