Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on September 30, 1997.
As of Monday, January 20th, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
59-6951984-1997 Harley Davidson motorcycles equipped with a 1338 cc engine, excluding those originally equipped with a catalyst and/or fuel injection system.It comprised of two aluminum alloy cylinder heads; a front and rear cylinder head. Combustion chamber is 69 cc and the cylinder heads have the capability of using two spark plugs per cylinder. No changes are recommended to the OEM tune-up specifications.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-368-10
  • Executive Order 368-10 / D368-10
  • ARB # D-368-10
  • Executive Order No: D-368-10
  • C.A.R.B. No. D-368-10
  • Resolution D-368-10
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-368-10 PDF

D-368-10 Document:

CARB_D-368-10

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—368—10 Relating to Exemptions Under Section 27156 ofthe Vehicle Code CUSTOM CHROME, INC. REV TECH HIGH COMPRESSION CYLINDER HEADS, PAN 59—695 Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That the installation of the Rev Tech High Compression Cylinder Heads, P/N 59—695, manufactured and marketed by Custom Chrome, Inc., 1610 Jacqueline Court, Morgan Hill, California 95037 has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for 1984—97 Harley Davidson motorcycles equipped with a 1338 co engine, excluding those originally equipped with a catalyst and/orfuel injection system . The Rev Tech Cylinder Heads are comprised of two aluminum alloy cylinder heads; a front and rear cylinder head. Combustion chamber is 69 ce and the cylinder heads have the capability of using two spark plugs per cylinder. No changes are recommended to the OEM tune—up specifications. Changes made to the design or operating conditions of the Rev Tech High Compression Cylinder Heads, P/N 59—695, as exempt by the Air Resources Board, which adversely affect the performance ofthe vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the Rev Tech High Compression Cylinder Heads, P/AN 59—695 using any identification other than that shown in this Executive Order or marketing of the Rev Tech High Compression Cylinder Heads, P/N 59—695 for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of the Rev Tech High Compression Cylinder Heads, PAN 59—695 shall not be construed as exemption to sell, offer for sale, or advertise any component of the kit as an individual device. This Executive Order does not constitute any opinion as to the effect the use ofthe Rev Tech High Compression Cylinder Heads, P/N 59—695 may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF CUSTOM CHROME, INC.‘S REV TECH HIGH COMPRESSION CYLINDER HEADS, P/N 59—695. No claim of any kind, such as "Approved by the Air Resources Board", may be made with respectto the action taken herein in any advertising or other oral or written communication.

Custom Chrome, Inc. Executive Order D—368—10 Rev Tech High Compression Cylinder Heads, P/N 59—695 (Page 2 of 2) Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a ten—day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. Executed at El Monte, California, this A 227, da September 1997. Mobile Source Operations Division


Document Created: 2005-09-01 12:40:46
Document Modified: 2005-09-01 12:40:46

Previous E.O. D-368-9 | Previous E.O. D-367 | Next E.O. D-368-11 | Next E.O. D-369