Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on August 8, 2008.
As of Tuesday, September 17th, 2024 this Executive Order has not been overturned or superceeded.

Approved Parts

Part NumberModelsModificationRemarks
Series 310001999 to 2003 selected Honda LDT2NoneContact manufacturer or distributor for specific vehicle application

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-353-27
  • Executive Order 353-27 / D353-27
  • ARB # D-353-27
  • Executive Order No: D-353-27
  • C.A.R.B. No. D-353-27
  • Resolution D-353-27
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-353-27 PDF

D-353-27 Document:

CARB_D-353-27

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—353—27 Relating to Exemptions under Section 27156 of the Vehicle Code Miller Catalyzer Corporation "Series 31000 OBD 11 Compliant Three—way Catalytic Converter" WHEREAS, Vehicle Code Sections 27156 and Section 2222(h), Title 13, California Code of Regulations (hereafter "CCR"), authorize the California Air Resources Board and its Executive Officer to exempt new aftermarket catalytic converters from the prohibitions of Vehicle Code Section 27156. WHEREAS, Miller Catalyzer Corporation (Miller) of 3295 Depot Road, Hayward, California 94545, has applied to the Air Resources Board for exemption from the prohibitions in Vehicle Code Section 27156 to market its new aftermarket Series 31000 three—way catalytic converter (TWC) for installation on selected 1999 through 2003 model year Honda light—duty trucks 2 (LDT2) equipped with on—board diagnostic II (OBD—I1) systems as specified in Appendix D—353—27 and incorporated herein. The Series 31000 TWC will be used for single (one unit) exhaust system applications for selected Honda trucks. Series 31000 TWC may also be installed on non—OBD II vehicles (1995 and older) similar in engine and exhaust configuration to those listed in Appendix D—353—27. WHEREAS, pursuant to the authority vested in the Executive Officer by Health and Safety Code Section 39515 and in the Chief, Mobile Source Operations Division by Health and Safety Code Section 39516 and Executive Order G—02—003, Air Resources Board finds that the above aftermarket catalytic converter complies with the California Vehicle Code Section 27156 and Title 13, California Code of Regulations, Section 2222(h). The emissions performance of the catalytic converter was based on durability bench—aging by Delphi Energy and Chassis Systems using Air Resources Board—modified RAT—A bench—aging cycle for 100 hours, as specified in the "Optional Evaluation Procedures for New Aftermarket Non—original Equipment Catalytic Converters Equipped with On—Board Diagnostic II (OBD I1) Systems." ' WHEREAS, previous emissions and OBD 1 compatibility tests conducted by Miller Catalyzer Corporation using a vehicle of a weight classification similar to those listed in Appendix D—353—27 and certified to Low Emission Vehicle (LEV) standards resulted in the issuance of Executive Order D—353—13, it was determined that the installation of Series 31000 TWC on the vehicles listed in Appendix D—353—27 meets the requirements of California regulations. IT IS HEREBY RESOLVED that the above catalytic converter is exempt from the prohibitions in Vehicle Code Section 27156 for installation on the vehicles listed in Appendix D—353—27 subject to the following conditions: 1. No changes are permitted to the catalytic converter as described in the application for exemption. Any changes to the catalytic converteror any of its

—— 2o — components, and other factors addressed in this order must be evaluated and approved by the Air Resources Board prior to marketing in California. 2. Marketing of the catalytic converter using identifications other than those shown in the exemption application, and in this Executive Order, or marketing of the catalytic converter for application other than the ones shown in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. Exemption of these products shall not be construed as an exemption to sell, offer for sale, or advertise any components of the catalytic converter as individual devices. 3. Any oral or written references to this Executive Order or its content by Miller Catalyzer Corporation, its principals, agents, employees, distributors, dealers, or other representatives must include the disclaimer that the Executive Order or the exemption it provides is not an endorsement or approval of any emission reduction claims for the catalytic converter and is only a finding that the catalytic converter is exempt from the prohibitions of Vehicle Code Section 27156. 4. Miller Catalyzer Corporation‘s installation instructions for the new catalytic converter must conform to requirements in Paragraphs | and X of the "Optional Evaluation Procedures for New Aftermarket Non—original Equipment Catalytic Converters Equipped with On—Board Diagnostic !I (OBD I1) Systems." 5. Upon installation, the catalytic converter must carry a manufacturer‘s warranty for 50,000 miles on the substrates and 50,000 miles or five years on the shell and end pipes. 6. Miller Catalyzer Corporation and its vendors may not advertise the new aftermarket catalytic converter as a "high or easy flow" catalytic converter or use any phrase that could make them appear to perform better than an OEM catalytic converter. 7. The new aftermarket catalytic converter substrate may not be sold or supplied to a third party by Miller, its associates, vendors, other businesses, and individuals associated with Miller, to be assembled in a different facility and marketed under this Executive Order. 8. Any marketing arrangement of the new aftermarket catalytic converter by a third party, which involves the use of packaging identification different from the ones described in this Executive Order must be approved by Air Resources Board prior to shipment. 9. Miller must submit the required quality audit and production quantity reports for its aftermarket catalytic converter semi—annually, covering the periods January 1 through June 30, and July 1 through December 31. MILLER CATALYZER CORPORATION — CATALYTIC CONVERTER — D—353—27

Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a ten day written notice of intention to revoke it, during which : period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request, and the order may not be revoked until a determination is made, after the hearing, that grounds for revocation exist. P Executed at El Monte, California, this é day of August 2008. a 4 A Ns Annette Hebert, Chief obile Source Operations Division MILLER CATALYZER CORPORATION — CATALYTIC CONVERTER — D—353—27

APPENDIX D—353—27 Miller Catalyzer Corporation, Catalytic Converter Series 31000, Honda LDT2 Vans Model . ue & & Certification . Exhaust| Converter Total Monitored & . . No. Year Vehicle Model Engine Size| EngineFamily Level Weight Class Type Type |Converters| Converter Universal Direct Fit 1 1999 |Odyssey EX, Odyssey LX, Odyssey Van XHNXTO3.5EA3 2 2099 |Odyssey EX, Odyssey LX, Odyssey Van YHNXTO3.5EA3 3 2001 Odyssey EX, Odyssey LX, 3.5L 1HNXTO3. 5DP LEV LDT2 S L TWC 1 31000 TBD Odyssey Van 4| 2002_|Odyssey 2HNXTO03.51AP 5 2003 Honda Pilot 3HNXTO3.5DAP 6 Odyssey (LX, EX, EXL, Van) 3HNXTO3.5ZAP 07/18/08 1 of 1


Document Created: 2008-08-13 12:54:31
Document Modified: 2008-08-13 12:54:31

Previous E.O. D-353-26 | Previous E.O. D-352 | Next E.O. D-353-28 | Next E.O. D-354