Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on February 25, 2015.
As of Thursday, December 5th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part Number
See PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-741
  • Executive Order 741 / D741
  • ARB # D-741
  • Executive Order No: D-741
  • C.A.R.B. No. D-741
  • Resolution D-741
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-741 PDF

D-741 Document:


CARB_D-741

                                   State of California
                               AIR RESOURCES BOARD

                              EXECUTIVE ORDER D-741

                      Relating to Exemptions Under Section 27156
                                 of the California Vehicle Code

                              Senior Operations, LLC
             EGR Cooler Core, Part Nos. 510-110-8002 and 510-110-8003


Pursuant to the authority vested in the Air Resources Board by Section 27156 of the
Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and Section
39516 of the Health and Safety Code and Executive Order G-14-012;

IT IS ORDERED AND RESOLVED: That the installation of the EGR Cooler Core,
manufactured and marketed by·Senior Operations, LLC, 300 East Devon Avenue,
Bartlett, Illinois 60103, has been found not to reduce the effectiveness of the applicable
vehiCle pollution control systems and, therefore, is exempt from the prohibitions of
Section 27156 of the Vehicle Code for 2010 to 2014 model year vehicles equipped with
either the Navistar 11 Lor 13L diesel engine .

The EGR Cooler Core, part numbers 510-110-8002 and 510-110-8003, are a direct fit
stainless steel EGR cooler core that uses a series of stainless steel interior tubes for
EGR cooling, the stock EGR cooler housing is retained on part number
510-110-8002, part number 510-110-8003 includes a new EGR cooler housing,
identical to stock. The modified part requires no modifications for installation and
bolts to stock connecting ports without any modifications to the stock connecting
ports. The EGR Cooler Core has no mechanical or electrical user adjustments.
No changes are made to any component of the stock engine for installation,
including engine calibration.

This Executive Order is valid provided that the installation instructions for the EGR
Cooler Core will not recommend tuning the vehicle to specifications different from those
of the vehicle manufacturer.

Changes made to the design or operating conditions of the EGR Cooler Core as exempt
by the Air Resources Board , which adversely affect the performance of the vehicle's
pollution control system shall invalidate this Executive Order.

Marketing of the EGR Cooler Core using any identification other than that shown in this
Executive Order or marketing of the EGR Cooler Core for an application other than
those listed in this Executive Order shall be prohibited unless prior approval is obtained
from the Air Resources Board.


                                            —2—



This Executive Order does not constitute any opinion as to the effect the use of the
EGR Cooler Core may have on any warranty either expressed or implied by the vehicle
manufacturer,

This Executive Order is granted based on an engineering evaluation and information
supplied by Senior Operations, LLC on the EGR Cooler Core. Comparisons made
between the stock and modified part demonstrated similarities in design and function.
Modification has no effect on EGR cooler port or volume size. Senior Operations, LLC
also provided technical data which compared the cooler input and output temperatures.
Submitted graphical data, demonstrates comparable results between the modified and
stock part.                                             ’

The Air Resources Board reserves the right in the future to review this Executive Order
and the exemption provided herein to assure that the exempted add—on or modified part
continues to meet the standards and procedures of Title 13, California Code of
Requlations, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE
AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
ANTIPOLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE EGR COOLER
CORE.

No claim of any kind, such as "Approved by the Air Resources Board", may be made
with respect to the action taken herein in any advertising or other oral or written
communication.

Violation of any of the above conditions shall be grounds for revocation of this order.
The order may be revoked only after a ten—day written notice of intention to revoke the
order, in which period the holder of the order may request in writing a hearing to contest
the proposed revocation. If a hearing is requested, it shall be held within ten days of
receipt of the request and the order may not be revoked until a determination is made
after the hearing that grounds for revocation exist,

Executed at El Monte, California, this    2-5          _ day of February 2015.



             @:fi&%*
                Annette Hebert, Chief
                Emissions Compliance, Automotive Regulations and Science Division




            SENIOR OPERATIONS, LLC. — EGR COOLER CORE — D—741



Document Created: 2015-02-26 15:58:54
Document Modified: 2015-02-26 15:58:54

| Previous E.O. D-740 | Next E.O. D-741-1 | Next E.O. D-742