Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on April 2, 2009.
As of Monday, January 20th, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
020-01-082731987-1997 Ford PU/Cab Chassis 5.4/6.8/7.5 liter gasolineOEM front tank/formed fillneck kit

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-83
  • Executive Order 288-83 / D288-83
  • ARB # D-288-83
  • Executive Order No: D-288-83
  • C.A.R.B. No. D-288-83
  • Resolution D-288-83
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-83 PDF

D-288-83 Document:

CARB_D-288-83

State of California AIR RESOURCES BOARD EXECU-TIVE ORDER D-288-83 Relating to Exemptions under Section 27156 of the Vehicle Code Transfer Flow, Inc. Retrofit Fillneck Kits and Transfer Tube'Kits Pursuant to the authority vested in the Air Resources Board by Section 271 56 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 3951 5 and 39516 of the Health and Safety Code and Executive Order G-02-003; IT IS ORDERED AND RESOLVED: That installation of the Retrofit Fillneck Kits and Transfer Tube Kits, manufactured by Transfer Flow, Inc. of 1444 Fortress Street, Chico, California 95973, has been found not to reduce the effectiveness of the applicable vehicle pollution control system, and therefore, the Retrofit Fillneck Kits and Transfer Tube Kits are exempt from the prohibitions in Section 271 56 of the Vehicle Code as listed in Exhibit A. This Executive Order applies to kits used with 2009 or older model-year small off-road engines (engines rated at 19 kilowatts or less). This Executive Order is based on an engineering evaluation of the impact the Retrofit Fillneck Kits and Transfer Tube Kits have on the vehicles' evaporative emissions, On-Board Refueling Vapor Recovery emissions, and On-Board Diagnostic II Systems. This Executive Order is valid provided that installation instructions for the Retrofit Fillneck Kits and Transfer Tube Kits do not recommend tuning the vehicles to specifications different from those of the vehicle manufacturers. Changes made to the design or operating conditions of the Retrofit Fillneck Kits and Transfer Tube Kits, as exempt by the Air Resources Board, which adversely affect the performance of the vehicle's pollution control system, shall invalidate this Executive Order. Marketing of the Retrofit Fillneck Kits and Transfer Tube Kits using identification other than that shown in this Executive Order or for an application other than that listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of the Retrofit Fillneck Kits and Transfer Tube Kits shall not be construed as an exemption to sell, offer for sale, or advertise any component of the Retrofit Fillneck Kits and Transfer Tube Kits as individual devices.

This Executive Order shall not apply to any Retrofit Fillneck Kits and Transfer Tube Kits advertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an ultimate purchaser. This Executive Order does not constitute any opinion as to the effect the use of the Retrofit Fillneck Kits and Transfer Tube Kits may have on any warranty either expressed or implied by the vehicle manufacturer. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. In addition to the foregoing, the Air Resources Board reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add-on or modified part continues to meet the standards and procedures of California Code of Regulations, Title 13, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI-POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TRANSFER FLOW, INC.'S RETROFIT FILLNECK KlTS AND TRANSFER TUBE KITS. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten-day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the Executive Order may not be revoked until a determination is made after a hearing that grounds for revocation exist. L d - Executed at El Monte, California, this day of April 2009. ette Hebert, Chief Source Operations Division TRANSFER FLOW, INC. RETROFIT FILLNECK KlTS AND TRANSFER TUBE KlTS - D-288-83

. . EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU or 5.4 L 1987-1997 020-0 1-08273 OEM front tawformed fillneck kit Cab Chassis Gas 1987-1997 020-0 1-08274 OEM rear tank/formed fillneck kit Conversio~lsto 6.8 L 1987-1997 020-01-08291 OEM rear tanklformed fillneck kit Flatbeds or Utility Boxes 7.5 L 1987-1997 020-01-09619 OEM front tank/straight fillneck kit 1987- 1997 020-0 1-09617 OEM front tank/straight fillneck kit 1987-1997 r020-01-09618 OEM rear tanklstraight fillneck kit 1987- 1997 020-0 1-09620 OEM rear taustraight fillneck kit 1999-2009 020-0 1- 10589 OEM tank with formed fillneck and formed transfer tube kit OEM tank with formed fillneck and straight transfer tube kit OEM tank with straight fillneck and formed transfer tube kit OEM tank with straight fillneck and straight transfer tube lut OEM tank supply and return transfer tube kit for generator set OEM tank supply and return transfer tube kit for generator set OEM tank supply and return transfer tube kit for generator set OEM aft tank supply and return kit for generator set OEM tank supply and return transfer tube kit for generator set OEM tank supply and return transfer tube kit for generator set OEM tank supply and return transfer tube kit for generator set OEM aft tank supply and return kit for generator set OEM front tank fillneck kit OEM front talk fillneck kit OEM front tank fillneck kit OEM rnidship tank ORVR fillneck kit OEM rnidshlp tank ORVR fillneck kit Ford 6.8 L OEM aft tank supply and return kit for generator set Stripped Chassis Gas OEM rear tank fillneck and transfer tube kit OEM fuel supply, return andor emission extension kit OEM fie1 supply, return andor emission extension kit Page 1 of 5

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU 5.4 L 1987-1997 OEM front tanklstandard bed kit F2501350 HD 6.8 L 1987- 1997 OEM front tankldual bed kit 7.4 L 1987-1997 Rear tanklstandard bed kit Gas 1987-1997 Rear tanWdua1 bed kit 1987- 1997 TFI front tanklstandard bed kit 1987-1997 TFI fiont tanMdual bed kit 1987-1997 TFI rear tanWdua1 bed kit 1987-1997 TFI rear tanklstandard bed kit 1987-2009 TFI cross the bed tank with camper shell fillneck kit 1987-2009 TFI cross the bed tank with camper shell fillneck kit 2005-2009 OEM front tank supply and return transfer tube kit for generator set 2005-2009 OEM front tank supply and return transfer tube kit for generator set 2005-2009 OEM midship talk supply and return transfer tube kit for generator set 2005-2009 OEM midship tank supply and return transfer tube kit for generator set Ford E-van 4.2 L OEM front tank supply and return transfer tube kit for generator set E150, E250, E350, E450 4.6 L OEM aft talk E350lE450 supply and retui-n transfer tube kit for generator set .5.4 L OEM aft tank E350lE450 supply and return transfer tube kit for generator set 6.8 L OEM front tank supply and return transfer tube kit for generator set 7.5 L OEM front tank supply and return transfer tube kit for generator set Gas OEM front tank supply and return transfer tube kit for generator set OEM fi-ont tank supply and return kit for generator set OEM tank supply and return transfer tube kit for generatox-set OFM aft tank supply and return kit for generator set OEM aA tank supply and return kit for generator set OEM aft tank supply and return kit for generator set OEM tank supply and return transfer tube kit for generator set OEM aft tank fillneck OEM tank fillneck and canister relocation kit Page 2 of 5

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION GM PU or 4.3 L OEM front and rear OEM tank with-formed fillneck kit Cab Chassis 4.8 L OEM front and rear OEM tank with straight fillneck kit Coilversioils to 5.3 L OEM front tank supply and return transfer tube kit for generator Flatbeds or Utility Boxes 5.7 L OEM front tank supply and return transfer tube kit for generator C1500/2500/3500/3500 HD 6.0 L OEM front tank with straight fillneck and formed transfer tube kit K1500/2500/3500/3500 HD 7.4 L OEM front tank supply and return transfer tube kit for generator set 8.1 L OEM front tank supply and return transfer tube kit for generator set Gas OEM front tank supply tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM front tank fillneck kit OEM front tank fillneck kit OEM fi-ont tank fillneck kit OEM front tank fillneck kit OEM front tank fillneck kit OEM fi-onttank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set GM C4500/C5500 8.1 L Front tank supply and return transfer tube kit for generator set Cab Chassis Gas OEM aft tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set Page 3 of 5

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION GM G-van 4.3 L OEM front tank supply and return transfer tube kit for generator set G1500, G2500, G3500 4.8 L OEM front tank supply and return transfer tube kit for generator set GM G Cutaway Chassis 5.3 L OEM fiont tank fillneck kit 5.7 L OEM front tank fillneck kit 6.0 L OEM front tank supply and return transfer tube kit for generator set Gas OEM fi-ont tank supply and return transfer tube kit for generator set OEM front tank supply and retun1 transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM aft tank supply and return lut for generator set OEM aft tank supply and return kit for generator set OEM fiont tank fillneck kit OEM front tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM rear tank supply and return transfer tube kit for generator set OEM front tank fillneck kit OEM rear tank fillneck and transfer tube kit OEM front tank fillneck kit OEM front tank fillneck kit OEM rear tank supply and return transfer tube kit for generator set OEM front tank supply and return transfer tube kit for generator set OEM tank stlpply and return transfer tube kit for generator set OEM midship tank supply and return transfer tube kit for generator set Page 4 of 5

EXHIBIT A VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Dodge PU 5.7 L 1998-2002 020-01-1 1973 OEM front tank supply and return transfer tube kit for generator set 1500 8.0L 1998-2002 020-01-11977 OEM fi-ont tank supply and return transfer tube kit for generator set 2500 Gas 2003 020-01 - 12360 OEM front tank fillneck kit 3500 ' Dodge B-van . 5.7.L 1998-2003 020-01-12052 OEM front tank supply and return transfer tube kit for generator set 1500 Gas 2500 3500 Dodge Cab Cllassis 5.7 L 2009 020-01 - 13720 OEM aft tank supply and return kit for generator set 8.0L 2009 020-01 - 13721 OEM aft tank supply and return h t for generator set Gas Page 5 of 5


Document Created: 2009-08-03 15:50:53
Document Modified: 2009-08-03 15:50:53

Previous E.O. D-288-82 | Previous E.O. D-287 | Next E.O. D-288-84 | Next E.O. D-289