Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on February 24, 1998.
As of Thursday, December 13th, 2018 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
31-91501984-1998 Harley-Davidson 80 cubic inch

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-355-5
  • Executive Order 355-5 / D355-5
  • ARB # D-355-5
  • Executive Order No: D-355-5
  • C.A.R.B. No. D-355-5
  • Resolution D-355-5
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-355-5 PDF

D-355-5 Document:



                                                                             (Page 1 of 2)

                                          State of California
                                      AIR RESOURCES BOARD

                                     EXECUTIVE ORDER D-3 5 5- 5
                              Relating to Exemptions Under Section 27 156
                                           of the Vehicle Code

                                          S & S CYCLE, INC.
                                       S & S Replacement Engine


Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and

Pursuant to the authority       in the undersigned by Section 395 15 and Section 395 16 of the Health and
Safety Code and

IT IS ORDERED AND RESO VED: That the installation of the S & S Replacement Engine,

                              ,"
manufactured and marketed by S & S Cycle, Inc., Route 2 Highway G, Viola, Wisconsin 54664 has been
found not to reduce the effecti eness of the applicable motorcycle pollution control system and, therefore,
is exempt from the prohibition4 of Section 27156 of the Vehicle Code for all 1970 to 1998 Harley-
Davidson Motorcycles originally equipped with a carbureted, non-catalyst, Big Twin-Evolution engine as
listed below:

                Part No.                      Displacement                   Model-Year
                31-9150                       80 cubic inch                  1984-98
                31-9151                       88 cubic inch                  1984-98
                31-9152                       89 cubic inch                  1984-98
                3 1-9153                      90 cubic inch                  1984-98
                3 1-9154                      93 cubic inch                  1984-98
                31-9155                       96 cubic inch                  1984-98
                3 1-9156                      96 cubic inch                  1984-98
                3 1-9157                      79 cubic inch                  1970-84
                3 1-9158                      88 cubic inch                  1970-84

The S & S Replacement ~ n ~ i is  b aecomplete new engine which includes but not limited to the main
components listed in Exhibit A of this Executive Order.

This Executive Order is valid provided that the installation instructions for the S & S Replacement Engine
will not recommend tuning themotorcycle to specifications different from those of S & S Cycle, Inc.

Changes made to the design or loperating conditions of the S & S Replacement Engine, as exempt by the
Air Resources Board, which adversely affect the performance of the motorcycle's pollution control system
shall invalidate this Executive order.

Marketing of the S & S ~eplackmentEngine using any identification other than that shown in this
Executive Order or marketing +f the S & S Replacement Engine for an application other than those listed
in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board.
Exemption of the S & S Repla~ementEngine shall not be construed as exemption to sell, offer for sale, or
advertise any component of th$ kit as an individual device.

This Executive Order does not constitute any opinion as to the effect the use of the S & S Engine Package
may have on any warranty either expressed or implied by the motorcycle manufacturer.


S & S CYCLE, INC.                                             I
                                                                     EXECUTIVE ORDER D-355-5
S & S Replacement Engine                                             (Page 2 of 2)




THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
ANY CLAIMS OF THE APPLICANT CONCERNING ANTI-POLLUTION BENEFITS OR ANY
ALLEGED BENEFITS OF S & S CYCLE, INC.'S S & S REPLACEMENT ENGINE.

No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the
action taken herein in any advertising or other oral or written communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The order may be
revoked only after a ten-day written notice of intention to revoke the order, in which period the holder of
the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it
shall be held within ten days of receipt of the request and the order may not be revoked until a
determination after hearing that grounds for revocation exist.

Executed at El Monte, California, this   ~q c a y of February 1998.



                                             Mobile Source Operations Division


                                                                             Exhibit A

                                                              S&S Replacement Engine Bill of Materials
PartDescriptione*2s>hy ins                               s 6dragor* |ssmestzac|©agr© a| t SeorWl :h sas®"TE 4egrs w C[ .o < ger~".
Parts Required For Complete Engines                             Part No.    Part No.     Part No.    Part No.     Part No.       art No.         Part No.
Engine Part Number                ___                           31—9150       31—1951       31—9152       31—9153       31—9154       31—9155      31—9156
Super E Carb Kit W/ flanges                                      11—0442      11—0442       11—0442       11—0442       11—0442      106—2851      106—2851
Manifold, Super E                                             16—1628 (#8)| 16—1626 (#6)| 16—1628 (#8)] 16—1627 (#7)| 16—1627 (#7     16—1628       16—1628
Crankcase Assembly                                              31—0005       31—0011       31—0005       31—0011       31—0011   31—0077S—ASM 31—0078S—ASM
Gearcover Kit, crankcase                                         31—0211      31—0211       31—0211       31—0211       31—0211       31—0251    31—0251BLK
Oil Pump Kit 1992—UP Model Year BT                               31—6261      31—6261       31—6261       31—6261       31—6261    31—6205—ASM  31—6205—ASM
Flywheel Set, Special order— strokes thru 5" ‘36—Up BT____|   5SL 32—2050| 5SL 32—2050| 6SL 32—2060| 1SL 32—2010| 2SL 32—2020| 32—2230—ASM      32—2230—ASM
Connecting Rod Assebly — IBC — ‘84—Up BT                         34—7013      34—7013       34—7013       34—7013       34—7013       34—7073      34—7073
Sprocket Shaft Assembly, 70—Up BT                                33—2004      33—2004       33—2004       33—2004       33—2004     33—2004—S     33—20048
Pinion Shaft Asembly, standard ‘81—‘89 BT                        33—2027      33—2027       33—2027       33—2027       33—2027      33—20270     33—20270C
Pinion Shaft Conversion Kit— average size ‘90—Up BT              33—4148      33—4148       33—4148       33—4148       33—4148     33—4144—S     33—4144—S
Breather Gear Shim— .110" steel— ‘36—Up BT                       33—4201      33—4201       33—4201       33—4201       33—4201       33—4201       33—4201
Cam Lock Washer ‘58—Up BT                                        33—5201      33—5201       33—5201       33—5201       33—5201       33—5201       33—5201
Cam Thrust Washer .070" — ‘36—Up BT                              33—5205      33—5205       33—5205       33—5205       33—5205       33—5206       33—5206
Oil Pump Drive Shaft Gear— 241 — ‘36—Up BT                       33—4230      33—4230       33—4230       33—4230       33—4230     33—4230—S     33—4230—S
Right Main BearingAssembly (White/Gray)                          31—4005      31—4005       31—4005       31—4005       31—4005     31—4018—S     31—4018—S
Breather Gear, ‘77—Up BT                                         33—4236      33—4236       33—4236       33—4236       33—4236     33—4241—S     33—4241—S
Camshaft— ‘84—Up BT                                              33—5073      33—5073       33—5073       33—5073       33—5073      106—0218      106—0218
Tappet Guide Set                                                 33—5301      33—5301       33—5301       33—5301       33—5301    33—5301—ASM  33—5324—ASM
Tappet Assembly (includes HL2T kit)                              33—5341      33—5341       33—5341       33—5341       33—5341      33—5343A     33—5343A
Head Kit 3—5/8" Bore — ‘84—Up BT                                 90—1001      90—1001       90—1001       90—1001       90—1001    90—1004—ASM 90—1504S—ASM
Cylinder Kit 3— 5/8" Bore — ‘84—Up BT                            91—7210     91—7002X       91—7210       91—7503      91—7102X    91—7207—ASM  91—7707—ASM
Ring Set, piston                                                 94—1210      94—1210       94—1210       94—1210       94—1210   94—1210X—ASM 94—1210X—ASM
Head Bolt — Short — 84—Up V2                                     93—3027      93—3011       93—3027       93—3011       93—3028     93—3028—S     93—3028—S
Head Bolt — Long — 84—Up V2                                      93—3030          —         93—3030           —         93—3030     93—3029—S     93—3029—S
Keeper, pushrod cover                                            93—4014      93—4011       93—4014       93—4011       93—4014     93—4014—S     93—4014—S
Pushrod Set, adjustable steel — 84—Up BT                         93—5076      93—5017       93—5076       93—5018       93—5018    93—5076—ASM  93—5076—ASM
Flange, manifold — front & rear                                  16—0232       16—0232       16—0232       16—0232       16—0232      16—0232       16—0232
 # 90—1000M Flanges/ O—rings)                                    16—0233       16—0233       16—0233       16—0233       16—0233      16—0233       16—0233 _
O—rings, manifold                                                16—0235       16—0235       16—0235       16—0235       16—0235      16—0235       16—0235
Hardware, Cylinder Head                                         90—1000H     90—1000H      90—1000H      90—1000H      90—1000H    90—1004—ASM 90—1504S—ASM
Gasket Kit — Cylinder Head & Base Gaskets                      90—1000DB 90—1000DB 90—1000DB 90—1000DB 90—1000DB 90—1000DB—ASM 90—1000DB—ASM
Rocker Box Kit                          |                        90—4050      90—4050       90—4050       90—4050       90—4050    90—4095—ASM  90—4095—ASM
Owners Manual                                                   106—4920      106—4920      106—4920      106—4920      106—4920     106—4920      106—4920
Instruction Packet                                              106—4921      106—4921      106—4921      106—4921      106—4921     106—4921      106—4921
L.abel                                                          106—4922      106—4922      106—4922      106—4922      106—4922     106—4922      106—4922


                  (#90-1000M Flanges/O-rings)         16-0233     16-0233        16-0233     16-0233       16-0233      16-0233
O-rings, manifold                                     16-0235     16-0235        16-0235     16-0235       16-0235      16-0235
Hardware, Cylinder Head                              90-1OOOH    90- 1OOOI-I    90-1OOOH    90-10001I     90-100013    90-1000H
Gasket Kit - Cylinder Head & Base Gaskets           90-1000DB    90-1000DB     90-1000DB   90-100Ol)B    90-1000DB    90-1000DB
Rocker Box Kit                                        90- 1050    90-4050        90-4050     90- lO'i0     9d-.1050     90-4050
Owners Manual                                   I
Instruction Packet



Document Created: 2009-05-28 14:18:16
Document Modified: 2009-05-28 14:18:16

Previous E.O. D-355-4 | Previous E.O. D-354 | Next E.O. D-355-6 | Next E.O. D-356