Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on March 20, 1996.
As of Wednesday, January 1st, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
020-01-9289 020-01-9290 020-01-91983-1986 Ford F150/ 250/ 350 pick up with 7.3L diesel engines

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-6
  • Executive Order 288-6 / D288-6
  • ARB # D-288-6
  • Executive Order No: D-288-6
  • C.A.R.B. No. D-288-6
  • Resolution D-288-6
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-6 PDF

D-288-6 Document:

CARB_D-288-6

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—288—6 Relating to Exemptions Under Section 27156 of the Vehicle Code _ TRANSFER FLOW, INC. REPLACEMENT FILLNECK KIT Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—9; IT IS ORDERED AND RESOLVED: That the installation of the Replacement Fillneck Kit, manufactured by Transfer Flow, Inc. of 1444 Fortress Street, Chico, California 95926, has been found not to reduce the effectiveness of the applicable vehicle pollution control system, and therefore, the Replacement Fillneck Kit is exempt from the prohibitions of Section 27156 of the Vehicle Code for installation on the vehicles listed in Exhibit A which > is attached hereto and incorporated herein. This Executive Order is valid provided that installation instructions for the Replacement Fillneck Kit not recommend tuning the vehicle to specifications different from those submitted by Transfer Flow, Inc. Changes made to the design or operating conditions of the Replacement Fillneck Kit, as exempt by the ARB, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. . Marketing of the Replacement Fillneck Kit using an identification other than that shown in this Executive Order or for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. In addition to the foregoing, the ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of Title 13, California Code of Regulations, Section 2222 et seq. This Executive Order does not constitute any opinion as to the effect the use of the Replacement Fillneck Kit may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TRANSFER FLOW, INC.‘S REPLACEMENT FILLNECK KIT.

TRANSFER FLOW, INC. EXECUTIVE ORDER D—288—6 REPLACEMENT FILLNECK KIT (Page 2 of 2) No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten— day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the Executive Order may not be revoked until a determination after the hearing that grounds for revocation exist. 75}( Executed at El Monte, CaTifornia, this C;ZCZ day 9 Assi t Divisionf Chief Mobile Source Division

EXHIBIT A E.0. D—288—6 VEHICLE ENGINE MODEL KIT APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford P/U 7.3 L 1983 —86 020—01—9293 Front tank/std. bed F150, F250, F350 Diesel 1987 —96 020—01—9292 1983 —86 020—01—9294 Front tank/dual bed 1987 —96 020-0}-9284 Ford P/U + 7.3 L 1983 —86 020—01—9290 Rear tank/std. bed F150, F250, F350 Diesel 1987—96 020—01—9291 1983 —86 020—01—9289 Rear tank/dual bed 1987 —96 020—01—9285 Ford P/U 4.9 L 1983 —86 020—01—8206 Front tank/std. bed F150, F250, F350 5.0 L 1987 —96 020—01—6939 5.8 L 1983 —86 020—01—8207 Front tank/dual bed 7.5 L 1987—96 020—01—6940 Ford P/U 4.9 L 1983 —86 020—01—8208 Rear tank/std. bed F150, F250, F350 5.0 L 1987—96 020—01—6941 5.8 L 1983—86 020—01—8209 Rear tank/dual bed 7.5 L 1987—96 020—01—6942 ' Ford P/U 7.3 L 1987—96 020—01—8271 Front tank/std. bed F—Super Duty Diesel 020—01—9615 Front tank/dual bed 1987—96 ©020—01—8272 Rear tank/std. bed 020—01—9616 Rear tank/dual bed Ford P/U 7.5 L 1987 —96 020—01—8273 Front tank/std. bed F—Super Duty 1987—96 020—01—9617 Front tank/dual bed 1987 —96 020—01—8274 Rear tank/std. bed 1987—96 020—01—9618 Rear tank/dual bed Ford Cab Chassis 7.3 L 1987 —96 020—01—8271 Front tank/std. bed F—Super Duty Diesel 1987—96 020—01—8767 Front tank/dual bed 1987—96 020—01—8290 Rear tank/std. bed 1987—96 020—01—8768 Rear tank/dual bed Ford Cab Chassis 7.5 L 1987—96 020—01—8273 Front tank/std. bed F—Super Duty 1987—96 020—01—9619 Front tank/dual bed 1987—96 020—01—8291 Rear tank/std. bed 1987 —96 020—01—9620 Rear tank/dual bed


Document Created: 2005-09-01 12:42:50
Document Modified: 2005-09-01 12:42:50

Previous E.O. D-288-5 | Previous E.O. D-287 | Next E.O. D-288-7 | Next E.O. D-289