Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 23, 1998.
As of Wednesday, November 27th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
1603 & 16161984 to 1991 Harley Davidson motorcycles
1660, 1661, 1670, & 16711984 to 1998 Harley Davidson motorcycles

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-215-38
  • Executive Order 215-38 / D215-38
  • ARB # D-215-38
  • Executive Order No: D-215-38
  • C.A.R.B. No. D-215-38
  • Resolution D-215-38
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-215-38 PDF

D-215-38 Document:

CARB_D-215-38

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—215—38 Relating to Exemptions Under Section 27156 of the Vehicle Code EDELBROCK CORPORATION Harley Davidson Cylinder Heads and Intake Manifolds Pursuant to the authority vested in the Air Resources Board by Section 27156 ofthe Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED:. That the installation of the Harley Davidson Cylinder Heads and Intake Manifolds, manufactured and marketed as a kit by the Edelbrock Corporation, 2700 California Street, Torrance, California 90509—2936 has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for installation on the following 1984 to 1998 Harley Davidson motorcycles equipped with a 1338 cc engine. Part No. Model—Year Description 1603, 1616 1984—91 Cylinder Heads 1602, 1615 1992—98 Cylinder Heads 1660, 1661, 1670, 1671 1984—98 Intake This Executive Order is granted based on an engineering evaluation on the impactof the Harley Davidson Cylinder Heads and Intake Manifolds on exhaust emissions. This Executive Order is valid provided that the installation instructions for the Harley Davidson Cylinder Heads and Intake Manifolds will not recommend tuning the vehicle to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the Harley Davidson Cylinder Heads and Intake Manifolds, as exempt by the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the Harley Davidson Cylinder Heads and Intake Manifolds using any identification other than that shown in this Executive Order or marketing of the Harley Davidson Cylinder Heads and Intake Manifolds for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of the Harley Davidson Cylinder Heads and Intake Manifolds shall not be construed as exemption to sell, offer for sale, or advertise any component of the kit as an individual device. This Executive Order does not constitute any opinion as to the effect the use of the Harley Davidson Cylinder Heads and Intake Manifolds may have on any warranty either expressed or implied by the vehicle manufacturer.

EDELBROCK CORPORATION Executive Order D—215—38 Harley Davidson Cylinder Heads and Intake Manifolds (Page 2 of 2) THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE EDELBROCK CORPORATION‘S HARLEY DAVIDSON CYLINDER HEADS AND INTAKE MANIFOLDS. No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a ten—day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. Executive Order D—215—20, dated June 1995, is superseded and of no further force and effect. Executed at E1 Monte, California, this Prigg day of December 1998. Gotk R. B. purnmerfield, Chief e Source Operations Division


Document Created: 2005-09-01 12:41:20
Document Modified: 2005-09-01 12:41:20

Previous E.O. D-215-37 | Previous E.O. D-214 | Next E.O. D-215-39 | Next E.O. D-216