Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on September 19, 2011.
As of Sunday, September 15th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
See PDFSee PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-436-16
  • Executive Order 436-16 / D436-16
  • ARB # D-436-16
  • Executive Order No: D-436-16
  • C.A.R.B. No. D-436-16
  • Resolution D-436-16
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-436-16 PDF

D-436-16 Document:


CARB_D-436-16

                                          State of California
                                      AIR RESOURCES BOARD _
                                     EXECUTIVE ORDER D—436—16

                               Relating to Exemptions Under Section 27156
                             >            of the California Vehicle Code

                                       Steve Millen Sportparts, Inc.
                                    . Stillen Cold Air Intake System

Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle
Code; and

Pursuant to the authority vested in the underSIgned by Section 39515 and Section 39516 of the
Health and Safety Code and Executive Order G02—003;

IT IS ORDERED AND RESOLVED: That the lnstallatlon of the Stillen Cold Air Intake System,
manufactured and marketed by Steve Millen Sportparts, Inc. 3176 Airway Avenue, Costa Mesa,
California 92626, has been found not to reduce the effectiveness of the applicable vehicle
pollution control systems and, therefore, is exempt from the prohibitions of Section 27156 of the
Vehicle Code for the following Nissan/Infiniti vehicle applications listed in Exhibit A.

This Executive Order is valid provided that the installation instructions for the Stillen Cold Air
Intake System will not recommend tuning the vehicle to specifications different from those
submitted by the device manufacturer.                                                            '

Changes made to the design or operating conditions of the Stillen Cold Air Intake System, as
exempt by the Air Resources Board, which adversely affect the performance of the vehicle‘s
pollution control system shall invalidate this Executive Order.

This\ Executive Order shall not apply to any Stillen Cold Air Intake System advertised, offered for
sale, sold with, or installed on a new motor vehicle prlor to or concurrent with transfer to an
ultimate purchaser.

Marketing of the Stillen    Cold Air Intake System using any identification other than that shown in
this Executive Order or     marketing of the Stillen Cold Air Intake System for an application other
than those listed in this   Executive Order shall be prohibited unless prior approvalis obtained
from the Air Resources      Board.

This Executive Order does not constitute a‘ny opinion as to the effect the use of the Stillen Cold
Air Intake System may have on any warranty either expressed or implied by the vehicle
manufacturer.


This Executive Order is granted based on submitted emissions test data generated on a 2010
model year Nissan 370Z with a 3.7 liter engine (ANSXVO3.7GAA, LEV II ULEV, PC). Testing
consisted of Cold—Start CVS—75 Federal Test Procedure, Supplemental Federal Test Procedure
(USO06), and an examination of the On—Board Diagnostic II (OBD II) system. Emission levels of
the 370Z with the Stillen Cold Air Intake System, part number 402852 installed, met the
vehicle‘s applicable emission standards. The following test results are in grams per mile with
the deterioration factors applied:

                         CVS—75                                 USO6
                  NMOG CO      NOx        HCHO           NMHC+NOx    CO
Standards 50k     0.040 1.7   0.05       0.008             0.14      8.0
Device            0.021 0.4   0.03       0.000             0.07      1.2

Examination of the OBD I! system showed the Stillen Cold Air Intake System does not affect
OBD i1 system operation.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD
OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY
ALLEGED BENEFITS OF THE STILLEN COLD AIR INTAKE SYSTEM.

No claim of any kind, such as "Approved by the Air Resources Board", may be made with
respect to the action taken herein in any advertising or other oral or written communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The order
may be revoked only after a ten—day written notice of intention to revoke the order, in which
period the holder of the order may request in writing a hearing to contest the proposed
revocation. If a hearing is requested, it shall be held within ten days of receipt of the request
and the order may not be revoked until a determination is made after the hearing that grounds
for revocation exist.

Executed at El Monte, California, this      f/é     day of September 2011.




                                  CAnnette Hebert, Chief
                                    Mobile Source Operations Division




   STEVE MILLEN SPORTPARTS, INC. — STILLEN COLD AIR INTAKE SYSTEM — D—436—16


                                          Exhibit A

   Part No. Application

   402837     2007 to 2008 350Z (3.5L)
   402838      2007 to 2008 G35 (Sedan), 2008 EX—35 (3.5L) _
   402841      2007 to 2009 Altima (3.5L Sedan), 2008 to 2009 Altima (3.5L Coupe)
   402842      2007 to 2008 350Z (3.5L)
   402843      2007 to 2008 G35 (Sedan), 08 EX—35 (3.5L)
   402846      2008 to 2009 G37 (Coupe) (3.7L)
   402847      2009 G37 (Sedan) (3.7L)
   402849      2008 to 2009 G35 (Sedan) (3.5L)
   402851     2009 370Z (3.7L)
   402852      2009 to 2010 370Z , 2007 to 2008 350Z (3.7L&3.5L)
   402974      2009 to 2010 Maxima (3.5L)
   402957:   . 2002 to 2003 Maxima (3.5L)

                        STILLEN Cold Air Intake kit description
                          )
Part # 402837 and 402838
The STILLEN Generation 1 intake system consists of 2 urethane air boxes, 2 K&N air
filters and 2 short intake tubes with provisions for mounting the mass air flow sensor. The
system retains the stock upper intake tubes while replacing the stock air boxes.

Part # 402842, 402843, and 402851
The STILLEN Generation 2 intake system Consists of 2 urethane air boxes, 2 K&N air
filters and 2 longer intake tubes with provisions for mass air flow sensor as well as PCV
connections. This system replaces the stock upper mtake tubes as well as the stock air
boxes.

Part # 402846, 402847, 402849, and 402852
The STILLEN Generation 3 intake system consists of 2 K&N air filters, 2 upper intake
tubes with provisions for mass air flow sensor as well as PCV connections and 2 lower
intake tubes that route out in front of the radiator to provide colder air intake from behind
the vehicle fascia. This system replaces the stock upper intake tubes as well as the stock
air boxes.

Part # 402841, 402974, and 402957
The Altima—and Maxima systems consist of a short intake tube with provisions for mass
air flow sensor, a velocity ring and a K&N air filter. These systems replace the stock air
box.



Document Created: 2011-11-02 13:05:40
Document Modified: 2011-11-02 13:05:40

Previous E.O. D-436-15 | Previous E.O. D-435 | Next E.O. D-436-17 | Next E.O. D-437