Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on February 17, 2017.
As of Sunday, December 22nd, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part Number
see pdf

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-740-3
  • Executive Order 740-3 / D740-3
  • ARB # D-740-3
  • Executive Order No: D-740-3
  • C.A.R.B. No. D-740-3
  • Resolution D-740-3
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-740-3 PDF

D-740-3 Document:

CARB_D-740-3

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—740—3 Relating to Exemptions Under Section 27156 of the California Vehicle Code Dorman Products, Inc. EGR Cooler, Part Nos. 904—273 and 904—274 Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G—14—012; IT IS ORDERED AND RESOLVED: That the installation of the EGR Cooler, manufactured and marketed by Dorman Products, Inc., 3400 Wainut Street, Colmar, Pennsylvania 18915, has been found not to reduce the effectiveness of the applicable vehicle pollution control systems and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for 2008 to 2010 model year Ford 6.4L. F—250/350/450/550 Super Duty Trucks. The EGR Cooler is a direct fit stainless steel cooler that uses a series of stainless steel interior tubes for EGR cooling. The modified part requires no modifications for installation and bolts to stock connecting ports without any modifications to the stock connecting ports. The EGR Cooler has no mechanical or electrical user adjustments. No changes are made to any component of the stock engine for installation, including engine calibration. This Executive Order is valid provided that the installation instructions for the EGR Cooler will not recommend tuning the vehicle to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the EGR Cooler as exempt by the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the EGR Cooler using any identification other than that shown in this Executive Order or marketing of the EGR Cooler for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. This Executive Order does not constitute any opinion as to the effect the use of the EGR Cooler may have on any warranty either expressed or implied by the vehicle manufacturer.

4. This Executive Order is granted based on an engineering evaluation and information supplied by Dorman Products, Inc. on the EGR Cooler. Comparisons made between the stock and modified part demonstrated similarity in material type, port size, and design. Dorman also provided technical data which compared the cooler effectiveness to stock. Bench test data, on four unique test runs, demonstrated similar results for both parts when compared to stock. The Air Resources Board reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of Title 13, California Code of Regulations, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE EGR COOLER. No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a ten—day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination is made after the hearing that grounds for revocation exist. Executed at El Monte, California, this /7 day of February 2017. —“—/‘ // 7/ tell Z—({—Annette Hebert, Chief l Emissions Compliance, Automotive Regulations and Science Division DORMAN PRODUCTS, INC. — EGR COOLER —D—740—3


Document Created: 2017-07-14 11:43:17
Document Modified: 2017-07-14 11:43:17

Previous E.O. D-740-2 | Previous E.O. D-739 | Next E.O. D-740-4 | Next E.O. D-741