Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on March 4, 1993.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
2321, 2331 2341, 23431993 and older model-year Ford vehicles with 289-351 c.i. gasoline engine

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-216-9
  • Executive Order 216-9 / D216-9
  • ARB # D-216-9
  • Executive Order No: D-216-9
  • C.A.R.B. No. D-216-9
  • Resolution D-216-9
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-216-9 PDF

D-216-9 Document:

CARB_D-216-9

(Paze L of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—216—9 Relating to Exemptions Under Secticn 27156 of the Vehicle Code J. BITTLE AMERICAN, INC. 1.7 ROLLER ROCKER, PART NOS. 2341, 2343, 2321, AND 2331 Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned ty Sections . 39515 and 39516 of the Health and Safety Code,and Executive Or x G—45—5; IT IS ORDERED AND RESOLVED: That the installation of the 1.7 Roller Rocker, part nos. 2341, 2343, 2321, and 2331 manufactured by J. Bittle American, Inc. of 7149 Mission Gorge Road, San Diego, California 92120, have been found not to reduce the effectiveness of the applicatle vehicle pollution control system and, therefore, are exempt from the prohibitions of Section 27156 of the Vehicle Code for 1993 and older Ford Motor Company vehicles with a 289 to 351 CID V—8 gasoline engine. This Executive Order—is valid provided that installat:on instructions for this 1.7 Roller Rocker will not recommend tuning the vehicle to specifications different from those ‘submitted by J. Elttle American, Inc. Changes made to the design or operating conditions of the Roller Rocker, as exempt by the Air Resources Board, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of these Roller Rocker using any identificstion other than that shown in this Executive Order or marketing of the Roller Rocker for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. This Executive Order does not constitute any opinion as to the effect the use of this Roller Rocker may have on any warranty either expressed or implied by the vehicle manufacturer. 1 — THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICZILON, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE A RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION B FITS CR ANY ALLEGED BENEFITS OF J. BITTLE AMERICAN‘S 1.7 ROLLER ROCKER. No claim of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any sivertising or other oral or written communication.

J. BITTLE AMERICAN, INC. EXECUTIVE ORDER D—216—9 1.7 ROLLER ROCKER (Page 2 of 2) Violation of any of the above conditions shall be grourds for revocation of this order. The order may be revoked only after ten day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked untxl a detertination after hearing that grounds for revocation exist. Executed at El Monte, California, this §Z . day of Harch 1993. Mobile Source Division


Document Created: 2005-09-01 12:42:37
Document Modified: 2005-09-01 12:42:37

Previous E.O. D-216-8 | Previous E.O. D-215 | Next E.O. D-216-10 | Next E.O. D-217