Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on May 27, 2010.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
562044952010 6.0 liter GM G2500 Express vanThe fuel fill opening is relocated; fuel transfer pipe and vent tube are extended; fuel tank is lowered 1.5 inches.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-675
  • Executive Order 675 / D675
  • ARB # D-675
  • Executive Order No: D-675
  • C.A.R.B. No. D-675
  • Resolution D-675
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-675 PDF

D-675 Document:


CARB_D-675

                                     State of California
                                AIR RESOURCES BOARD

                               EXECUTIVE ORDER D—675

                               Relating to Exemptions under
                            Section 27156 of the Vehicle Code

                                Roadtrek Motorhomes, Inc.
                                  Fuel Fill Pipe Assembly

Pursuant to the authority vested in the Air Resources Board by Section 27156 of the
Vehicle Code; and

Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the
Health and Safety Code and Executive Order G—02—003;

IT IS ORDERED AND RESOLVED: That installation of the fuel fill pipe assembly,
manufactured by Roadtrek Motorhomes, Inc. of 100 Shirley Avenue, Kitchener, Ontario,
Canada N2B—2E1, has been found not to reduce the effectiveness of the applicable
vehicle pollution control system, and therefore, the fuel fill pipe assembly is exempt from
the prohibitions in Section 27156 of the Vehicle Code for use on the following vehicles:

        Device P/N           Vehicle Model
        56204495             2010 model—year 6.0 liter GM G2500 Express van
        56204493             2010 model—year 6.0 liter GM 63500 Express van

The fuel fill pipe assembly includes longer fuel transfer pipe and vent tube. These parts
meet original equipment manufacturer specifications. In the modification, the original
equipment manufacturer fuel tank is lowered approximately 1.5 inches.

This exemption is based on engineering evaluation and previous On—Board Diagnostic II
system testing Home & Park Motorhomes conducted with the fuel fill pipe assembly.

This Executive Order is valid provided that installation instructions for the fuel fill pipe
assembly do not recommend tuning the vehicles to specifications different from those of
the vehicle manufacturer.

Changes made to the design or operating conditions of the fuel fill pipe assembly, as
exempt by the ARB, which adversely affect the performance of the vehicle‘s pollution
control system, shall invalidate this Executive Order.

Marketing of the fuel fill pipe assembly using identification other than that shown in this
Executive Order or for an application other than that listed in this Executive Order shall
be prohibited unless prior approval is obtained from the ARB.

Exemption of the fuel fill pipe assembly shall not be construed as an exemption to sell,
offer for saile, or advertise any component of the assembly as individual devices.


                                             2.


This Executive Order shall not apply to any fuel fill pipe assembly advertised, offered for
sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an
ultimate purchaser.

This Executive Order does not constitute any opinion as to the effect the use of the fuel
fill pipe assembly may have on any warranty either expressed or implied by the vehicle
manufacturer.

No claim of any kind, such as "Approved by the Air Resources Board," may be made
with respect to the action taken herein in any advertising or other oral or written
communication.                                                               «

In addition to the foregoing, the ARB reserves the right in the future to review this
Executive Order and the exemption provided herein to assure that the exempted add—on
or modified part continues to meet the standards and procedures of California Code of
Regulations, Title 13, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF ROADTREK
MOTORHOMES, INC.‘S FUEL FILL PIPE ASSEMBLY.

Violation of any of the above conditions shall be grounds for revocation of this Executive
Order. The Executive Order may be revoked only after a ten—day written notice of
intention to revoke the Executive Order, in which period the holder of the Executive
Order may request in writing a hearing to contest the proposed revocation. If a hearing
is requested, it shall be held within ten days of receipt of the request, and the Executive
Order may not be revoked until a determination is made after a hearing that grounds for
revocation exist.

Executed at El Monte, California, this    ) ‘fl}day of May 2010.



                                 9:       %/fibw

                                    Annette Hebert, Chief
                                  %bile Source Operations Division




      ROADTREK MOTORKHOMES, INC. — FUEL FILL PIPE ASSEMLBY ~—D—675



Document Created: 2010-06-29 11:34:32
Document Modified: 2010-06-29 11:34:32

| Previous E.O. D-674 | Next E.O. D-675-1 | Next E.O. D-676