Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on April 14, 2016.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
75-50451992-2000 6.5L CHEV./GMC: 1500/2500/3500 Diesel Trucks

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-590-10
  • Executive Order 590-10 / D590-10
  • ARB # D-590-10
  • Executive Order No: D-590-10
  • C.A.R.B. No. D-590-10
  • Resolution D-590-10
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-590-10 PDF

D-590-10 Document:


CARB_D-590-10

                                    State of California
                                AIR RESOURCES BOARD

                              EXECUTIVE ORDER D-590-1 0

                       Relating to Exemptions Under Section 27156
                               of the California Vehicle Code

                                        S&B Filters
                                     Cold Air Intake Kit

 Pursuant to the authority vested in the Air Resources Board by Section 27156 of the
 Vehicle Code; and

 Pursuant to the authority vested in the undersigned by Section 39515 and SeGtion
 39516 of the Health and Safety Code and Executive Order G-14-012;

 IT IS ORDERED AND RESOLVED: That the installation of the Cold Air Intake Kit,
 produced and marketed by S&B Filters of 15461 Slover Avenue, Fontana, California
 92337, has been found not to reduce the effectiveness of the applicable vehicle
 pollution control systems and , therefore, is exempt from the prohibitions of Section
 27156 of the Vehicle Code for the vehicles listed in Exhibit A.

 The Cold Air Intake Kit includes the following main components: An open-element air
 filter (either an oiled reusable or a dry disposable), heat shield (as applicable), intake
 system tubing, crankcase ventilation hose (as applicable, which may be silicone, and a
 color other than black), assorted brackets, and hardware.

 This Executive Order is valid provided that the installation instructions for the Cold Air
 Intake Kit will not recommend tuning the vehicle to specifications different from those of
 the vehicle manufacturer.

 Changes made to the design or operating conditions of the Cold Air Intake Kit, as ·
 exempt by the Air Resources Board , which adversely affect the performance of the
 vehicle's pollution control system shall invalidate this Executive Order.

 This Executive Order shall not apply to any Cold Air Intake Kit advertised , offered for
 sale, sold with, or installed on a new motor vehicle prior to or concurrent with transfer to
 an ultimate purchaser.

  Marketing of the Cold A ir Intake Kit using any identification other than that shown in this
  Executive Order or marketing of the Cold Air Intake Kit for an application other than those
  listed in this Executive Order shall be prohibited unless prior approval is obtained from the
. Air Resources Board.


                                              -2-

This Executive Order does not constitute any opinion as to the effect the use of the Cold Air
Intake Kit units may have on any warranty either expressed or implied by the vehicle
manufacturer.

This Executive Order is granted based on emission tests, in the modified configuration ,
using the Cold-Start Federal Test Procedure and an examination of the On-Board
Diagnostic II (OBD II) system . A 2015 GM 6.6L Silverado 2500 (FGMXD06.6355, LEV-II
ULEV) was used for the evaluation of the Cold Air Intake Kit. Results from emissions
testing conducted by S&B Filters, Inc. with the Cold Air Intake Kit, are shown below (in
grams per mile):

                            2015 GM 6.6L Silverado 2500-4FWD

FTP                 120k        NMHC           co        NOx        PM
               Emission Level   0.109          0.10      0.12      0.013
          (w. OF & OAF applied)
                    STD         0.143          6.4       0.2        0.06

The emission test results, in the modified configuration, were below the applicable
certification standards. Examination of the OBD II system showed the Cold Air Intake Kit
did not affect OBD II operation.

If evidence provides the ARB with reason to suspect that the Cold Air Intake Kit will affect
the durability of emission control systems , S&B Filters shall be required to submit durability
data to show that the durability of vehicle emission control systems are not affected and/or
that the add-on or modified part demonstrates adequate durability.

The ARB reserves the right in the future to review this Executive Order and the exemption
provided herein to assure that the exempted add-on or modified part continues to meet the
standards and procedures of Title 13, California Code of Regulations, Section 2222 , et seq .

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI-POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF S&B FILTERS' COLD
AIR INTAKE KIT.

No claim of any kind, such as "Approved by the Air Resources Board", may be made with
respect to the action taken herein in any advertising or other oral or written communication.




                  S&B FILTERS, INC. COLD AIR INTAKE KIT- D-590-10


                                               -3-

Violation of any of the above conditions shall be grounds for revocation of this order. The
order may be revoked only after a ten-day written notice of intention to revoke the order, in
which period the holder of the order may request in writing a hearing to contest the
proposed revocation . If a hearing is requested , it shall be held within ten days of receipt of
the request and the order may not be revoked until a determination is made after the
hearing that grounds for revocation exist.

Executed at El Monte, California , th is     / t-f    day of Ap ri l 2016.




                 Annette Hebert, Chief
                 Emissions Compliance, Automotive Regulations and Science Division




                   S&B FILTERS, INC. COLD AIR INTAKE KIT- D-590-10


                                                                         (Page 1 of 1)



                           ATTACHMENT A



 . PIN      Model                                                            Engine
                         Make                   Models
            Years                                                         Displacement

 75-5045
           1992-2000   CHEV./GMC     1500/2500/3500 Diesel Trucks              6.5L
75-5045D

 75-5065                           Silverado/Sierra 2500 & 3500 Diesel
           2013-2014   CHEV./GMC                                               6.6L
75-5065D                                          Trucks

 75-5075                           Silverado/Sierra 2500 & 3500 Diesel
           2015-2016   CHEV./GMC                                               6.6L
75-5075D                                          Trucks




               S&B FILTERS , INC. COLD AIR INTAKE KITS- D-590-10



Document Created: 2016-04-21 13:19:52
Document Modified: 2016-04-21 13:19:52

Previous E.O. D-590-9 | Previous E.O. D-589 | Next E.O. D-590-11 | Next E.O. D-591