Approval Details

Valid E.O.

Validity


As of Saturday, February 1st, 2025 this Executive Order has not been overturned or superceeded.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-665-8
  • Executive Order 665-8 / D665-8
  • ARB # D-665-8
  • Executive Order No: D-665-8
  • C.A.R.B. No. D-665-8
  • Resolution D-665-8
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Vehicle: ApplicationPart NumberType - LocationTotal CountCert Level / Class
1996 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TLEV / PCTHN1.6VJG2EK
1996 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCTHN1.6VJG3EK
1996 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TIER1 / PCTHN1.6VJGKGK
1996 Honda Civic del Sol 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCTHN1.6VJG3EK
1996 Honda Civic del Sol 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TIER1 / PCTHN1.6VJGKGK
1997 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TLEV / PCVHN1.6VJG2EK
1997 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCVHN1.6VJG3EK
1997 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TIER1 / PCVHN1.6VJGKGK
1997 Honda Civic del Sol 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCVHN1.6VJG3EK
1997 Honda Civic del Sol 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TIER1 / PCVHN1.6VJGKGK
1998 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCWHNXV01.6CA3
1998 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TLEV / PCWHNXV01.6JL2
1999 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCXHNXV01.6CA3
1999 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1TLEV / PCXHNXV01.6JL2
2000 Honda Civic 1.60LALLEastern Catalytic 840301DIRECT FIT - Front of the vehicle1LEV1 LEV / PCYHNXV01.6CA3
Download: Executive Order D-665-8 PDF

D-665-8 Document:

CARB_D-665-8

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—665—8 Relating to Exemptions under Section 27156 and 38391 of the Vehicle Code Eastern Manufacturing, Inc. "Series 840300 Three—way Catalytic Converter" WHEREAS, Vehicle Code Sections 27156 and 38395, and Title 13, California Code of Regulations (hereafter "CCR") Section 2222(h), authorize the California Air Resources Board and its Executive Officer to exempt new aftermarket catalytic converters from the prohibitions of Vehicle Code Section 27156 and 38391. WHEREAS, Eastern Manufacturing, Inc. (Eastern) of 2151 Cabot Blvd., West Longhorne, Pennsylvania 19047, has applied to the Air Resources Board for exemption from the prohibitions in Vehicle Code Sections 27156 and 38391 to market its new aftermarket Series 840300 three—way catalytic converter (TWC) for installation on selected 1996 through 2000 Honda passenger cars (PC) equipped with on—board diagnostic II (OBD II) systems as specified in Appendix D—665—8 and incorporated herein. Series 840300 TWC will be used for a single (1 unit) close—coupled catalytic converter system application for the selected Honda PC having engine codes D16Y5 and D16Y7. The catalytic converter will be sold as a direct fit system. WHEREAS, pursuant to the authority vested in the Executive Officer by Health and Safety Code Section 39515 and in the Chief, Mobile Source Operations Division by Health and Safety Code Section 39516 and Executive Order G—02—003, the Air Resources Board finds that the above aftermarket catalytic converter complies with the California Vehicle Code Sections 27156 and 38395 and Title 13, California Code of Regulations, Section 2222(h). Emission performance of the catalytic converter was based on durability bench—aging by Umicore Autocat USA Inc. using the Air Resources Board—modified RAT—A bench—aging cycle for 75 hours, as specified in Appendix A to the "California Evaluation Procedures for New Aftermarket Catalytic Converters" as adopted on October 25, 2007. WHEREAS, emissions tests conducted at Automotive Testing and Development Services, Inc., Ontario, California, using a 2000 1.6L Honda Civic, test group YHNXVO1.6CA3, certified to the passenger car and Low Emission Vehicle emission standards (PC, LEV), showed that the vehicle met the applicable emission standards with Series 840300 TWC (1 unit) installed. OBD |I compatibility tests performed on the same test vehicle showed that Series 840300 TWC did not affect the vehicle‘s ability to perform OBD II system monitoring. The following are the test results in grams per mile: NMOG CO NOx 100K Standards 0.090 4.2 0.3 Series 840300 Test 1 0.077 1.2 0.2 Series 840300 Test 2 0.083 1.8 0.2

2. WHEREAS, evaluation of Series 840300 TWC using the procedures and criteria specified in Section (5)(B) of the "California Evaluation Procedures for New Aftermarket Catalytic Converters" as adopted on October 25, 2007, showed that the catalytic converter meets the requirements for proper MIL itlumination demonstration. THEREFORE, IT IS HEREBY RESOLVED that Eastern Manufacturing, Inc.‘s 840300 TWC is exempted from the prohibitions in Vehicle Code Sections 27156 and 38391 for installation on the approved vehicle applications specified in Appendix D—665—8 subject to the following conditions: 1. No changes are permitted to the catalytic converter as described in the application for exemption. Any changes to the catalytic converter or any of their components, and other factors addressed in this order must be evaluated and approved by the Air Resources Board prior to marketing in California. Marketing of the catalytic converter using identifications other than those shown in the exemption application, and in this Executive Order, or marketing of the catalytic converter for application other than the ones shown in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of this product shall not be construed as an exemption to sell, offer for sale, or advertise any components of the catalytic converter as individual devices. Any oral or written references to this Executive Order or its content by Eastern Manufacturing, Inc., its principals, agents, employees, distributors, dealers, or other representatives must include the disclaimer that the Executive Order or the exemption it provides is not an endorsement or approval of any emission reduction claims for the catalytic converter and is only a finding that the catalytic converter is exempt from the prohibitions of Vehicle Code Sections 27156 and 38391. — Eastern Manufacturing, Inc.‘s installation instructions for the new catalytic converter must conform to requirements in Section (h) of the "California Evaluation Procedures for New Aftermarket Catalytic Converters," as adopted October 25, 2007. Installation of the catalytic converter shall not cause the relocation of an oxygen sensor. Oxygen sensors must be installed in the same location, position and orientation as prescribed in the original equipment manufacturer‘s configurations. Upon installation, the catalytic converter must carry a manufacturer‘s warranty for five (5) years or 50,000 miles as prescribed in Section (f)(2) of the "California Evaluation Procedures for New Aftermarket Catalytic Converters," as adopted October 25, 2007. Eastern Manufacturing, Inc. and its vendors may not advertise the new aftermarket catalytic converter as "high flow or easy flow" catalytic converter or use any phrase that could make them appear to perform better than the original equipment manufacturer (OEM) catalytic converters. EASTERN MANUFACTURING, INC. — CATALYTIC CONVERTER — D—665—8

—3. 8. Any marketing arrangement of the new aftermarket catalytic converter by a third party, which involves the use of packaging identification different from the ones described in this Executive Order, must be approved by the Air Resources Board prior to shipment. 9. Eastern, its associates, vendors, other businesses, and individuals associated with Eastern, may not sell or supply new aftermarket catalytic converter substrates to a third party to be assembled in a different facility and marketed under this Executive Order without approval from the Air Resources Board. 10. Eastern Manufacturing, Inc. shall comply with the quality control procedures and reporting requirements in Section (f)(5) of the "California Evaluation Procedures for New Aftermarket Catalytic Converters," as adopted October 25, 2007. 11. Quality control reports must be submitted on a quarterly basis and warranty information reports must be submitted on a semi—annual basis. 12. Eastern Manufacturing, Inc. must provide a permanent label or stamp as specified under Section (f)(1) of the "California Evaluation Procedures for New Aftermarket Catalytic Converters," as adopted on October 25, 2007. 13. Eastern Manufacturing, Inc.‘s vehicle application catalog must conform with the requirements as specified under Section ()(4) of the "California Evaluation Procedures for New Aftermarket Catalytic Converters," as adopted on October 25, 2007. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a 30—day written notice of intention to revoke it, during which period the hoider of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within 30 days of receipt of the request, and the order may not be revoked until a determination is made, after the hearing, that grounds for revocation exist. Executed at El Monte, California, this é day of April 2011. Annette Hebert, Chief Mobile Source Operations Division EASTERN MANUFACTURING, INC. — CATALYTIC CONVERTER — D—665—8

Appendix D—665—8 Eastern Manufacturin#, Inc. 840300 " w C 3 5 5 w o s 6 5 €C Test 45 8 0o & F 5|> E)6 ?§ Converter MFR 5 2 y ';::?_I Make Model .§ Group '% 2 "51 Co:ve;ter S g 3 Part Part ,§ & 'g Name 0 P m yP 9 o x Type Number rclie CCl Ty $ &d 8| $|c 9§ 2 < & o 2 4 1 1996 Honda Civic del Sol 1.6 THN1.6VJG3EK LEV1I LEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 2 1996 Honda Civic del Sol 1.6 THN1.6VJGKGK TIERL PC S TWC 1 1 F DIRECT FIT 840301 ALL 3 1996 Honda Civic 1.6 THN1.6VJG3EK LEV1 LEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 4 1996 Honda Civic 1.6 THN1.6VJG2EK TLEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 5 1996 Honda Civic 1.6 THN1.6VJGKGK TIERL PC S TWC 1 1 F DIRECT FIT 840301 ALL 6 1997 Honda Civic del Sol 1.6 VHN1.6VJG3EK LEV1 LEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 7 1997 Honda Civic del Sol 1.6 VHN1.6VJGKGK TIERL PC S TWC 1 1 E DIRECT FIT 840301 ALL 8 1997 Honda Civic 1.6 VHN1.6VJG3EK LEV1 LEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 9 1997 Honda Civic 1.6 VHN1.6VJG2EK TLEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 1997 Honda Civic 1.6 VHN1.6VJIGKGK TIERL PC S TWC 1 1 F DIRECT FIT 840301 ALL 1998 Honda Civic 1.6 WHNXVO1L.6CA3 LEV1I LEV PC S TWC 1 1 E DIRECT FIT 840301 ALL 1998 Honda Civic 1.6 WHNXVO1.6JL2 TLEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 1999 Honda Civic 1.6 XHNXVO1.6CA3 LEV1I LEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 1999 Honda Civic 1.6 XHNXVO1.6JL2 TLEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 2000 Honda Civic 1.6 YHNXVO1.6JL2 TLEV PC S TWC 1 1 F DIRECT FIT 840301 ALL 2000 Honda Civic 1.6 YHNXVO1.6CA3 LEV1 LEV PC S TWC 1 1 F DIRECT FIT 840301 ALL Page 1 of 1


Document Created: 2011-04-11 17:42:17
Document Modified: 2011-04-11 17:42:17

Previous E.O. D-665-7 | Previous E.O. D-664 | Next E.O. D-665-9 | Next E.O. D-666