Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on September 10, 2003.
As of Monday, October 21st, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModification
100-7011989 and older vehicles equipped with a 4 BBL Holley carburetorThe PowerAid Throttle Body Spacer is an aluminum spacer plate, approximately one inch thick with machined helical grooves on the inside ports, and is installed under the vehicle's throttle body or carburetor.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-520-3
  • Executive Order 520-3 / D520-3
  • ARB # D-520-3
  • Executive Order No: D-520-3
  • C.A.R.B. No. D-520-3
  • Resolution D-520-3
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-520-3 PDF

D-520-3 Document:


CARB_D-520-3

                                       State of California
                                   AIR RESOURCES BOARD

                                  EXECUTIVE ORDER D—520—3

                          Relating to Exemptions Under Section 27156
                                       of the Vehicle Code

                                    Evergreen Performance
                                 PowerAid Throttle Body Spacer

 Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle
 Code; and >

 Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of
 the Healith and Safety Code and Executive Order G—02—003;

 IT IS ORDERED AND RESOLVED: That the installation of the PowerAid Throttle Body
 Spacer, manufactured and marketed by Evergreen Performance, Inc., 14840 N. 74th Street,
 Scottsdale, Arizona 85260 has been found not to reduce the effectiveness of the applicable
 vehicle pollution control system and, therefore, is exempt from the prohibitions of Section
 27156 of the Vehicle Code for the vehicle applications listed in Exhibit A.

 The PowerAid Throttle Body Spacer is an aluminum spacer plate, approximately one inch
 thick with machined helical grooves on the inside ports, and is installed under the vehicle‘s
 throttle body or carburetor.

 This Executive Order is valid provided that the instalilation instructions for the PowerAid
 Throttle Body Spacer will not recommend tuning the vehicle to specifications different from
—those of the vehicle manufacturer.

 This Executive Order shall not apply to any Evergreen Performance‘s PowerAid Throttle
 Body Spacer advertised, offered for sale, sold with, or installed on a new motor vehicle prior
 to or concurrent with transfer to an ultimate purchaser.

 Changes made to the design or operating conditions of the PowerAid Throttle Body Spacer,
 as exempt by the Air Resources Board, which adversely affect the performance of the
 vehicle‘s pollution control system shall invalidate this Executive Order.

 Marketing of the PowerAid Throttle Body Spacer using any identification other than that
 shown in this Executive Order or marketing of the PowerAid Throttle Body Spacer for an
 application other than those listed in this Executive Order shall be prohibited unless prior
 approval is obtained from the Air Resources Board. Exemption of the PowerAid Throttle
 Body Spacer shall not be construed as exemption to sell, offer for sale, or advertise any
 component of the kit as an individual device.

 This Executive Order does not constitute any opinion as to the effect the use of the PowerAid
 Throttle Body Spacer may have on any warranty either expressed or implied by the vehicle
 manufacturer.                                                       ‘


                                                2.


 This Executive Order is granted based on a prior evaluation which determined that
 Evergreen Performance, Inc.‘s PowerAid Throttle Body Spacer does not cause an adverse
 effect on emissions of selected vehicles (Executive Order D—520—1), and does not affect the
 vehicle‘s ability to perform its On—Board Diagnostic II (OBD II) system monitoring. The same
 effect on emissions and OBD II system monitoring is expected from the use of the PowerAid
 Throttle Body Spacer on vehicles listed in this Executive Order.

 If evidence provides the ARB with reason to suspect that the PowerAid Throttle Body Spacer
 will affect the durability of the emission control system, Evergreen Performance shall be
 required to submit durability data to show that the durability of the vehicle emission control
 system is not, in fact, affected and/or that the add—on or modified part demonstrates
 adequate durability.

 The ARB reserves the right in the future 'io review this Executive Order and the exemption
 provided herein to assure that the exempted add—on or modified part continues to meet the
 standards and procedures of Title 13, California Code of Regulations, Section 2222, et seq.

 THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION,
 ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR
 RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING
 ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF EVERGREEN
 PERFORMANCE‘S POWERAID THROTTLE BODY SPACER.

 No claim of any kind, such as "Approved by the Air Resources Board", may be made with
 respect to the action taken herein in any advertising or other oral or written communication.

 Violation of any of the above conditions shall be grounds for revocation of this order. The
 order may be revoked only after a ten—day written notice of intention to revoke the order, in
 which period the holder of the order may request in writing a hearing to contest the proposed
—revocation. If a hearing is requested, it shall be held within ten days of receipt of the request
 and the order may not be revoked until a determination is made after the hearing that
 grounds for revocation exist.

 Executed at El Monte, California, this   [0”'/ day of September 2003.




                                  Mobile Source Operations Division




      EVERGREEN PERFORMANCE—POWERAID THROTTLE BODY SPACER—D—520—3


                                                      Exhibit A


  100—701     1989 and older vehicles equipped with a 4 BBL Holley carburetor
  100—702     1989 and older vehicles equipped with a 2 BBL Holley carburetor
  100—705     1989 and older vehicles equipped with a 4 BBL Quadrajet carburetor
  200—512     1999—2001 GM trucks equipped with a 4.8, 5.3, or 6.0L engine
  200—514     2001 Chevy 8.1L / 2002 Chevy 4.8,5.3,6.0,8.1L
  200—520     1996—1999 GM trucks equipped with a 5.0 or 5.7L engine
  200—522     1985—1992 GM passenger cars equipped with a 5.7L engine
  200—522     1985—1991 Corvette
  200—530     1996—2001 GM trucks equipped with a 7.4L engine
  200—540     1987—1995 GM trucks equipped with 4.3, 5.0, or 5.7L engine.
  200—550     1991—1995 GM trucks equipped with a 7.4L engine
  200—551     1987—1990 GM trucks equippedwith a 7.4L engine
  200—552—1   98—01 Chevy Cavalier 2. 2L
  200—553—1   96—01 Chevy Cavalier 2.4L
  200—554—1   02—04 Chevy Cavalier 2.2L
  200—557     02—03 Chevy Duramax 6.6L
  200—580     1996—2001 GM trucks equipped with a 4.3L engine
  200—581     1987—1993 GM trucks equipped with a 4.3L TBI engine
  200—582     1986—1990 GM trucks equipped with a 2.8L engine
  200—583     1996—1999 GM Lumina equipped with a 3.1L engine
  200—584     99—02 Impala / Grand Prix 3.8L
  200—586     02—03 Envoy / Trailblazer 4.2L.
  200—589     99—01 Chevy/GMC S—10/S—15
  300—560     1992—2001 Chrysler trucks equipped with a 3.9, 5.2, or 5.9L engine
  300—561     1987—2000 Voyager equipped with a 3.0 or 3.8L. engine
  300—562     1993—1997 Intrepid 3.5L
  300—564—1   1996—1999 Dodge Neon
  300—565     1994—2001 Chrysler trucks equipped with a V10 engine
  300—567     2002 Dodge Ram 4.7L
  300—568     2001—2003 PT Cruiser
+ 300—569     1992—2001 Dodge Dakota 2.5L
  300—570     1997—2001 Chrysler trucks equipped with a 3.9, 5.2, or 5.9L engine
  300—573     2003 Dodge Ram 4.7L Magnum
  300—574     2003 Dodge Durango 4.7L
  300—575     2000—2001 Chrysler trucks equipped with a 4.7L engine
  310—509     2003 Jeep Grande Charokee 4.7L
  310—510     1991—1999 Jeep YJ & XJ vehicles equipped with a 4.0L engine
  310—511     1987—1995 Jeep vehicles equipped with a 2.5L engine
  310—513     2000—2003 4.0L Jeeps
  310—515     1999—2002 Jeep Grand Cherokee 4.7L
  400—507     2001 Ford Sport Track
  400—516     2001 Ford F—150 XLT 4.2L V6
  400—517     1998 Explorer/Mountaineer with a 5.0L engine
  400—518     1996—2000 Crown Victoria equipped with a 4.6L engine
  400—519     1994—1996 Mustang equipped with a 3.8L engine
  400—521     2001—2002 Ford Powerstroke
  400—523—1   2000—2003 Ford Focus 2.0
  400—524     2003 Ford Mustang GT 4.6L
  400—525     1986—1987 Mustang equipped with a 5.0L engine


                                                Exhibit A

400—526 1988—1993 Mustang equipped with a 5.0L engine
400—527 1987—1995 Ford trucks equipped with a 5.0 or 5.8L engine
400—528 1988—1995 Ford trucks equipped with a 7.5L engine
400—529 1994—1995 Mustang equipped with a 5.0L engine
400—587 1999—2001 Ranger XLT 3.0L V6
400—588 1998—2000 Ranger 2.5 (4 cyl)
400—590 1997—2001 Ford trucks equipped with a 4.6L engine
400—591 1997—2001 Ford trucks equipped with a 5.4L engine
400—592 1999—2001 Ford trucks equipped with a V10 engine
400—593 1987—1996 Ford trucks equipped with a 6 cyl. engine
400—594 1999—2001 Mustang equipped with a 3.8L engine
400—595 1999—2001 Ford trucks equipped with a 7.3L engine
400—596 1997—2001 Ford trucks equipped with a 4.2L engine
400—597 1999—2001 Ford trucks equipped with a 5.4L engine
400—598 1999—2000 4.0 Explorer SOHC only.
400—599 2003 Ranger XLT 4.0L SOHC V6
510—502 1995—1999 Toyota trucks equipped with a 3.4L engine
510—504 2000 Toyota Sienna 2.0L V6 / Exploerer
510—566 2000—2001 Tundra V8                               —
520—505 1999—2001Nissan  trucks equipped with a 3.0L  engin



Document Created: 2005-09-01 12:41:49
Document Modified: 2005-09-01 12:41:49

Previous E.O. D-520-2 | Previous E.O. D-519 | Next E.O. D-520-4 | Next E.O. D-521