Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on April 8, 1992.
As of Friday, December 27th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModificationRemarks
30051992 and older model-year GM V8, 262-400 cu. in.1.6 Ratio 3/8 stud dia (for press in studs)Energizer Aluminum Rocker Arms

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-225-9
  • Executive Order 225-9 / D225-9
  • ARB # D-225-9
  • Executive Order No: D-225-9
  • C.A.R.B. No. D-225-9
  • Resolution D-225-9
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-225-9 PDF

D-225-9 Document:

CARB_D-225-9

(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—225—9 Relating to Exemptions Under Section 27156 of the Vehicle Code CRANE CAMS, INC. ROCKER ARMS Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—45—5; IT IS ORDERED AND RESOLVED: That the installation of the rocker arms manufactured by Crane Cams, Inc. of 530 Fentress Blivd., Daytona Beach, FL 32114 has been found not to reduce the effectiveness of the applicable vehicle pollution control system and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for those applications listed in Exhibit A, which is attached hereto and incorporated herein. This Executive Order is valid provided that installation instructions for these rocker arms will not recommend tuning the vehicle to specifications different from those submitted by Crane Cams, Inc. Changes made to the design or operating conditions of the rocker arms, as exempt by the Air Resources Board, which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order. Marketing of this performance package using any identification other than that shown in this Executive Order or marketing of these rocker arms for an application other than those listed in thig Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of these rocker arms shall not be construed as exemption to sell, offer for sale, or advertise any component of the kit as an individual device. This Executive Order does not constitute any opinion as to the effect the use of these rocker arms may have on any warranty either expressed or implied by the vehicle manufacturer. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF CRANE CAMS, INC. ROCKER ARMS. No claim of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any advertising or other oral or written communication.

CRANE CAMS, INC. EXECUTIVE ORDER D~225—9 ROCKER ARMS (Page 2 of 2) Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after ten day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing im requested, it shall be ‘teld within ten days ofraceipt of the request and the order may not be revoked until a determination after hearing that grounds for revocation exist. Executive Order D—225—1 is superceded and of no further force and effect. Executed at El Monte, California, this 23 day pril, 1992. Assi@tant Division Chief Mobile Source Division

Exhibit A Energizer Aluminum Rocker Arms o PART_NO. General Motors V8, 262—400 cu. in. 1.6 Ratio, 3/8 stud (for press—in studs}k 23005 1.6 Ratio, 3/8 stud ———————————— 3002 1.6 Ratio, 7/16 Stud —————————————_—__—_———— 3003 "Super Blue" Extruded Aluminum APPLICATION PART No. General Motors V8, 262—400 cu. in. 1.6 Ratio, 7/16 Stud ————————————_—_—_c—c—occecccccmcesscecmccc—wc—a=—4— 3051 Hi Intensity Rocker Arms APPLICATION PART NO. General Motors V8, 262—400 cu. in. 1.6 Ratio, 3/8 Stud —————————_—_—c—c——caw ce e en en on m e in on ma me um me on on e on n mm um ho onin on mm e un 11746—16 1.6 Ratio, 7/16 stud ———————————— ——— 11747—16 f — . Pe&estal Mount Rocker Arms | AP#LICATION _ PART NO. General Motors V8, 262—400 cu. in. 1.6 Ratio Intake Offset Left —————————————_—___ccccom—emec—cucc——~—— 11734L—1 1.6 Ratio Intake OffSet Right ——————————————___c_cceccccccnccc_c~ 11734R—1 1.55 Ratio Exhaust OffSe@t Left ———————————_______—~__—__c_—._—_—c_a———— 11737L—1 1.55 Ratio Exhaust OffSset RiGht ——————————————————___—_—_—_——~_—.————— 11737R—1 1.6 Ratio Exhaust OffS@t L@ft ———————————o—__esccecccmecmemmc——zemce——. 11738L—1 1.6 Ratio Exhaust Offset Right ————— 11738R—1

Aluminum Rockers APPLICATION NO . General Motors V8, 396—454 cu. in. 65—91 with Dart "Big Chief" cyl. heads, 1.75 Ratio Intake Offset Left ——————— 11732L—1 1.75 Ratio Intake Offset Right ——— —— 11732R—1 1.8 Ratio Intake Offset Left ——————————— ——— 11733L~—1 1.8 Ratio Intake Offget Right ———————————————————___—_———_—s.————— 11733R—1 1.8 RatiO EXRAUBt ——————_——__—_—_———c se in ie e m on in on ue ie s me m in in hn m m e on n nmm an m n ce e 13739—1 Shaft—Mounted Needle Bearing Rocker Arms APPLICATION PART NO. General Motors V8, 262—400 cu. in. 1.6 Ratio Intake and Exha@ugt ————————————————_———_—_______._..———=—== 84790—1 1.6 RatiO INCAKk@ —————————«_—=————c—_—cawecceccmeccmemmmmeccmeemec——ccsc— 84791—1 1.6 Ratio intake, 1.55 FAtiO @XhAUSt ———————————————_—_—_=_=_—______« 11790—1 Aluminum Rocker Arms PPLICATION PART NO. General Motors V8, 262—400 cu. in. 1.6 Ratio 3/8 gtud ————————————_—_—___«_———— 11759—16 1.6 Ratio0 7/16 Stud ———————————————ccocecocccccecccccecececceccc~, 11755—16 1.6 Ratio 7/16 Stud ———————————_—__c__c_oceczceceeccucceccescccc~, 11768TR—16 Variable Ratio (1.5, 1.55, 1.6), 3/8 Stud ——————————_—_—_——_——_—_____= 11778—16 Variable Ratio (1.5, 1.55, 1.6), 3/8 Stud ————————————————_———_——— 11779—16 Variable Ratio (1.5, 1.55, 1.6), 7/16 Stud ——————————————__—_———— 11780—16 1.6 Ratio Left and Right Exhaust, 7/16 gtud ———————————————————— 11770TR—16 1.6 Ratio Left 7/16 Stud o—————————————ecccccccccmmecmccccc—~ccscc—— 11770L—1 1.6 Ratio Right 7/16 Stud ———————————_—————__—___.cccceccccccc_——ecac~— 11770R—1

Exhibit A cont. Aluminum Rocker Arms Cont. APPLICATION PART_NO General Motors V8, 262—400 cu. in. 1.6 Ratio Left 7/16 Stu&.———————————————cecmceeccemenccememmemnceamce———.— 11766L—i 1.6 Ratio Right 7/16 Stud ——————————————o—c—c—c—ccccccccmeccccc————<.> 11766R—1 1.6 Ratio Left 7/16 Stud ——————————————eoccccmecccaccccceececcc=———— 11762L—1 1.6 Ratio Right 7/16 Stud ——————————————————ccmcemccscamcecccce—c———— 11762R—1 Aluminum Rocker Arms APPLICATION PART_NO. General Motors V8, 396—454 cu. in. 1.8 Ratio 7/16 Stud —————————————_—_—___occcczccecceccececcececccccce~, 13755—16 1.8 Ratio 7/16 Stud —————————_e————cecccccccccccmeacccccccccec—e——cccc——> 13768TR—16 Stamped Steel Rocker Arms APPLICATION PART_NO. General Motors V8, 262—400 cu. in. 1.6 Ratio 3/8 Stud ——————————_——_—_c—_cc_ccccc__cccceccececec~————— 1180216 1.6 Ratio 3/8 Stud ——————————————___cccczccczccccecccccemececccc~~, 11807—16


Document Created: 2005-09-01 12:40:07
Document Modified: 2005-09-01 12:40:07

Previous E.O. D-225-8 | Previous E.O. D-224 | Next E.O. D-225-10 | Next E.O. D-226