Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on June 3, 2003.
As of Thursday, December 26th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModels
020-01-082711987-1997 Ford PU or Cab Chassis Conversions to Flatbeds or Utility Boxes 7.3L, Diesel

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-288-37
  • Executive Order 288-37 / D288-37
  • ARB # D-288-37
  • Executive Order No: D-288-37
  • C.A.R.B. No. D-288-37
  • Resolution D-288-37
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-288-37 PDF

D-288-37 Document:

CARB_D-288-37

State of California AIR RESOURCES BOARD EXECUTIVE ORDERD—288—37 Relating to Exemptions under Section 27156 of the Vehicle Code Transfer Flow, Inc. Replacement Fillneck Kits Pursuant to the authority vested in the Air Resources Board (ARB) by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 of the Health and Safety Code and Executive Order G—02—003; IT IS ORDERED AND RESOLVED: That installation of the Replacement Fillneck Kits, manufactured by Transfer Flow, Inc. of 1444 Fortress Street, Chico, California 95926, has been found not to reduce the effectiveness of the applicable vehicle pollution control system, and therefore, the Replacement Fillneck Kits are exempt from the prohibitions in Section 27156 of the Vehicle Code as listed in Exhibit A. This exemption is based on an engineering evaluation of the impact the Replacement Fillneck Kits have on the vehicles‘ evaporative emissions and their On—Board Diagnostic II Systems. This Executive Order is valid provided that installation instructions for the Replacement Fillneck Kits do not recommend tuning the vehicles to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the Replacement Fillneck Kits, as exempt by the ARB, which adversely affect the performance of the vehicle‘s pollution control system, shall invalidate this Executive Order. Marketing of the Replacement Fillneck Kits using identification other than that shown in this Executive Order or for an application other than that listed in this Executive Order shall be prohibited unless prior approval is obtained from the ARB. Exemption of the Replacement Fillneck Kits shall not be construed as an exemption to sell, offer for sale, or advertise any component of the Replacement Fillneck Kits as individual devices. This Executive Order shall not apply to any Replacement Fillneck Kits advertised, offered for sale, sold with, or installed on a motor vehicle prior to or concurrent with transfer to an ultimate purchaser. This Executive Order does not constitute any opinion as to the effect the use of the Replacement Fillneck Kits may have on any warranty either expressed or implied by the vehicle manufacturer.

2. No claim of any kind, such as "Approved by the Air Resources Board," may be made with respect to the action taken herein in any advertising or other oral or written communication. In addition to the foregoing, the ARB reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of California Code of Regulations, Title 13, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF TRANSFER FLOW, INC.‘S REPLACEMENT FILLNECK KITS. _— Violation of any of the above conditions shall be grounds for revocation of this Executive Order. The Executive Order may be revoked only after a ten—day written notice of intention to revoke the Executive Order, in which period the holder of the Executive Order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the Executive Order may not be revoked until a determination is made after a hearing that grounds for revocation exist. Executed at El Monte, California, this SRD day of June 2003. Alley%ief Mobile Source Operations Division TRANSFER FLOW, INC. — REPLACEMENT FILLNECK KITS — D—288—37

EXHIBIT A VEHICLE . ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU or 7.3 L 1987—1997 020—01—08271 OEM front tank/formed fillneck kit Cab Chassis Diesel 1987—1997 020—01—09615 OEM front tank/straight fillneck kit Conversions to 1987—1997 020—01—08767 OEM front tank/straight fillneck kit Flatbeds or Utility Boxes 1987—1997 020—01—08272 OEM rear tank/formed fillneck kit 1987—1997 020—01—09616 OEBEM rear tank/straight fillneck kit 1987—1997 020—01—08290 OEM rear tank/formed fillneck kit 1987—1997 020—01—08768 OEM rear tank/straight fillneck kit 1999—2003 020—01—10585 OEM tank with formed fillneck and formed transfer tube kit 1999—2003 020—01—10586 OEM tank with formed fillneck and straight transfer tube kit 1999—2003 020—01—10587 OEM tank with straight fillneck and formed transfer tube kit 1999—2003 020—01—10588 OEM tank with straight fillneck and straight transfer tube kit Ford PU or 5.4 L 1987—1997 020—01—08273 OEM front tank/formed fillneck kit Cab Chassis 7.5 L 1987—1997 020—01—09619 OEM front tank/straight fillneck kit Conversions to Gas 1987—1997 020—01—09617 OEM front tank/straight fillneck kit Flatbeds or Utility Boxes 1987—1997 020—01—08274 OEM rear tank/formed fillneck kit 1987—1997 020—01—09618 OEM rear tank/straight fillneck kit 1987—1997 020—01—08291 OEM rear tank/formed fillneck kit 1987—1997 020—01—09620 OEM rear tank/straight fillneck kit 1999—2003 020—01—10589 OEM tank with formed fillneck and formed transfer tube kit 1999—2003 020—01—10590 OEM tank with formed fillneck and straight transfer tube kit 1999—2003 020—01—10591 OEM tank with straight fillneck and formed transfer tube kit 1999—2003 020—01—10592 OEM tank with straight filineck and straight transfer tube kit 1999—2003 020—01—11679 OEM tank supply and return transfer tube kit for generator set 1999—2003 020—01—11975 OEM tank supply and return transfer tube kit for generator set Ford 6.8 L 2002—2003 020—01—12161 OEM aft tank supply and return kit for generator set Stripped Chassis Gas Ford PU 7.3 L 1987—2003 020—01—11876 TFI cross the bed tank with camper shell fillneck kit F250/350 HD Diesel 1987—2003 020—01—11875 TFI cross the bed tank with camper shell fillneck kit , 1999—2003 020—01—11967 OEM front tank supply and return transfer tube kit for generator set 1999—2003 020—01—11912 OEM front tank fillneck kit 1987—2003 020—01—11737 TFI cross the bed tank with camper shell kit 1987—1997 020—01—09292 OEM front tank/standard bed kit 1987—1997 020—01—09284 OEM front tank/dual bed kit 1987—1997 020—01—08047 TFI front tank/standard bed kit 1987—1997 020—01—08048 TFI front tank/dual bed kit 1987—2003 020—01—11735 TFL cross the bed tank with camper shell fillneck kit 1987—1997 020—01—09291 OEM reartank/standard bed kit 1987—1997 620—01—09285 OEM rear tank/dual bed kit 1987—1997 020—01—06930 TFI rear tank/standard bed kit 1987—1997 020—01—06929 TFI rear tank/dual bed kit Transfer Flow, Inc. — Replacement Fillneck Kits — D—288—37

(Page 3) VEHICLE ENGINE MoODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER DESCRIPTION Ford PU 5.4 L 1987—1997 020—01—06937 OEM front tank/standard bed kit F250/350 HD 6.8 L 1987—1997 020—01—06940 OEM front tank/dual bed kit 7.5 L 1987—1997 020—01—08046 TFI front tank/standard bed kit Gas 1987—1997 020—01—08045 TFI front tank/dual bed kit 1987—2003 020—01—11736 TFI cross the bed tank with camper shell fillneck kit 1987—2003 020—01—11738 TFI cross the bed tank with camper shell fillneck kit 1987—1997 020—01—06941 Rear tank/standard bed kit 1987—1997 020—01—06942 Rear tank/dual bed kit 1987—1997 020—01—08050 TFI rear tank/standard bed kit 1987—1997 020—01—08049 TFI rear tank/dual bed kit 1990—1997 222—01—11518 OEM front tank kit for Trax systems Ford E—van 4.2 L 1992—2003 020—01—1 1764 OEM front tank supply and return transfer tube kit for generator set E150/250/350/450 4.6 L 1994—2003 020—01—11941 OEM aft tank E350/450 supply and return transfer tube kit for generator set 5.4 L. 1994—2003 020—01—11951 OEM aft tank E350/450 supply and return transfer tube kit for generator set 6.8 L 1999—2003 020—01—12204 OEM front tank supply tube kit‘for generator set 7.5 L Gas GM PU or 6.2 L 1990—2003 020—01—08275 OEM front and rear tank with formed fillneck Cab Chassis 6.5 L 1990—2003 020—01—09624 OEM front and rear OEM tank with straight fillneck Conversions to Diesel Flatbeds and Utility Boxes €1500/2500/3500/3500 HD K1500/2500/3500/3500 HD GM Sierra Sitverado PU 6.6 L. 2001—2003 020—01—11726 OEM front tank formed transfer tube kit and Cab Chassis Dicsel 1999—2003 020—01—11712 OEM front tank with straight fillneck and formed transfer tube for generator set Conversions to 1999—2003 ©20—01—11725 ‘OEM front tank with straight fillneck and formed transfer tube kit Flatbeds or Utility Boxes 1999—2003 222—01—11518 OEM front tank kit for Trax systems 1999—2003 020—01—1 1726 OEM front PU tank fast fill fillneck kit 1999—2003 020—01—11889 TFI front tankfillneck kit 1999—2003 020—01—12131 OEM front tank with straight fillneck and formed transfer tube kit GM PU or 4.3 L. 1990—1997 020—01—08276 OEM front and rear OEM tank with formed fillneck kit Cab Chassis 4.8 L 1990—1997 020—01—09625 OEM front and rear OBEM tank with straight fillneck kit Conversions to 5.3 L 1992—2002 020—01—11710 OEM front tank supply and return transfer tube kit for generator set Flatbeds or Utility Boxes 5.7 L 1999—2002 020—01—1 1763 OEM front tank supply and return transfer tube kit for generator set C 1500/2500/3500/ 6.0 L 1999—2002 020—01—11724 OEM front tank with straight fillneck and formed transfer tube kit 3500 HD/4500/5500 74 L 1999—2002 020—01—11971 OEM front tank supply tube kit for generator set K 1500/2500/3500/ 8.1 L 1999—2002 020—01—1 1976 OEM front tank supply and return transfer tube kit for generator set 3500 HD Gas Transfer Flow, Inc. — Replacement Fillneck Kits — D—288—37

(Page VEHICLE ENGINE MODEL KIT PART APPLICATION MAKE SIZE YEAR NUMBER ESCRIPTION GM G—van 4.3 L 1996—2002 020—01—11920 OEBM front tank supply and return transfer tube kit for generator set G1500/2500/3500 5.7 L 2001—2002 020—01—11969 OEM front tank supply tube kit for generator set GM G Cutaway Chassis 74 L 2002 020—01—12225 > OEM front tank fillneck kit Gas 2002 020—01—12226 OEM front tank fillneck kit Dodge PU * 5.9 L 1998—2002 020—01—1 1973 OEM front tank supply transfer tube kit for generator . 1500/2500/3500 8.0 L 1998—2002 020—01—11977 OEM front tank supply and return transfer tube kit for generator set Gas 2003 020—01—12360 OEM front tank fillneck kit Dodge PU 5.9 L 2003 020—01—12359 OEM front tank fillneck kit 1500/2500/3500 Diesel Dodge B—van 5.9 L 1998—2003 020—01—12052 —OEM front tank supply and return transfer tube kit for generator set 1500/2500/3500 ~—_ Gas Lerrmie Transfer Flow, Inc. — Replacement Fillneck Kits — D—288—37


Document Created: 2005-09-01 12:42:04
Document Modified: 2005-09-01 12:42:04

Previous E.O. D-288-36 | Previous E.O. D-287 | Next E.O. D-288-38 | Next E.O. D-289