Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on October 23, 1997.
As of Thursday, November 14th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

ModelsModificationRemarks
1981-91 American Motors/Chrysler Jeep vehicles equipped with the 4.2 liter engine and a feed-back carburetor or a throttle bodyThe installation of the kit requires the removal of all emissions and fuel delivery related components that are located within the engine compartment. The following items are a sample of the components removed: Air cleaner assembly, carburetor/throttle body, intake manifold, distributor, electronic control module (ECM), oxygen sensor, carbon canister, EGR valve, air injection system (air tubes plugged), fuel pump, and other related vacuum valves and lines.The kit includes the following new Chrysler components: Heated oxygen sensor, intake manifold with a fuel injection rail, throttle body with an open element air filter, electronic advance distributor, the factory EGR system is removed and discarded, electronic fuel pump, carbon canister, ECM, and a new coolant, MAP and MAT sensor. Mopar performance will provide a new tune-up and vacuum label with the kit.

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-265-13
  • Executive Order 265-13 / D265-13
  • ARB # D-265-13
  • Executive Order No: D-265-13
  • C.A.R.B. No. D-265-13
  • Resolution D-265-13
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-265-13 PDF

D-265-13 Document:


CARB_D-265-13

                                                                                 (Page l of 2)

                                             State of California
                                        AIR RESOURCES BOARD

                                     EXECUTIVE ORDER D—265—13
                               Relating to Exemptions Under Section 27156
                                            of the Vehicle Code

                                        MOPAR PERFORMANCE
                               Jeep 4.2 Liter Multi—Point Fuel Injection Kit

Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and

Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety
Code and Executive Order G—45—9;

IT IS ORDERED AND RESOLVED: That the installation of the Jeep 4.2 Liter Multi—Point Fuel Injection
Kit manufactured by Mopar Performance of 26311 Lawrence Avenue, Center Line, Michigan 48015—9760,
has been found not to reduce the effectiveness of the applicable vehicle pollution control system and,
therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for all 1981—91 American
Motors/Chrysler Jeep vehicles equipped with the 4.2 liter engine and a feed—back carburetoror a throttle
body.

The installation ofthe kit requires the removal of all emissions and fuel delivery related components that are
located within the engine compartment. The following items are a sample of the components removed: Air
cleaner assembly, carburetor/throttle body, intake manifold, distributor, electronic control module (ECM),
oxygen sensor, carbon canister, EGR valve, air injection system (air tubes plugged), fuel pump, and other
related vacuum vaives and lines.

The kit includes the following new Chrysler components: Heated oxygen sensor, intake manifold with a fuel
injection rail, throttle body with an open element air filter, electronic advance distributor, the factory EGR
system is removed and discarded, electronic fuel pump, carbon canister, ECM, and a new coolant, MAP and
MAT sensor. Mopar performance will provide a new tune—up and vacuum label with the kit.

This Executive Order is valid provided that installation instructions for this kit will not recommend tuning
the vehicles to specifications different from those of Mopar Performance.

Changes made to the design or operating conditions ofthe devices, as exempt by the Air Resources Board,
which adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive
Order.

Marketing of this device using any identification other than that shown in this Executive Order or marketing
ofthis device for an application other than those listed in this Executive Order shall be prohibited unless
prior approval is obtained from the Air Resources Board.

This Executive Order does not constitute any opinion as to the effect the use of the device may have on any
warranty either expressed or implied by the vehicle‘s manufacturer.

THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION,
APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF
CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED
BENEFITS OF MOPAR PERFORMANCE‘S JEEP 4.2 LITER MULTI—POINT FUEL INJECTION KIT .

No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the
action taken herein in any advertising or other oral or written communication.


MOPAR PERFORMANCE                                                               Executive Order D—265—13
Jeep 4.2 Liter Multi—Point Fuel Injection Kit                                   (Page 2 of 2)




Violation of any of the above conditions shall be grounds for revocation of this order. The order may be
revoked only after ten days written notice of intention to revoke the order, in which period the holder ofthe
order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it will
be held within ten days of receipt of the request and the order may not be revoked until a determination after
hearing that grounds for revocation exist.

Executed at El Monte, California, this _@_ day of October 1997.




                                                 R. B. Supimerfield, Chi
                                                 Mobile Source Operations Division



Document Created: 2005-09-01 12:42:23
Document Modified: 2005-09-01 12:42:23

Previous E.O. D-265-12 | Previous E.O. D-264 | Next E.O. D-265-14 | Next E.O. D-266