Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on December 4, 1997.
As of Monday, October 21st, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
87708, 887081998 Chrysler Dodge Dakota 2WD/4WD equipped with 5.2L/ 5.9L V-8 engines

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-182-23
  • Executive Order 182-23 / D182-23
  • ARB # D-182-23
  • Executive Order No: D-182-23
  • C.A.R.B. No. D-182-23
  • Resolution D-182-23
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-182-23 PDF

D-182-23 Document:


CARB_D-182-23

                                                              (Page 1 of 2)
sfiey




                                        State of California
                                        AIR RESOURCES BOARD

                                      EXECUTIVE ORDER D—182—23
                           Relating to Exemptions Under Section 27156
                                        of the Vehicle Code

                                  WALKER MANUFACTURING COMPANY
                                     TUBULAR EXHAUST HEADERS


        Pursuant to the authority vested in the Air Resources Board (ARB) by Section
        27156 of the Vehicle Code;    and

        Pursuant to the authority vested in the undersigned by Sections 39515 and
        39516 of the Health and Safety Code and Executive Order G—45—9;

        IT IS ORDERED AND RESOLVED:     That installation of the Tubular Exhaust Headers,
        manufactured by Walker Manufacturing Company of 2701 N. Dettman Road, Jackson,
        Michigan 49201,   have been found not to reduce the effectiveness of the
        applicable vehicle pollution control system, and therefore, the Tubular
        Exhaust Headers are exempt from the prohibitions of Section 27156 of the
        Vehicle Code for use on the following vehicles:


               Part Number                  Vehicle Application
               Ceramic   Paint

               87708      88708             1998 Chrysler 5.2/5.9 L V—8 2WD/4WD Dodge Dakota

               87709      88709             1998 Chrysler 8.0 L V—10 2WD/4WD Dodge Ram
                                            2500/3500 pick—up and chassis cab

               87710      88710             1998 Chrysler 5.2/5.9 L V—8 2WD/4WD Dodge Ram
                                            1500/2500 pick—up with a single catalytic
                                            converter

               87711      88711             1998 Ford 4.6 L V—8 2WD/4WD F150/250 pick—up

                                            1997—1998 Ford 4.6 L V—8 2WD/4WD Expedition

               87716      88716             1998 Chevrolet/GMC 5.0/5.7 L V—8 2WD/4WD
                                            C1500/2500 and K1500/2500 pick—up
                                            1998 Chevrolet/GMC 5.7 L V—8 2WD/4WD
                                            Suburban


               The above vehicle application includes only those vehicles that
               have been certified to meet the California Tier—1l exhaust
               emission standards.  It excludes those vehicles that have been
               certified to meet the low—emission vehicle emission standards.


        This Executive Order is valid provided that installation instructions
        for the headers not recommend tuning the vehicles to specifications
        different from those submitted by the vehicle manufacturer.

        Changes made to the design or operating conditions of the headers, as
        exempt by the ARB, which may adversely affect the performance of the


WALKER MANUFACTURING COMPANY                            EXECUTIVE ORDER D—182—23
TUBULAR EXHAUST HEADERS                                 (Page 2 of 2)


vehicles‘ pollution control system shall invalidate this Executive
Order .

Marketing of the headers using an identification other than that shown
in this Executive Order or marketing of the headers for an application
other than those listed in this Executive Order shall be prohibited
unless prior approval is obtained from the ARB.  Exemption of the
headers shall not be construed as an exemption to sell,         offer for sale,
or advertise any components of the headers as individual devices.

This Executive Order does not constitute any opinion as to the effect
the use of the headers may have on any warranty either expressed or
implied by the vehicle manufacturer.

No claim of any kind, such as "Approved by the Air Resources Board," may
be made with respect to the action taken herein in any advertising or
other oral or written communication.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY
ALLEGED  BENEFITS OF WALKER MANUFACTURING COMPANY‘S TUBULAR EXHAUST
HEADERS.

Violation of any of the above conditions shall be grounds for revocation
of this Executive Order.   The Executive Order may be revoked only after
a ten—day written notice of intention to revoke the Executive Order,         in
which period the holder of the Executive Order may request in writing a
hearing to contest the proposed revocation.  If a hearing is requested,
it shall be held within ten days of receipt of the request and the
Executive Order may not be revoked until a determination after the
hearing that grounds for revocation exist.

Executed at El Monte,   California,   this        day      December 1997.




                                             72
                                             R. B/ Summerfield, Chief
                                             Mobfle Source Operations Division



Document Created: 2005-09-01 12:42:43
Document Modified: 2005-09-01 12:42:43

Previous E.O. D-182-22 | Previous E.O. D-181 | Next E.O. D-182-24 | Next E.O. D-183