Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on August 13, 2001.
As of Tuesday, September 17th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
020-01-082711987-1997 Ford PU or Cab Chassis Conversions to Flatbeds or Utility Boxes 7.3L Diesel, OEM front tank/formed fillneck

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-22
  • Executive Order 288-22 / D288-22
  • ARB # D-288-22
  • Executive Order No: D-288-22
  • C.A.R.B. No. D-288-22
  • Resolution D-288-22
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-22 PDF

D-288-22 Document:

CARB_D-288-22

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—288—22 Relating to Exemptions under Section 27156 of the Vehicle Code Transfer Flow, Inc. Replacement Fillneck Kits Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority ves{ed m the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That installation of the Replacement Fillneck Kits, manufactured by Transfer Flow, Inc. of 1444 Fortress Street, Chico, California 95926, has been found not to reduce the effectiveness of the applicable vehicle pollution control system, and therefore, the Replacement Fillneck Kits are exempt from the prohibitions of Section 27156 of the Vehicle Code as listed in Exhibit A. This exemption is based on engineering evaluation of the impact the Replacement Fillneck Kits have on emissions and On—Board Diagnostic II (OBD II) Systems of the vehicles. This Executive Order is valid provided that installation instructions for the Replacement Fillneck Kits do not recommend tuning the vehicles to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the Replacement Fillneck Kits, as exempt by the ARB, which adversely affect the performance of the vehicle‘s pollution control system, shall invalidate this Executive Order. Marketing of the Replacement Fillneck Kits using identification other than that shown in this Executive Order or for an application other than that listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. Exemption of the Replacement Fillneck Kits shall not be construed as an exemption to sell, offer for sale, or advertise any component of the Replacement Fillneck Kits as individual devices. This Executive Order shall not apply to any Repladement Fillneck Kits adVertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an ultimate purchaser. This Executive Order does not constitute any dpinion as to the effect the use of the Replacement Fillneck Kits may have on any warranty either expressed or implied by the vehicle manufacturer.

«2. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. In addition to the foregoing, the ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of California Code of Regulations, Title 13, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TRANSFER FLOW, INC.‘S REPLACEMENT FILLNECK KITS. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten—day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the Executive Order may not be revoked until a determination is made after a hearing that grounds for revocation exist. L Executed at El Monte, California, this _/3 / day of August 2001. . B. Sdmmerfield, Chief Mobile Source Operations Division TRANSFER FLOW, INC. — REPLACEMENT FILLNECK KITS — D—288—22

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU or 7.3 L 1987—1997 020—01—08271 OEM front tank/formed fillneck Cab Chassis Diesel . 1987—1997 020—01—09615 OEM front tank/straight fillneck Conversions to 1987—1997 020—01—08767 OEM front tank/straight fillneck Flatbeds or Utility Boxes Ford PU or 7.3 L 1987—1997 020—01—08272 OEM rear tank/formed fillneck Cab Chassis Diesel 1987—1997 020—01—09616 OEM rear tank/straight fillneck Conversions to 1987—1997 020—01—08290 OEM rear tank/formed fillneck Flatbeds or Utility Boxes 1987—1997 020—01—08768 OEM rear tank/straight fillneck Ford PU or 5.4 L 1987—1997 020—01—08273 OEM front tank/formed filineck Cab Chassis 7.5 L 1987—1997 020—01—09619 OEM front tank/straight fillneck Conversions to Gas 1987—1997 020—01—09617 OEM front tank/straight fillneck Flatbeds or Utility Boxes Ford PU or 5.4 L 1987—1997 020—01—08274 OEM rear tank/formed fillneck Cab Chassis 7.5 L 1987—1997 020—01—09618 OEM rear tank/straight fillneck Conversions to Gas 1987—1997 020—01—08291 OEM rear tank/formed fillneck Flatbeds or Utility Boxes 1987—1997 020—01—09620 OEM rear tank/straight fillneck Ford PU or 7.3 L 1999—2002 020—01—10585 OEM tank with formed fillneck and formed transfer tube Cab Chassis Diesel 1999—2002 020—01—10586 OEM tank with formed fillneck and straight transfer tube Conversions to 1999—2002 020—01—10587 OEM tank with straight fillneck and formed transfer tube Flatbeds or Utility Boxes 1999—2002 020—01—10588 OEM tank with straight fillneck and straight transfer tube Ford PU or 5.4 L 1999—2002 020—01—10589 OEM tank with formed fillneck and formed transfer tube Cab Chassis 6.8 L 1999—2002 020—01—10590 OEM tank with formed fillneck and straight transfer tube Conversions to Gas 1999—2002 020—01—10591 OEM tank with straight fillneck and formed transfer tube Flatbeds or Utility Boxes 1999—2002 020—01—10592 OEM tank with straight fillneck and straight transfer tube 1999—2002 020—01—11679 OEM tank supply and return transfer tube kit for generator set Ford PU 7.3 L 1987—1997 020—01—09292 OEM front tank/standard bed F250/350 HD Diesel 1987—1997 020—01—09284 OEM front tank/dual bed 1987—1997 020—01—08047 TFI front tank/standard bed 1987—1997 020—01—08048 TFI front tank/dual bed Ford PU 7.3 L 1987—1997 020—01—09291 OEM rear tank/standard bed F250/350 HD Diesel 1987—1997 020—01—09285 OEM rear tank/dual bed 1987—1997 020—01—06930 TFI rear tank/standard bed 1987—1997 020—01—06929 TFI rear tank/dual bed Page 1 of 3

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU 5.4 L 19871997 020—01—06937 OEM front tank/standard bed F250/350 HD 7.5 L 1987—1997 020—01—06940 OEM front tank/dual bed Gas 1987—1997 020—01—08046 TFI front tank/standard bed 1987—1997 020—01—08045 TFI front tank/dual bed Ford PU 5.4 L 1987—1997 020—01—06941 Rear tank/standard bed F250/350 HD 7.5 L 1987—1997 020—01—06942 Rear tank/dual bed Gas 1987—1997 020—01—08050 TFI rear tank/standard bed 1987—1997 020—01—08049 TFI rear tank/dual bed Ford PU 5.4 L 1990—1997 222—01—11518 OEM front tank kit for Trax—systems F250/350 HD 7.5 L Gas Ford E—van 4.2 L 1992—2002 020—01—11764 OEM front tank supply and return transfer tube kit E150, E250, E350 4.6 L for generator set 5.4 L 6.8 L 7.5 L GM PU or 6.2 L 1990—2002 020—01—08275 OEM front and rear tank with formed fillneck Cab Chassis 6.5 L 1990—2002 020—01—09624 OEM front and rear OEM tank with straight fillneck Conversions to Diesel Flatbeds and Utility Boxes C©1500/2500/3500/3500 HD K1500/2500/3500/3500 HD GM Sierra Silverado PU 6.6 L 1999—2002 020—01—1 1725 OEM front tank with straight fillneck and formed transfer tube and Cab Chassis Diesel 1999—2002 222—01—11518 OEM front tank kit for Trax systems Conversions to 1999—2002 020—01—11726 OEM front PU tank fast fill fillneck kit Flatbeds or Utility Boxes GM PU or 4.3 L 1990—1997 020—01—08276 OEM front and rear OBEM tank with formed fillneck Cab Chassis 4.8 L 1990—1997 020—01—09625 OEM front and rear OEM tank with straight fillneck * Conversions to 5.3 L 1992—2002 020—01—11710 OEM front tank supply and return transfer tube kit for generator set 5.7 L Flatbeds or Utility Boxes C1500/2500/3500/3500 HD 6.0 L K1500/2500/3500/3500 HD 74 L 8.1 L Gas Page 2 of 3

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION — MAKE _ SIZE YEAR NUMBER DESCRIPTION . GM Sierra Silverado PU 4.3 L 1999—2002 020—01—11763 OEM front tank suppl ci for generator set pply and return transfer tube kit and Cab .Chassw 4.8 L 1999—2002 020—01—1 1724 OEM front tank with straight fillneck and formed trans%’cr tube Conversions to 5.3 L Flatbeds or Utility Boxes 6.0 L C/25000 HD/35000/36000 8.1 L K/25000 HD/35000/36000 Gas orao8. GM a2500, 63500 G—van 571 4.3 L | 1996—2002 020—01—11765 OEM front tank supply transfer tube pply and return n transfer ki for generator set tube kit 7.4 L Page 3 of 3


Document Created: 2005-09-01 12:44:52
Document Modified: 2005-09-01 12:44:52

Previous E.O. D-288-21 | Previous E.O. D-287 | Next E.O. D-288-23 | Next E.O. D-289