Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on March 20, 1997.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
020-01-09284 020-01-09285 020-011987-1997 Ford F250/ 350 heavy duty pick up with 7.3L diesel engines

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-12
  • Executive Order 288-12 / D288-12
  • ARB # D-288-12
  • Executive Order No: D-288-12
  • C.A.R.B. No. D-288-12
  • Resolution D-288-12
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-12 PDF

D-288-12 Document:

CARB_D-288-12

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—288—12 Relating to Exemptions Under Section 27156 of the Vehicle Code TRANSFER FLOW, INC. REPLACEMENT FILLNECK KIT Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That the installation of the Replacement Fillneck Kit, manufactured by Transfer Flow, Inc. of 1444 Fortress Street, Chico, California 95926, has been found not to reduce the effectiveness |of the applicable vehicle pollution control system, and therefore, the Replacement Fillneck Kit is exempt from the prohibitions of Section 27156 of the Vehicle Code for installation on the vehicles listed in Exhibit A which is attached hereto and incorporated herein. This Executive Order is valid provided that installation instructions for the Replacement Fillneck Kit not recommend tuning the vehicle to specifications different from those submitted by the manufacturer. Changes made to the design or operating conditions of the Replacement Fillneck Kit, as exempt by the ARB, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the Replacement Fillneck Kit using an identification other than that shown in this Executive Order or for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. In addition to the foregoing, the ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of Title 13, California Code of Reqgulations, Section 2222 et seq. This Executive Order does not constitute any opinion as to the effect the use of the Replacement Fillneck Kit may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TRANSFER FLOW, INC.‘S REPLACEMENT FILLNECK KIT. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten— day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held

TRANSFER FLOW, INC. EXECUTIVE ORDER D—288~12 REPLACEMENT FILLNECK KIT (Page 2 of 2) within ten days of receipt of the request and the Executive Order may not be revoked until a determination after the hearing that grounds for revocation exist. Executed at El Monte, California, thiscééz__da

EXHIBIT A E. O. D—288—12 VEHICLE ENGINE MODEL KIT NUMBER APPLICATION MAKE SIZLE YEAR NUMBER DESCRIPTION Ford PU 7.3 L 1987—1997 020—01—09292 Front tank/std. bed F250/350 HD Diesel 1987—1997 020—01—09284 Front tank/dual bed ~ Fora PU 7.3 L 1987—1997 020—01—09291 Rear tank/std. bed F250/350 HD Diesel 1987—1997 020—01—09285 Rear tank/dual bed ~ Ford PU 5.8 L 1987—1997 020—01—06939 Front tank/std. bed F250/350 HD 7.5 L 1987—1997 020—01—06940 Front tank/dual bed — Ford PU 1987—1997 020—01—06941 Rear tank/std. bed F250/350 HD 1987—1997 020—01—06942 Rear tank/dual bed Ford PU 1987—1997 020—01—08271 Front tank/std. bed Cab Chassis 1987—1997 020—01—09615 Front tank/dual bed 1987—1997 020—01—08272 Front tank/std. bed— 1987—1997 020—01—09616 Front tank/dual bed Ford PU 1987—1997 020—01—08273 Front tank/std. bed Cab Chassis 1987—1997 020—01—09617 Front tank/dual bed 1987—1997 020—01—08274 Front tank/std. bed— 1987—1997 020—01—09618 Front tank/dual bed Ford PU 7.3 L 1987—1997 020—01—08271 Front tank/std. bed Cab Chassis Diesel 1987—1997 020—01—08767 Front tank/dual bed 1987—1997 020—01—08290 Front tank/std. bed 1987—1997 020—01—08768 Front tank/dual bed Ford PU 1987—1997 020—01—08273 Front tank/std. bed ui o 1 un 2 Cab Chassis 1987—1997 020—01—09619 Front tank/dual bed _ 1987—1997 020—01—08291 Front tank/std. bed ~ 1987—1997 020—01—09620 Front tank/dual bed GMC PU 1990—1997 020—01—08275 Front & rear tank (diesel) mcng NB J O U o 0 o y i in 0 2 9 2 C1500/2500/ w/ formed fillneck 3500 1990—1997 020—01—09624 Front & rear tank (diesel) * K1500/2500/ w/ straight fillneck ++ 3500 1990—1997 020—01—08276 Front & rear tank w/ formed o 2 + Cab Chassis fillneck > C3500 1990—1997 020—01—09625 Front & rear tank w/ straight [ 9 K1500/2500/ fillneck 3500


Document Created: 2005-09-01 12:40:49
Document Modified: 2005-09-01 12:40:49

Previous E.O. D-288-11 | Previous E.O. D-287 | Next E.O. D-288-13 | Next E.O. D-289