Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on January 11, 1996.
As of Monday, July 22nd, 2019 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsRemarks
HO21141985-1987 Honda Civic SI/CRX SI, Header, Nickle FinishExecutive Order# D-377-1 dated Dec. 6, 1995, is hereby superseded and no longer of any force or effect.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-377-2
  • Executive Order 377-2 / D377-2
  • ARB # D-377-2
  • Executive Order No: D-377-2
  • C.A.R.B. No. D-377-2
  • Resolution D-377-2
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-377-2 PDF

D-377-2 Document:



                                                                  (Page 1 of 2)

                                State of California
                               AIR RESOURCES BOARD



                             EXECUTIVE ORDER D—377—2
                   Relating to Exemption Under Section 27156
                              of the Vehicle Code


                          AUTOMOTIVE SYSTEMS GROUP, INC.
                            LIGHTSPEED EXHAUST HEADERS

Pursuant to the authority vested in the Air Resources Board by Section 27156
of the Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and
Section 39516 of the Health and Safety Code and Executive Order G—45—9;

IT IS ORDERED AND RESOLVED:  That the installation of the Exhaust Headers
made out of #16 gauge 1006 mild steel tube, manufactured by Automotive
Systems Group,   Inc.   of 6644 San Fernando Road,    Glendale,   California 91201,
has been found not to reduce the effectiveness of the applicable vehicle
pollution control system and, therefore, is exempt from the prohibitions of
Section 27156 of the vehicle Code for those applications listed in the
Exhibit, which is attached hereto and incorporated herein.~

This Executive Order is valid provided that installation instructions for
the Automotive Systems Group, Inc. Exhaust Headers will not recommend tuning
the vehicle to specifications different from those of the vehicle
manufacturer.

Changes made to the design or operating conditions of the device,          as exempt
by the Air Resources Board, which adversely affect the performance of a
vehicle‘s pollution control system shall invalidate this Executive Order.

Marketing of this device using any identification other than that shown in
this Executive Order or marketing of the device for an application other
than those listed in Executive Order shall be prohibited unless prior
approval is obtained from the Air Resources Board.

This Executive Order does not constitute any opinion as to the effect that
the use of this device may have on any warranty either expressed or implied
by the vehicle manufacturer

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
CLAMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED
BENEFITS OF AUTOMOTIVE SYSTEMS GROUP, INC.S‘ EXHAUST HEADERS.

No claim of any kind, such as "Approved by the Air Resources Board" méy be
made with respect to the action taken in any advertising or other oral or
written communication.


AUTOMOTIVE SYSTEMS GROUP, INC.                        EXECUTIVE ORDER D—377—1
LIGHTSPEED EXHAUST HEADERS                            (Page 2 of 2)




Violation of any of the above conditions shall be grounds for revocation
of this order.  The order may be revokes only after ten day written notice
of intention to revoke the order, in which period the holder of the order
may request in writing a hearing to contest the proposed revocation.  If
a hearing is requested, it shall be held within ten days of receipt of the
hearing that grounds for revocation exist.


Executive Order D—377—1 dated December 6,     1995,   is hereby superseded and no
longer of any force or effect.

The Bureau of Automotive Repair will be notlfied by copy of this order.

Executed at El Monte,   California,   this //day of January 1996.




                                  \VLM{M
                                          . Summerfield
                                      1stant Division Chief
                                         Moblle Source Division


                                                 EXHIBIT

                                  Lightspeed Exhaust Headers



 o      |o:
u:? Pl;?"::fupnigjr      Description/Finish                              Model Applications
     HOZ114            Header, Nickle Finish      |85—87 Civic Si/CRX Si
 1   [HOZ14B           Header, YHT Finish     85—87 Civic SUCRX Si
     HOBO06            Header, Ceramic FinisH 85—87 Civic SVCRX Si
     HO2921            Header, Nickle Finish }88—91 Civic/CRX {not HF models)
 2 |HO2921B            Header, YHT Finish         |88—91 Civic/CRX (not HF models)
     HOBO00            Header, Ceramic Finis] 88—91 Civic/CRX (not HF models}
 3 03005               Header,   Ceramic Finish 92—95 Civic DX, EX, LX, Si and del Sol S, Si
   030058              Header,   VHT Finish     {92—95 Civic DX, EX, LX, Si and del Sol S, Si
   HO2536              Header,   Nickle Finish 186—89 Accord DX, LX
 4 |HO253GB            Header,   VHT Finish     |86—89 Accord DX, LX
     HOBO36            ____|Header, Ceramic Finist| B6—89 Accord DX, LX
     HO2640            Header, Nickle Finish      |186—89 Accord LXi, & SEi
 5   1HO26408          Header, YHT Finish         86—89 Accord LXi, & SEi
     HOBO37            Header, Ceramic Finish86—89 Accord LXi, & SEi
     HO2845            Header, Nickle Finish      190—93 Accord DX & LX, 90—91 EX Coupe
 6 |HO2B45B            Header, YHT Finish     920—95 Accord DX & LX, 90—91 EX Coupe
   HO3O038             Header, Ceramic Finish 90—938 Accord DX & LX, 90—91 EX Coupe
   HO2978              Header, Nickle Finish |92—93 Accord EX, SEi, & SE models, 92—95 Prelude S, Si
 7 |HO2978B            Header, YHT Finish     92—93 Accord EX, SEi, & SE models, 92—95 Prelude S, Si
   HOZO32              Header, Ceramic Finis] 92—93 Accord EX, SEi, & SE models, 92—95 Prelude S, Si
   HOZ2184             Header, Nickle Finish 186—87 Integra, all
 & |HOZI84B            Header, VHT Finish     86—87 Integra, all
     HOB008            Header, Ceramic Finish 86—87 Integra, all
     HO2291            Header, Nickle Finish      |88—89 Intregra, all
 9   |HO2291B          Header, VHT Finish         88—89 Intregra, all
     HO3009            Header, Ceramic Finis]88—89 Intregra, all
    HO2C25             Header, Nickle Finish      (90—93 Integra, all
 10 |HO2G25B           Header, YHT Finish         |90—93 Integra, all
     HO3O028           ___|Header, Ceramic FinisH90—93 Integra, all
   HO2925              Header, Nickle Finish |92—93 Integra, all
 1 |HO29258B           Header, VHT Finish    |92—95 Integra, all
   HOS029              Header, Ceramic Finish92—93 Integra, all
     HO2973            Header, Nickle Finish      |94—95 Integra RS, LS
 12 |HO29738B          Header, YHT Finish     |94—95 Integra RS, LS
    HOB0O30            Header, Ceramic Finish 94—95 Integra RS, LS
     HOBOB4A           Header, Nickle Finish      194—95 Integra GSR
13| HO3034B            |Header, VHT Finish        |94—95 Integra GSR
     HOBO34            Header, Ceramic Finish 94—95 Integra GSR
     NOTES:
1. For a given Style the parts have the same construction, there are different part numbers to denote finlsh.
2. All Styles are same construction and materials, yet made to fit each different model,



                                                                       Information Compiled on 12/19/95, by Dave M. Light



Document Created: 2005-09-01 12:44:52
Document Modified: 2005-09-01 12:44:52

Previous E.O. D-377-1 | Previous E.O. D-376 | Next E.O. D-377-3 | Next E.O. D-378