Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 18, 2002.
As of Monday, November 25th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModificationRemarks
4CD218-0401996-2002 Dodge Ram/T-300 5.2L V8Kit includes supercharger, fuel management unit, replacement fuel injectors, reprogrammed vehicle ECU, and the necessary brackets and ducting for installation.Crank pulley 7.0", supercharger pulley 3.125"

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-213-20
  • Executive Order 213-20 / D213-20
  • ARB # D-213-20
  • Executive Order No: D-213-20
  • C.A.R.B. No. D-213-20
  • Resolution D-213-20
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-213-20 PDF

D-213-20 Document:

CARB_D-213-20

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—213—20 Relating to Exemptions Under Section 27156 Of the Vehicle Code Vortech Engineering Inc. Supercharger System Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G—02—003; IT IS ORDERED AND RESOLVED; That the installation of the Supercharger System manufactured and marketed by Vortech Engineering Inc., 1650 Pacific Avenue, Channel Islands, CA 93033, has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for those vehicles listed in Exhibit A of this Executive Order except for those vehicles certified to the Ultra Low Emission Vehicle (ULEV) standards as noted in the exhibit. The Supercharger System includes a supercharger, brackets for mounting, and ducting to route air into the intake manifold. The system also includes, as applicable, an auxiliary fuel pump, replacement fuel injectors, a fuel management unit, reprogramming of the vehicle computer, a manifold air pressure sensor bleed assembly, and an intercooler assembly. The supercharger and crankshaft pulley diameters are listed in Exhibit A of this Executive Order. The supercharger produces a maximum of 10.0 psi of boost pressure at maximum engine speed. This Executive Order is valid provided that the installation instructions for the Supercharger System will not recommend tuning the vehicle to specifications different from those submitted by the device manufacturer. This Executive Order shall not apply to any Vortech Engineering Inc. Supercharger System advertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with the transfer to an ultimate purchaser. Changes made to the design or operating conditions of the Supercharger System, as exempted by the Air Resources Board, which adversely affect the performance of the vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of the Supercharger System using any identification other than that shown in this Executive Order or marketing of the Supercharger System for an application other than those

2 listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of the system shall not be construed as exemption to sell, offer for sale, or advertise any component of the kit as an individual device. This Ekecutive Order does not constitute any opinion as to the effect the use of the Vortech Engineering Inc. Supercharger System may have on any warranty either expressed or implied by the vehicle manufacturer. This Executive Order is granted based on previously submitted emission test data which showed that the use of Vortech‘s Supercharger System does not cause an adverse effect on the vehicles‘ emissions nor affect the ability of the vehicles‘ OBDIl system to monitor various emissions related functions (Executive Order Numbers D—195—18 and D—213—19). If test results or other evidence provides the ARB with reason to suspect that the Supercharger System will affect the durability of the emission control system, Vortech Engineering Inc. shall be required to submit durability data to show that the durability of the vehicle emissions control system is not, in fact, affected and/or that the add—on or modified part demonstrates adequate durability. In addition to the foregoing, the ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of Title 13, California Code of Regulations, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF VORTECH ENGINEERING INC‘S SUPERCHARGER SYSTEM. No claim of any kind, such as "Approved by the Air Resources Board", may be made with respect to the action taken herein in any advertising of other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a ten—day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination is made, after the hearing, that grounds for revocation exist. Executed at El Monte, California, this ZE "’ day of December 2002. Allfzfyons, Chief Mobile Source Operations Division VORTECH ENGINEERING INC.— SUPERCHARGER SYSTEM — D—213—20

Exhibit A Chrysler Corp. W Engine size Crank pulley dia, |S/C pulley Part Number Model years |Vehicle type/model . (liters) (in.) dia. (in. 4C0D0218—040 1996—2002 {Dodge Ram/T—300 5.2 7.00 (Stock) 3.125 4CD218—050 1996—2003 |Dodge Ram/T—300 5.9 7.00 (Stock) 3.125 4CE218—010* 1997—2003 |Dodge Dakota/Durango 5.9 7.00 (Stock) 3.125 4CE218—020 1997—2002 {Dodge Dakota/Durango 5.2 7.00 (Stock) 3.125 4CJ218—020 1996—2002 |Jeep Grand Cherokee 5.2 7.00 (Stock) 3.125 40J218—030 1996—2003 |Jeep Grand Cherokee 5.9 7.00 (Stock) 3.125 Ford Motor Company Engine size Crank pulley dia. 1S/C pulley Part Number Model years |Vehicle type/model (liters) (in.) dia. (in.) 4FL218—050 2000—2003 |Mustang 2V 4.6 6.60 (Stock) 3.6 4FL218—060 2000—2003 |Mustang 2V w/charge cooler 4.6 6.60 (Stock) 3.33 4FL218—070 2001 Mustang 2V Bullitt 4.6 6.60 (Stock) 3.6 4FL218—080 2001 Mustang 2V Bullitt w/charge cooler 4.6 6.60 (Stock) 3.33 4FR218—030 2001—2003 |Mustang/Mach 1 4V 4.6 6.60 (Stock) 3.47 4FR218—040 2001—2003 |Mustang/Mach 1 4V w/charge cooler 4.6 6.60 (Stock) 3.47 4FM218—010 19971998 |F—series truck/Expedition 4.6 6.7 3.6 4FM218—020 1997—1998 |F—series truck/Expedition/Navigator 2V 5.4 6.7 3.33 4FM218—030 1999—2003 |F—series truck/Expedition/Navigator 2V 5.4 6.7 3.33 4FM218—040 1999—2003 |F—series truck/Expedition 4.6 6.7 3.6 4FM218—050 1999—2003 |F—series truck/Exped/Nav 2V w/charge cooler 5.4 6.7 3.12 4FT218—010 1999—2003 |Super duty truck/SUV 2V 5.4 6.7 3.33 4F1218—020 1999—2003 |Super duty truck/SUV 6.8 6.7 3.47 4FT218—030 1999—2003 |Super duty truck/SUV w/charge cooler 6.8 6.7 3.12 4FS5218—010 1999—2002 |Mercury Cougar/Ford Contour 2.5 6.3 3.33 4FL218—100 1998—2000 |Crown Victoria / Grand Marquis 4.6 6.60 (Stock) 3.6 4FL218—110 2001—2003 |Crown Victoria / Grand Marquis / Marauder®* 4.6 6.60 (Stock) 3.6 4F})218—010 2002—2003 |Ford Focus SVT* 2 5.19 (Stock) 3.125 4FJ218—020 2002—2003 |Ford Focus SVT w/charge cooler* 2 5.19 (Stock) 3.125 4FJ218—030 2000—2003 |Ford Focus* 2 5.19 (Stock) 3.125 4FJ218—040 2000—2003 |Ford Focus w/charge cooler* 2 5.19 (Stock) 3.125 *Excluding the following 2001—2003 model year vehicles, which are certified to the ULEV emissions standards: Crown Victoria / Grand Marquis / Marauder 3FMXVO4.6VGS, 3FMXVO4.6VF5, 3FMXVO4.6VHS Ford Focus 1FMXVO2.OVJ2, 1FMXVO2.0VJ3, 1FMXVO2.0V14, 1 FMXVO2.OVJ5 2FMXVO2.0VJ3, 2FMXVO2.0VJ4, 3FMXVO2.OVH1 The emission standard and engine family name can be found on the Vehicle Emission Control Information label. Page 1


Document Created: 2005-09-01 12:40:55
Document Modified: 2005-09-01 12:40:55

Previous E.O. D-213-19 | Previous E.O. D-212 | Next E.O. D-213-21 | Next E.O. D-214