Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on November 30, 1995.
As of Saturday, February 22nd, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
E860P, E919P E922P, E923P E1005P1987 and older GM vehicles equipped with a carbureted 267 to 350 CID V-8 gasoline engine.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-291-1
  • Executive Order 291-1 / D291-1
  • ARB # D-291-1
  • Executive Order No: D-291-1
  • C.A.R.B. No. D-291-1
  • Resolution D-291-1
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-291-1 PDF

D-291-1 Document:

CARB_D-291-1

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—291—1 Relating to Exemptions Under Section 27156 of the Vehicle Code ELGIN INDUSTRIES CAMSHAFTS Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That the installation of the following camshafts: E1120P, E1029P, E922P, E1129P, E1575P, E1100P, E1127P, E1005P, E1101P, E860P, E923P, E1105P, E919P, and E1128P manufactured by Engine Power Components, Inc., 1333 Fulton St. Grand Haven, Michigan 49417 and marketed by Elgin Industries, has been found not to reduce the effectiveness of the applicable vehicle poliution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for 1987 and older General Motors vehicles equipped with a carbureted 267 to 350 CID V—8 gasoline engine. This Executive Order is valid provided that the installation of the camshafts will not recommend tuning the vehicle to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the camshafts, as exempt by the Air Resources Board, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the camshafts using any identification other than that shown in this Executive Order or marketing of the camshafts for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. This Executive Order does not constitute any opinion as to the effect that the use of the camshafts may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF ELGIN INDUSTRIES‘ CAMSHAFTS. No claim of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any advertising or other oral or written communication.

Etgin Industries EXECUTIVE ORDER D—291—1 ~Camshafts (Page 2 of 2) Violation of any of the above conditions shall be grounds for revocation of this order. . The order may be revoked only after ten day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. «ol Executed at El Monte, California, this 20 ~day of November 1995. stistant Division Chief Mobile Source Division


Document Created: 2005-09-01 12:43:45
Document Modified: 2005-09-01 12:43:45

Previous E.O. D-291 | Previous E.O. D-290 | Next E.O. D-291-2 | Next E.O. D-292