Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 6, 1995.
As of Friday, November 29th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsRemarks
HO21141985-1987 Honda Civic SI/CRX SI, Header, Nickle FinishExecutive Order# D-377 dated April 10,1995, is hereby superseded and no longer of any force or effect.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-377-1
  • Executive Order 377-1 / D377-1
  • ARB # D-377-1
  • Executive Order No: D-377-1
  • C.A.R.B. No. D-377-1
  • Resolution D-377-1
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-377-1 PDF

D-377-1 Document:


CARB_D-377-1

                                                          (Page 1 of 2)

                            State of California
                            AIR RESOURCES BOARD


                           EXECUTIVE ORDER D—377—1
                 Relating to Exemption Under Section 27156
                            of the Vehicle Code


                       AUTOMOTIVE SYSTEMS GROUP, INC.
                         LIGHTSPEED EXHAUST HEADERS
Pursuant to the authority vested in the Air Resources Board by Section 27156
of the Vehicle Code; and                                                  j

Pursuant to the authority vested in the undersigned by Section 39515 and
Section 39516 of the Health and Safety Code and Executive Order G~45—9;

IT IS ORDERED AND RESOLVED: That the installation of the Exhaust Headers
made out of #16 gauge 1006 mild steel tube, manufactured by Automotive
Systems Group, Inc. of 6644 San Fernando Road, G@lendale, California 91201,
has been found not to reduce the effectiveness of the applicable vehicle
pollution control system and, therefore, is exempt from the prohibitions of
Section 27156 of the vehicle Code for those applications listed in the
Exhibit, which is attached hereto and incorporated herein.

This Executive Order is valid provided that installation instructions for
the Automotive Systems Group, Inc. Exhaust Headers will not recommend tuning
the vehicle to specifications different from those of the vehicle
manufacturer.

Changes made to the design or operating conditions of the device, as exempt
by the Air Resources Board, which adversely affect the performance of a
vehicle‘s pollution control system shall invalidate this Executive Order.

Marketing of this device using any identification other than that shown in
this Executive Order or marketing of the device for an application other
than those listed in Executive Order shall be prohibited unless prior
approval is obtained from the Air Resources Board.

This Executive Order does not constitute any opinion as to the effect that
the use of this device may have on any warranty either expressed or implied
by the vehicle manufacturer

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
CLAMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED
BENEFITS OF AUTOMOTIVE SYSTEMS GROUP, INC.S$‘ EXHAUST HEADERS.
No claim of any kind, such as "Approved by the Air Resources Board" may be
made with respect to the action taken in any advertising or other oral or
written communication.


AUTOMOTIVE SYSTEMS GROUP, INC.                  EXECUTIVE ORDER D—377—1
LIGHTSPEED EXHAUST HEADERS                      (Page 2 of 2)




Violation of any of the above conditions shall be grounds for revocation
of this order. The order may be revokes only after ten day written notice
of intention to revoke the order, in which period the holder of the order
may request in writing a hearing to contest the proposed revocation. If
a hearing is requested, it shall be held within ten days of receipt of the
hearing that grounds for revocation exist.


Executive Order D—377 dated April 10, 1995, is hereby superseded and no
longer of any force or effect.

The Bureau of Automotive Repair will be notified by copy of this order.

Executed at El Monte, (faHform'a, this   ‘f"      of December 1995.




                                     Mobi¥e Source Division


                                                   EXHIBIT

                                     Lightspeed Exhaust Headers

% P"':_:‘fimr Description/Finish                                          Model Applications
     HO214            Header, Nickle Finish      |85—87 Civic SNUCERX S1
 1   [KO2Z14B         Header, YHT Finisgh        85—87 Civic Si/CRX S1
     HO3COG           Header Ceramic Finish| 85—87 Civic SVCERX S1
     HOZO2N           KHeader, Nickle Finlsh |886—91 Civic/CRX {not HF models)
 2 |HO2O21B           Header, VHTFintsh          8B—91 CMc/CRX {not HF models)
     HOB000           Header Ceramic Finigh|8B8B—91 Civic/CEX (not HF models)
     HO253G           KHeader, Nickle Finish jBG—89 Accord DX, LX        ’
 3 |HO253GB            |Header, VHT Finish        |86—B9 AccordDX, LX
     HOZO3G           Header Ceramic Finish|8G6—89 Accord DX, LX
     HOZ2E4O          Header, Nickis Finish       (86—89 Accord LXi, & SE1
 4 |HOZ640B            |Header, VHT Finlsh        |86—89 Accord LXi, & SEi
   HOB0O37             Header Ceramic Finish|86—89 Accord LXI, & SEi
   HO284S              Header, Nickle Finish 190—93 Accord DX & LX, 90—91 EX Coupe
 5 |H028458            Header, VHT Finish    180—93 Accord DX & LX, 90—91 EX Coupe
     HO3038            Heagder Ceramic Finish}90—93 Accord DX & LX, 90—91 EX Coupe
   02978               Header, Nickis Finish 192—95 Accord EX, SFi, & SE models, 92—95 Prelude S, Si
 6 |H02978B            Header, VHT Finish    (92—95 Accord EX, SE1, & SE models, 92—95 Prelude S. 6i
   HOB0B2              Header Ceramic Finish|92—95 Accord EX, SEi, & SE models, 92—95 Prelude 5. Si
     HO2184            Header, Nickle Finigh      (8G—87 Integra, all               P
 7 |HO21848            Header, VHT Finish         {86—87 Integra, all
   03008               Header Ceramic Finish{86—87 integra, all
   HO2291              Header, Nickle Finish |88—89 Intregra, all
 8 |HO2291B            Header, VHT Finish    £B—89 Intregra, all
   HO3009              Header Ceramic Finish|88—89 Intregra, all
     HO2C25            Header, Nickle Finish      —190—93 Integra, all
 9 |HO2G25RB           Header, VHT Finish         190—98 Integra, all
     HOBO28           Header Ceramic Finish}90—93 Integra, all
    HO2925            Keader, Nickls Finish |92—93 Integra, all
 10 |HO2925B          Header, VHT Finlsh    192—98 integra. all
    HO3029            Header Ceramic Finish(22—93 Integra. all
    HO2973            Header, Nickle Finish |94—95 Integra RS, LS
 11 029738            Header, VHT Finish    194—95 Integra RS, LS
    HOB030            Header Ceramic Finish|94—95 Integra RS, LS
     HOBOB4A        "{Header, Nickle Finigh      |94—95 Integra GSR
 12 |[ROBOBMABE       Haeader, VHT Finish        94—95 Integra GSR
     HO3034           Hesder Ceramic Finish|94—95 Integra GSR
      NOTES:
L. For a given Otyle the parte have the same construction, there are different part numbers to denote finlsh.
2. All Styles are same construction and materials, yet made to fit each diffarent model.




                                                                      information Compiled on 11/15/85, by Dave M. Light



Document Created: 2005-09-01 12:40:21
Document Modified: 2005-09-01 12:40:21

Previous E.O. D-377 | Previous E.O. D-376 | Next E.O. D-377-2 | Next E.O. D-378