Approval Details

Valid E.O.

Validity

This Executive Order approved the specified parts on on April 13, 2017.
As of Saturday, February 22nd, 2025 this Executive Order has not been overturned or superceeded.

Approved Parts

Part Number
See PDF

This Executive Order may be listed as:
  • C.A.R.B.E.O. D-411-12
  • Executive Order 411-12 / D411-12
  • ARB # D-411-12
  • Executive Order No: D-411-12
  • C.A.R.B. No. D-411-12
  • Resolution D-411-12
For Free CARB Executive Order Status verification, email an image of the device Executive Order label as well as the Year/Make/Model and Test Group # of the vehicle to [email protected]

Download: Executive Order D-411-12 PDF

D-411-12 Document:

CARB_D-411-12

State of California AIR RESOURCES BOARD EXECUTIVE ORDER D—411—12 Relating to Exemptions Under Section 27156 of the Vehicle Code Gibson Performance Corporation Performance Exhaust Headers Pursuant to the authority vested in the Air Resources Board by Section 27156 of the Vehicle Code; and Pursuant to the authority vested in the undersigned by Section 39515 and Section 39516 of the Health and Safety Code and Executive Order G—14—012; IT IS ORDERED AND RESOLVED: That the installation of the Performance Exhaust Headers manufactured and marketed by Gibson Performance Corporation of 1270 Webb Circle, Corona, California 92879, has been found not to reduce the effectiveness of required motor vehicle pollution control devices and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the 1991 through 2011 model year Chrysler passenger cars and trucks listed in Exhibit A. The Performance Exhaust Headers consists of tubular, short—length exhaust manifolds made of 16 gauge steel, and the corresponding assembly hardware. As applicable, oxygen sensors and exhaust gas recirculation sensors are removed from the stock manifold and installed on similar locations on the Performance Exhaust Headers. All other emission—related components are in their stock location. The header kit is available in chrome, stainless steel or ceramic—coated steel. Marketing of these devices using any identification other than that shown in this Executive Order or marketing of this device for an application other than those listed in this Executive Order shall be prohibited unless prior approval is obtained from the Air Resources Board. This Executive Order is valid provided that the installation instructions for the Ford Exhaust Header Kit will not recommend tuning the vehicle to specifications different from those of the vehicle manufacturer. Changes made to the design or operating conditions of the devices, as exempted by the Air Resources Board, that adversely affect the performance of a vehicle‘s pollution control system shall invalidate this Executive Order.

This Executive Order does not constitute any opinion as to the effect that the use of these devices may have on any warranty either expressed or implied by the vehicle manufacturer. This exemption is issued based on prior data submitted from Gibson Performance Corporation in support of other Gibson Performance Corporation‘s Executive Orders. In addition, the Air Resources Board reserves the right in the future to review this Executive Order and the exemption provided herein to assure that the exempted add—on or modified part continues to meet the standards and procedures of Title 13, California Code of Regulations, Section 2222, et seq. THIS EXECUTIVE ORDER DOES NOT CONSTITUTE A CERTIFICATION, ACCREDITATION, APPROVAL, OR ANY OTHER TYPE OF ENDORSEMENT BY THE AIR RESOURCES BOARD OF ANY CLAIMS OF THE APPLICANT CONCERNING ANTI—POLLUTION BENEFITS OR ANY ALLEGED BENEFITS OF THE PERFORMANCE EXHAUST HEADERS. No claims of any kind, such as "Approved by the Air Resources Board" may be made with respect to the action taken herein in any advertising or other oral or written communication. Violation of any of the above conditions shall be grounds for revocation of this order. The order may be revoked only after a ten day written notice of intention to revoke the order, in which period the holder of the order may request in writing a hearing to contest the proposed revocation. If a hearing is requested, it shall be held within ten days of receipt of the request and the order may not be revoked until a determination is made after the hearing that grounds for revocation exist. Executed at El Monte, California, this )3 day of April 2017. Annette Hebert, Chief Emissions Compliance, Automotive Regulations and Science Division GIBSON PERFORMANCE CORPORATION — PERFORMANCE EXHAUST HEADERS — D—411—12

Exhibit A (E.0.# D—411—12) CHRYSLER MCLC ENGINE SIZE 2/4WD TUBE CHROME STAINLESS CERAMIC 300C [o4—09 5.7L |2wp [1—1/2" |N/A [N/A |ep31i4s—C DODGE CHARGER [o6—09 [5.7L |2wp [1—1/2" [N/A [N/A [ep3i4s—c CHALLENGER [2009 [5.7L [2wD [1—1/2" N/A [N/A |ep31i4s—c MAGNUM WAGON [o4—09 [5.7L [2wo [1—1/2" [N/A [N/A [ep314Ss—C DAKOTA 96—03 3.9L 2WD 1—1/2" GP306 GP306S GP306S—C 04—06 4.7L 2/4WD 1—1/2" GP316 GPp316S GP316S—C 00—03 4.7L 2/4WD 1—1/2" GP307 GP307S GP307S—C 96—03 5.2L 2/4WD 1—1/2" Gp301 GP301S GP301S5—C 92—95 5.2L 2/4WD 1—1/2" GP300 GP3008 GP300S—C 96—03 5.91 2/4WD 1—1/2" Gp301 GP301S GP301S—C 92—95 5.91 2/4WD 1—1/2" GP300 GP300S GP300S—C DURANGO 00—03 4.7L 2/4WD 1—1/2" GP308 GP308S GP308S—C 96—03 5.2L 2/4WD 1—1/2" GP301 GP301S GP301S—C 96—03 5.91 2/4WD 1—1/2" GP301 Gp301S GP301S—C 04—06 5.7L 2WD N/A N/A N/A GP3175—C RAM TRUCK 1500 04—07 4.7L 2/4WD 1—1/2" GP316 GP316S GP316S—C 02—03 4.7L 2/4 WD 1—1/2" GP309 GPp309S GP309S—C 96—03 5.2L 2/4WD 1—1/2" GP301 GP301S GP301S—C 92—95 5.2L 2/4WD 1—1/2" GP300 Gp3008S GP300S—C 03—08 5.7L 2/4WD N/A N/A N/A GP3115—C 96—03 5.91 2/4WD 1—1/2" GP301 Gp301S GP301S—C 92—95 5.91 2/4WD 1—1/2" GP300 GP3008s GP300S—C 04—05 8.3L SRT 2WD 1—1/2" N/A GP31i2S GP312S—C RAM TRUCK 2500/3500 96—02 8.0L 2/4WD 1—1/2" GP304 GP304S GP304S—C 04—05 5.7L 2 WD N/A N/A N/A GP311S—C 2003 5.7L 2/4WD 1—1/2" GP310 Gp310S GP310S—C JEEP CHEROKEE [a1—99 [4.0L [2/4wD [1—1/2" [GP400 |ep40os |er400Ss—C GRAND CHEROKEE [93—99 [4.0L [2/4 wp [1—1/2" |er400 [Gr4oos |ep400s—C WRANGLER 91—99 4.0L TJ,¥J 4WD 1—1/2" GP400 Gp400Ss GP400S—C 07—11 3.8L 1—1/2" GP403 GP403S GP403S—C GIBSON PERFORMANCE CORPORATION — PERFORMANCE EXHAUST HEADERS — D 411—12



Document Created: 2017-07-18 08:39:14
Document Modified: 2017-07-18 08:39:14

Previous E.O. D-411-11 | Previous E.O. D-410 | Next E.O. D-411-13 | Next E.O. D-412