Approval Details

Valid E.O.


This Executive Order approved the specified parts on on January 26, 1999.
As of Monday, October 21st, 2019 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
IS1400 & IS14201990-98 Acura IntegrasCyborg kit includes the following: Open element reusable air filter, intake system tubing, assorted brackets, and hardware.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-476
  • Executive Order 476 / D476
  • ARB # D-476
  • Executive Order No: D-476
  • C.A.R.B. No. D-476
  • Resolution D-476
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-476 PDF

D-476 Document:

                                                          (Page 1 of 2)

                                State of California
                                AIR RESOURCES BOARD

                               EXECUTIVE ORDER D—476
                  Relating to Exemptions Under Section 27156
                              of the Vehicle Code

                              INJEN TECHNOLOGY CO., LTD
                                CYBORG INTAKE SYSTEM

Pursuant to the authority vested in the Air Resources Board by Section 27156
of the Vehicle Code; and

Pursuant to the authority vested in the undersigned by Section 39515 and
Section 39516 of the Health and Safety Code and Executive Order G—45—9;

IT IS ORDERED AND RESOLVED:    That the installation of the Cyborg Intake System,
manufactured and marketed by Injen Technology Co., LTD, 244 Pioneer Place,
Pomona, California  91768, has been found not to reduce the effectiveness of
the applicable vehicle pollution control system and, therefore, is exempt from
the prohibitions of Section 27156 of the Vehicle Code for the Acura, Honda,
Mitsubishi, and Nissan vehicles listed in Exhibit A.

The Cyborg Intake System includes the following main components:  open—element
reusable air filter, intake system tubing, assorted brackets, and hardware.

This Executive Order is valid provided that the installation instructions for
the Cyborg Intake System will not recommend tuning the vehicle to
specifications different from those of the vehicle manufacturer.

Changes made to the design or operating conditions of the Cyborg Intake
System, as exempt by the Air Resources Board, which adversely affect the
performance of the vehicle‘s pollution control system shall invalidate this
Executive Order.

Marketing of the Cyborg Intake System using any identification other than that
shown in this Executive Order or marketing of the Cyborg Intake System for an
application other than those listed in this Executive Order shall be
prohibited unless prior approval is obtained from the Air Resources Board.
Exemption of the Cyborg Intake System shall not be construed as exemption to
sell, offer for sale, or advertise any component of the kit as an individual

This Executive Order does not constitute any opinion as to the effect the use
of the Cyborg Intake System may have on any warranty either expressed or
implied by the vehicle manufacturer.

This Executive Order is granted based on examination of the On—Board
Diagnostic II (OBD—II) system of the vehicle in the modified confiquration,
and an engineering evaluation of the emissions impact of the device if
measured using the Cold—Start CVS—75 Federal Test Procedure.  However, the ARB
finds that reasonable grounds exist to believe that use of the Injen
Technology Cyborg Intake System may adversely affect emissions of motor
vehicles when operating under conditions outside the parameters of the CVS—75
Federal Test Procedure.  Accordingly, the ARB reserves the right to conduct
additional emission tests, in the future, as such tests are developed, that
will more adequately measure emissions from all cycle phases.  If such test
results demonstrate that the Injen Technology Cyborg Intake System adversely
affects emissions during off—cycle conditions    (defined as those conditions

INJEN TECHNOLOGY                                                EXECUTIVE ORDER D—476
CYBORG INTAKE SYSTEM                                             (Page 2 of 2)
which are beyond the parameters of the Cold—Start CVS—75 Federal Test
Procedure)},   this Executive Order shall be effectively rescinded as of the date
the test results are validated.  Further, if such test results or other
evidence provides the ARB with reason to suspect that the Cyborg Intake System
will affect the durability of the emission control system, Injen Technology
shall be required to submit durability data to show that the durability of the
vehicle emission control system is not, in fact, affected and/or that the
add—on or modified part demonstrates adequate durability.

In addition to the foregoing, the ARB reserves the right in the future to
review this Executive Order and the exemption provided herein to assure that
the exempted add—on or modified part continues to meet the standards and
procedures of Title 13,   California Code of Requlations,           Section 2222,    et seq.


No claim of any kind,   such as   "Approved by the Air Resources Board",            may be
made with respect to the action taken herein in any advertising or other oral
or written communication.

Violation of any of the above conditions shall be grounds for revocation of
this order.  The order may be revoked only after a ten—day written notice of
intention to revoke the order, in which period the holder of the order may
request in writing a hearing to contest the proposed revocation.                 If a hearing
is requested, it shall be held within ten days of receipt of the request and
the order may not be revoked until a determination after hearing that grounds
for revocation exist.                         &

Executed at El Monte, California, this         ;Zé          6    January 1999.

                                          R.   B.    Summerfield,    Chief
                                          Mobile Source Operations Division

                                   Exhibit A

  MY        Make                     Model                   pin

1990—93    Acura          Integra LS/RS/GS/LS special       151400
1992—93    Acura                   Integra GSR              1S1400
1994—98    Acura            Integra LS/RS/LS special        1S1420

1990—93    Honda       Accord DXLX/EX (exciluding 6 cyl.)   1$1600
1994—97    Honda       Accord DXULXEX (excluding 6 cyl.)    151650

1988—91    Honda                   Civic SVEX               1$1500
1992—95    Honda               Civic DXVLXVEXUSi            151520
1993—95    Honda                Det Sol SINTEC              1$1520
1996—98    Honda                 Civic CXDXLX               151540
1996—98    Honda                 Civic EX Coupe             1S1550

1992—96    Honda               Prelude S/SiNTEC             1S1700
1997—98    Honda                    Prelude                 151720

1993—94   Mitsubishi              Mirage S/LS               1$1800

1995—98    Nissan                   240SX                   1$1900

Document Created: 2005-09-01 12:44:08
Document Modified: 2005-09-01 12:44:08

| Previous E.O. D-475 | Next E.O. D-476-1 | Next E.O. D-477