Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on June 17, 2015.
As of Sunday, December 22nd, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
See PDFSee PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-338-80
  • Executive Order 338-80 / D338-80
  • ARB # D-338-80
  • Executive Order No: D-338-80
  • C.A.R.B. No. D-338-80
  • Resolution D-338-80
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-338-80 PDF

D-338-80 Document:


CARB_D-338-80

                                       State of California
                                   AIR RESOURCES BOARD

                                 EXECUTIVE ORDER D—338—80
                          Relating to Exemptions Under Section 27156
                                       of the Vehicle Code

                               Harley—Davidson Motor Company
                       Screamin‘ Eagle Big Bore 4" Bolt On Cylinder Kits



Pursuant to the authority vested in the Air Resources Board (ARB) by Vehicle Code (VC)
Section 27156; and

Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the
Health and Safety Code and Executive Order G—14—012;

IT IS ORDERED AND RESOLVED: That the installation of the Screamin‘ Eagle Big Bore 4"
Bolt On Cylinder Kits, marketed and manufactured by the Harley—Davidson Motor Company,
3700 W. Juneau Avenue, Milwaukee, Wisconsin 53208 has been found not to reduce the
effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from
the prohibitions of VC Section 27156 for 2014 and 2015 model year Harley—Davidson Touring
motorcycles with either a 1688cc or 1802cc engine.

The Harley—Davidson Screamin‘ Eagle Big Bore 4" Bolt On Cylinder Kits includes two kits, A
Stage V Kit and a Stock Head Kit. The Stage V Kit, part number 92500038, includes larger bore
cylinders, CNC ported cylinder heads, SE259E Cams, and 58 mm Induction module. The Stock
Head Kit, part number 92500035, includes larger bore cylinders and SE585 Cams. A new ECM
calibration is included with both kits, there are no user adjustments on the new ECM calibration.
No other changes are required for proper installation.

Changes made to the design or operating conditions of the Screamin‘ Eagle Big Bore 4" Bolt On
Cylinder Kits, as exempted by ARB, which adversely affect the performance of the motorcycle‘s
pollution control system shall invalidate this Executive Order.

Marketing of the Screamin‘ Eagle Big Bore 4" Bolt On Cylinder Kits using any identification other
than that shown in this Executive Order or marketing of the Screamin‘ Eagle Big Bore 4" Bolt On
Cylinder Kits for an application other than those listed in this Executive Order shall be prohibited
unless prior approval is obtained from the ARB.

This Executive Order does not constitute any opinion as to the effect the use of these Screamin‘
Eagle Big Bore 4" Bolt On Cylinder Kits may have on any warranty either expressed or implied
by the Harley—Davidson Motor Company.


Harley—Davidson submitted two sets of modified motorcycle test results: One with the Stage V
Kit and another with the Stock Head Kit. The modified motorcycles met the applicable emission
standards when tested using the Cold—Start CVS—75 Federal Test Procedure (FTP) test cycle.
Results from emissions testing conducted at the Harley—Davidson Motor Company‘s emissions
laboratory, located in Milwaukee, Wisconsin, are shown below (in grams per kilometer).

    2014 1802cc Touring                                            CVS—75 FTP
                                                                HC+NOx          cCO
    Standards                                                    0.7          12.0

    Stage V Kit, w/df                                             0.6              1.6

    Stock Head Kit, w/df                                          0.4              11

ARB reserves the right in the future to review this Executive Order and the exemption provided
herein to assure that the exempted add—on or modified part continues to meet the standards and
procedures of Title 13, California Code of Regulations, Section 2222, et seq.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD
OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY
ALLEGED BENEFITS OF HARLEY—DAVIDSON MOTOR COMPANY‘S SCREAMIN‘ EAGLE
BIG BORE 4" BOLT ON CYLINDER KITS .

No claim of any kind, such as "Approved by the Air Resources Board", may be made with
respect to the action taken herein in any advertising or other oral or written communication.

Violation of any of the above conditions shall be grounds for revocation of this order. The order
may be revoked only after a ten—day written notice of intention to revoke the order, in which
period the holder of the order may request in writing a hearing to contest the proposed
revocation. If a hearing is requested, it shall be held within ten days of receipt of the request
and the order may not be revoked until a determination is made after the hearing that grounds
for revocation exist.

Executed at El Monte, California, this     l 7      day of June 2015.




                 Annette Hebert, Chief
                 Emissions Compliance, Automotive Regulations and Science Division


HARLEY—DAVIDSON MOTOR COMPANY — SCREAMIN‘ EAGLE BIG BORE 4" BOLT ON CYLINDER KITS — D—338—80



Document Created: 2015-08-17 10:47:12
Document Modified: 2015-08-17 10:47:12

Previous E.O. D-338-79 | Previous E.O. D-337 | Next E.O. D-338-81 | Next E.O. D-339