Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on June 7, 2001.
As of Friday, October 4th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsRemarks
M-60001-A501988-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.Intake Manifold Kit
M-6049-L3031988-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.GT-40 Cylinder Head Assembly
M-7003-A M-7003-X1979 and 1982-93 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.T-5 trans 305/325 ft lb ratings
M-8509-A501986-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.Underdrive Pulley Kit
M-9430-SSC M-9430-C501986-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.Hi-Flow Shorty Headers
M-9A407-A50 M-9407-A501986-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.Hi-Flow EFI 5.0L Mustang Fuel Pump
M-9E926-A302 M-9926-A3021988-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.Hi-Flow Throttle Body
M-9H474-A50 M-9474-A501988-1993 Ford Mustang vehicles equipped with a 5.0L EFI gasoline engine.Hi-Flow EGR Spacers

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-308-10
  • Executive Order 308-10 / D308-10
  • ARB # D-308-10
  • Executive Order No: D-308-10
  • C.A.R.B. No. D-308-10
  • Resolution D-308-10
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-308-10 PDF

D-308-10 Document:


CARB_D-308-10

                                                                                   (Page 1 of 2)

                                       State of California
                                 AIR RESOURCES BOARD



                               EXECUTIVE ORDER D—308—10
                        Relating to Exemptions Under Section 27156
                                     of the Vehicle Code


        |                 FORD MOTOR COMPANY
 "HI—FLOW SHORTY HEADERS, HI—FLOW THROTTLE BODY, HI—FLOW EGR SPACER,
   INTAKE MANIFOLD KIT, GT—40 CYLINDER HEAD ASSEMBLY, HEAVY—DUTY T—5
TRANSMISSION, UNDERDRIVE PULLEY KIT, AND HI—FLOW EFI 5.0L MUSTANG FUEL
                                  PUuMP"
Pursuant to the authority vested in the Air Resources Board by Section 27156 of the
Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516
of the Health and Safety Code and Executive Order G—45—9;

IT IS ORDERED AND RESOLVED: That the Hi—Flow Shorty Headers, Hi—Flow Throttle
Body, Hi—Flow EGR Spacer, Intake Manifold Kit, GT—40 Cylinder Head Assembly, Heavy—
duty T—5 Transmission, Underdrive Pulley Kit, and Hi—Flow EFI 5.0L Mustang Fuel Pump
(collectively the "5.0L EFI Ford Mustang Kits") manufactured by Ford Motor Company
(Ford) of 17225 Federal Drive, Allen Park, Michigan 48101—3613, have been found not to
reduce the effectiveness of required motor vehicle pollution control systems and, therefore,
are exempt from the prohibitions of Section 27156 of the California Vehicle Code for the
5.0L EF} Ford Mustang gasoline powered vehicles listed in Appendix A.

This Executive Order is valid provided the installation instructions for the listed devices will
not recommend tuning the vehicle to specifications different from those of the vehicle
manufacturer.

Changes made to the design or operating conditions of the devices, as exempted by the
Air Resources Board (ARB), that adversely affect the performance of a vehicle‘s pollution
control system shall invalidate this Executive Order.

Marketing of the devices using any identification other than those shown in this Executive
Order or marketing of these devices for applications other than those listed in this
Executive Order shall be prohibited unless prior approval is obtained from the ARB.

This Executive Order does not constitute any opinion as to the effect that the use of these
devices may have on any warranty either expressed or implied by the vehicle
manufacturer.


FORD MOTOR COMPANY                                 EXECUTIVE ORDER D—308—10
"5.0L EFI FORD MUSTANG KITS"                       (Page 2 OF 2)


This exemption is issued based on cold—start CVS—75 emission tests conducted at an
independent laboratory and the ARB‘s Haagen—Smit Laboratory which showed that the
5.0L EFI Ford Mustang Kits did not adversely affect exhaust emissions of the tested
vehicle.

THIS EXECUTIVE ORDER DOES NOT CONSTITUE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE 5.0L EFI FORD
MUSTANG KITS.

No claims of any kind, such as "Approved by the Air Resources Board" may be made with
respect to the action taken herein in any advertising or other oral or written communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The
order may be revoked only after ten day written notice of intention to revoke the order, in
which period the holder of the order may request in writing a hearing to contest the
proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of
the request, and the order may not be revoked until a determination is made after the
hearing, that grounds for revocation exist.

Executive Order No. D—308 dated April 6, 1993, is hereby superseded and of no further
force and effect.

Executed at El Monte, California, this     Z 7Z/:Tay of June 2001.




                                         R. B. Summerfield, Chief
                                         Mobile Source Operations Division


                                        APPENDIX A


Device                          Vehicle Model—Year   Part Number
Hi—Flow Shorty Headers          1986 — 1993          M—9430—SSC/M—9430—C50
Hi—Flow Throttle Body           1988 — 1993          M—9E926—A302/M—9926—A302
Hi—Flow EGR Spacer              1988 — 1993          M—9H474—A50/M—9474—A50
Intake Manifold Kit             1988 — 1993          M—60001—A50
— Upper Intake Casting                               M—9424—A51
—   Lower Intake Casting                             M—9461—A50
GT—40 Cyl. Hd. Assembly         1988 — 1993          M—6049—L303
— Machined Casting                                   M—6049—L302
— Valve Train Kit                                    M—6090—L302
Heavy—duty T—5 Transmission     1979/1982 — 1993     M—7003—A (305 Ft—lbs. Rating)
                                                     M—7003—%X (325 Ft—lbs. Rating)
—   InPut Gear                                       M—7017—B
—    1"" Speed Gear                                  M—7100—D
—   2"" Speed Gear                                   M—7102—B (305 Ft—lbs. Rating)
                                                     M—7102—%X (325 Ft—lbs. Rating)
—   Countershaft Cluster Gear                        M—7113—A (305 Ft—lbs. Rating)
                                                     M—7113—X (325 Ft—lbs. Rating)
—   3 Speed Gear                                     M—7340—A (305 Ft—lbs. Rating)
                                                     M—7340—X (325 Ft—lbs. Rating)
Underdrive Pulley Kit           1986 — 1993          M—8509—A50
Hi—Flow EFI 5.0L Mustang        1986 — 1993          M—9A407—A50/M—9407—A50
Fuel Pump



Document Created: 2005-09-01 12:43:34
Document Modified: 2005-09-01 12:43:34

Previous E.O. D-308-9 | Previous E.O. D-307 | Next E.O. D-308-11 | Next E.O. D-309