Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on January 5, 1993.
As of Monday, January 20th, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
E919P, E923P E1004P,E1005P E10291987 and older model-year GM vehicles with 267-400 CID carbureted gasoline engines

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-291
  • Executive Order 291 / D291
  • ARB # D-291
  • Executive Order No: D-291
  • C.A.R.B. No. D-291
  • Resolution D-291
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-291 PDF

D-291 Document:

CARB_D-291

‘(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—291 Relating to Exemptions Under Section 27156 of the Vehicle Code ELGIN INDUSTRIES CAMSHAFTS Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45~5; IT IS ORDERED AND RESOLVED: That the installation of the camshafts, part numbers E919P, E923P, El10O29P, El004P, E10O0O5P and E10G69P, manufactured by Camshaft Machine Company and marketed by Elgin Industries of 1100 Jansen Farm Drive, Elgin, Illincis 60120 has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for 1987 and older General Motors vehicles powered with a 267 CID (4.4L) to 400 CID (6.6L) carbureted gasoline engines. This Executive Order is valid provided that installation instructions for — this camshaft will not recommend tuning the vehicle to specifications different from those submitted by Elgin Industries. Changes made to the design or operating conditions of the camshafts, as exempt by the Air Resources Board, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of this camshaft using any identification other than that shown in this Executive Order or marketing ‘of this camshaft for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of the camshaft shall not be construed as exemption to sell, offer for sale, or advertise any component of the kit as an individual device. This Executive Order does not constitute any opinion as to the effect the use of this camshaft may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF ELGIN INDUSTRIES‘ CAMSHAFTS.

~ _: . Oc ~/ +.3. ELGIN INDUSTRIES ‘EXECUTIVE ORDER D—291 L6 | CAMSHAFTS (Page 2 of 2) uo\ n No claim of any kind, such as "Approved by the Air Resources Board" may be — made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after ten day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. Executed at El Monte, California, this CST day of January, 1993. Astistant Division Chief Mobile Source Division e ® * * r ptmm dorse e * . : ies


Document Created: 2005-09-01 12:41:25
Document Modified: 2005-09-01 12:41:25

| Previous E.O. D-290 | Next E.O. D-291-1 | Next E.O. D-292